Through-Wall Communicatin of Low-Rate Digital Data Using Ultrasound

Wireless communication is ineffective for communicating through a solid steel wall due to the shielding effect of the metal. In some cases, holes can be made in the wall to allow wires to pass through, enabling the transport of electronic data. However, holes are often undesirable because they can reduce the integrity of the wall. This paper describes several approaches for using ultrasound to communicate low-rate digital data through a steel wall. The techniques minimize the complexity and power consumption of the communications hardware on the side of the wall from which the data is being sent, supporting applications in which a sensor may be either permanently embedded in a structure or is difficult to reach for servicing. Both pulsed and continuous-wave ultrasound techniques are described. Experimental data is presented showing the performance of the techniques when implemented using 1 MHz transducers mounted on a 15.24 cm (6 inch) thick steel wall. The results show that data rates on the order of 500 bits per second are readily available using simple communications techniques. Higher rates are possible if equalization is used to mitigate the effects of the multipath propagation within the steel block

The SIPHER consortium : introducing the new UK hub for systems science in public health and health economic research

The conditions in which we are born, grow, live, work and age are key drivers of health and inequalities in life chances. To maximise health and wellbeing across the whole population, we need well-coordinated action across government sectors, in areas including economic, education, welfare, labour market and housing policy. Current research struggles to offer effective decision support on the cross-sector strategic alignment of policies, and to generate evidence that gives budget holders the confidence to change the way major investment decisions are made. This open letter introduces a new research initiative in this space. The SIPHER (Systems Science in Public Health and Health Economics Research) Consortium brings together a multi-disciplinary group of scientists from across six universities, three government partners at local, regional and national level, and ten practice partner organisations. The Consortium’s vision is a shift from health policy to healthy public policy, where the wellbeing impacts of policies are a core consideration across government sectors. Researchers and policy makers will jointly tackle fundamental questions about: a) the complex causal relationships between upstream policies and wellbeing, economic and equality outcomes; b) the multi-sectoral appraisal of costs and benefits of alternative investment options; c) public values and preferences for different outcomes, and how necessary trade-offs can be negotiated; and d) creating the conditions for intelligence-led adaptive policy design that maximises progress against economic, social and health goals. Whilst our methods will be adaptable across policy topics and jurisdictions, we will initially focus on four policy areas: Inclusive Economic Growth, Adverse Childhood Experiences, Mental Wellbeing and Housing

Interfacial Chemistry in Al/CuO Reactive Nanomaterial and Its Role in Exothermic Reaction.

Interface layers between reactive and energetic materials in nanolaminates or nanoenergetic materials are believed to play a crucial role in the properties of nanoenergetic systems. Typically, in the case of Metastable Interstitial Composite nanolaminates, the interface layer between the metal and oxide controls the onset reaction temperature, reaction kinetics, and stability at low temperature. So far, the formation of these interfacial layers is not well understood for lack of in situ characterization, leading to a poor control of important properties. We have combined in situ infrared spectroscopy and ex situ X-ray photoelectron spectroscopy, differential scanning calorimetry, and high resolution transmission electron microscopy, in conjunction with firstprinciples calculations to identify the stable configurations that can occur at the interface and determine the kinetic barriers for their formation. We find that (i) an interface layer formed during physical deposition of aluminum is composed of a mixture of Cu, O, and Al through Al penetration into CuO and constitutes a poor diffusion barrier (i.e., with spurious exothermic reactions at lower temperature), and in contrast, (ii) atomic layer deposition (ALD) of alumina layers using trimethylaluminum (TMA)produces a conformal coating that effectively prevents Al diffusion even for ultrathin layer thicknesses (∼0.5 nm), resulting in better stability at low temperature and reduced reactivity. Importantly, the initial reaction of TMA with CuO leads to the extraction of oxygen from CuO to form an amorphous interfacial layer that is an important component for superior protection properties of the interface and is responsible for the high system stability. Thus, while Al e-beam evaporation and ALD growth of an alumina layer on CuO both lead to CuO reduction, the mechanism for oxygen removal is different, directly affecting the resistance to Al diffusion. This work reveals that it is the nature of the monolayer interface between CuO and alumina/Al rather than the thickness of the alumina layer that controls the kinetics of Al diffusion, underscoring the importance of the chemical bonding at the interface in these energetic materials

Public awareness of the link between alcohol and cancer in England in 2015: A population-based survey

Background: Public knowledge of the association between alcohol and cancer is reported to be low. We aimed to provide up-to-date evidence for England regarding awareness of the link between alcohol and different cancers and to determine whether awareness differs by demographic characteristics, alcohol use, and geographic region. Methods: A representative sample of 2100 adults completed an online survey in July 2015. Respondents were asked to identify which health outcomes, including specific cancers, may be caused by alcohol consumption. Logistic regressions explored whether demographic, alcohol use, and geographic characteristics predicted correctly identifying alcohol-related cancer risk. Results: Unprompted, 12.9% of respondents identified cancer as a potential health outcome of alcohol consumption. This rose to 47% when prompted (compared to 95% for liver disease and 73% for heart disease). Knowledge of the link between alcohol and specific cancers varied between 18% (breast) and 80% (liver). Respondents identified the following cancers as alcohol-related where no such evidence exists: bladder (54%), brain (32%), ovarian (17%). Significant predictors of awareness of the link between alcohol and cancer were being female, more highly educated, and living in North-East England. Conclusion: There is generally low awareness of the relationship between alcohol consumption and cancer, particularly breast cancer. Greater awareness of the relationship between alcohol and breast cancer in NorthEast England, where a mass media campaign highlighted this relationship, suggests that population awareness can be influenced by social marketing

Isocyanide substitution in octadecacarbonyl hexaosmium

The crystal structures of the two isocyanide substituted hexaosmium clusters, Os6 (CO)18 (CNC6 H4 Me)2 and Os6 (CO)16 (CNCMe3)2 are reported. The former involves both a triple bridging and a terminal isonitrile group whilst the latter is related to the parent carbonyl Os6 (CO)18. The molecular structures are discussed in terms of electronic inequivalences within the metal cluster framework