Simulation of Cavity Flow by the Lattice Boltzmann Method

A detailed analysis is presented to demonstrate the capabilities of the lattice Boltzmann method. Thorough comparisons with other numerical solutions for the two-dimensional, driven cavity flow show that the lattice Boltzmann method gives accurate results over a wide range of Reynolds numbers. Studies of errors and convergence rates are carried out. Compressibility effects are quantified for different maximum velocities, and parameter ranges are found for stable simulations. The paper's objective is to stimulate further work using this relatively new approach for applied engineering problems in transport phenomena utilizing parallel computers.Comment: Submitted to J. Comput. Physics, late

Consistency conditions for regulatory analysis of financial institutions: a comparison of frontier efficiency methods

We propose a set of consistency conditions that frontier efficiency measures should meet to be most useful for regulatory analysis or other purposes. The efficiency estimates should be consistent in their efficiency levels, rankings, and identification of best and worst firms, consistent over time and with competitive conditions in the market, and consistent with standard nonfrontier measures of performance. We provide evidence on these conditions by evaluating and comparing efficiency estimates on U.S. bank efficiency from variants of all four of the major approaches -- DEA, SFA, TFA, and DFA -- and find mixed results.Financial institutions ; Bank supervision

Static Torsion Testing and Modeling of a Variable Thickness Hybrid Composite Bull Gear

Torsional strength of a variable thickness hybrid gear web was measured by performing static testing on the part in a large torsion test frame. The outer rim of the hybrid gear web was fixed to the bottom of the test frame and loading was applied to the web through a shaft. The test setup included the installation of digital image correlation (DIC) systems to obtain deformation and strain measurements from the surfaces of the hybrid gear web and the mechanical test equipment to ensure reliability of the test. The results indicated that the variable thickness hybrid gear web achieved approximately twice the torsional strength compared to that of previous hybrid gear designs. The DIC analysis showed significantly more straining of the loading shaft than the actual test article. Additionally, the results demonstrated the importance and affect that the metallic, lobed interlock features had on the principal strain and out-of-plane displacement fields. The analysis revealed that the fixed outer rim was in fact rotating and a rigid body motion compensation (RBMC) function was computed to determine the actual rotation of the hub and composite web relative to the outer rim. Modeling simulations were performed for the variable thickness hybrid gear web and correlated well with the RBMC rotational deformation seen in the DIC analysis. In addition to benchmarking the load capacity of the hybrid gear web, measuring its strength is useful information to define the parameters needed for dynamic, endurance, and other testing of the part

Type I vs type II spiral ganglion neurons exhibit differential survival and neuritogenesis during cochlear development

<p>Abstract</p> <p>Background</p> <p>The mechanisms that consolidate neural circuitry are a major focus of neuroscience. In the mammalian cochlea, the refinement of spiral ganglion neuron (SGN) innervation to the inner hair cells (by type I SGNs) and the outer hair cells (by type II SGNs) is accompanied by a 25% loss of SGNs.</p> <p>Results</p> <p>We investigated the segregation of neuronal loss in the mouse cochlea using β-tubulin and peripherin antisera to immunolabel all SGNs and selectively type II SGNs, respectively, and discovered that it is the type II SGN population that is predominately lost within the first postnatal week. Developmental neuronal loss has been attributed to the decline in neurotrophin expression by the target hair cells during this period, so we next examined survival of SGN sub-populations using tissue culture of the mid apex-mid turn region of neonatal mouse cochleae. In organotypic culture for 48 hours from postnatal day 1, endogenous trophic support from the organ of Corti proved sufficient to maintain all type II SGNs; however, a large proportion of type I SGNs were lost. Culture of the spiral ganglion as an explant, with removal of the organ of Corti, led to loss of the majority of both SGN sub-types. Brain-derived neurotrophic factor (BDNF) added as a supplement to the media rescued a significant proportion of the SGNs, particularly the type II SGNs, which also showed increased neuritogenesis. The known decline in BDNF production by the rodent sensory epithelium after birth is therefore a likely mediator of type II neuron apoptosis.</p> <p>Conclusion</p> <p>Our study thus indicates that BDNF supply from the organ of Corti supports consolidation of type II innervation in the neonatal mouse cochlea. In contrast, type I SGNs likely rely on additional sources for trophic support.</p

Interim Guidelines for Design of Highway Pavements

The adequacy of a pavement design is directly related to the accuracy of traffic data, axle load information and materials data. It is assumed that appropriate construction procedures will be employed and that the pavements will be maintained periodically during the course of their service lives. It is assumed that the subgrade will be constructed at or near the optimum moisture content and to the maximum dry density as specified in appropriate standard specifications. It is also assumed that the base course materials meet design requirements, that the aggregates will meet soundness and durability requirements and that the aggregate base will be compacted to specified densities. Pavement layers should meet mixture design requirements and be compacted to specified densities. The construction process should be structured to provide as homogenous a pavement layer as practical within the limits of existing construction practices. In the event it is not possible to construct pavements to meet design assumptions, pavement designs should be modified to reflect actual construction conditions. Most pavement thickness design procedures (including. the Kentucky procedures) are founded on the assumptions that quality materials will be used to construct the pavement, that appropriate construction conditions exist, and that appropriate construction procedures will be used. It is possible to develop pavement thickness designs for less than ideal conditions or for marginal materials. Examples of pavement designs involving marginal materials include those pavement designs wherein by-product (waste) materials have been used in one or more layers of the pavement structure. The level of pavement performance associated with a given thickness design also presumes some level of routine pavement maintenance. Designs may be modified to reflect other levels of maintenance such as the zero maintenance concept. This interim design guide addresses only pavement designs presuming adequate subgrade construction conditions, appropriate construction techniques for aggregate and pavement layers, accurate information concerning the strengths and quality of materials used in the pavement, and accurate information concerning the magnitude and quantity of loads for which the pavement is designed to accommodate. Alternate design strategies should be used in the event these assumptions are violated

Method for Monitoring Quality of Extension Programs: A Dashboard Construction Process

We describe a process for construction and use of a dashboard for monitoring the quality of in-person nonformal education programs. We followed the process to develop a 4-H special interest (SPIN) club dashboard, but the steps are applicable to any education program that includes instruction over multiple sessions. The dashboard construction process comprises selecting performance measures, choosing data collection strategies, designing the content and layout of the dashboard, collecting data, and populating the dashboard with performance metrics. Although these process steps are intuitive, specific decision options within each step can be complex. Our article includes discussion of these complexities in the context of our SPIN club application

Evaporation of Lennard-Jones Fluids

Evaporation and condensation at a liquid/vapor interface are ubiquitous interphase mass and energy transfer phenomena that are still not well understood. We have carried out large scale molecular dynamics simulations of Lennard-Jones (LJ) fluids composed of monomers, dimers, or trimers to investigate these processes with molecular detail. For LJ monomers in contact with a vacuum, the evaporation rate is found to be very high with significant evaporative cooling and an accompanying density gradient in the liquid domain near the liquid/vapor interface. Increasing the chain length to just dimers significantly reduces the evaporation rate. We confirm that mechanical equilibrium plays a key role in determining the evaporation rate and the density and temperature profiles across the liquid/vapor interface. The velocity distributions of evaporated molecules and the evaporation and condensation coefficients are measured and compared to the predictions of an existing model based on kinetic theory of gases. Our results indicate that for both monatomic and polyatomic molecules, the evaporation and condensation coefficients are equal when systems are not far from equilibrium and smaller than one, and decrease with increasing temperature. For the same reduced temperature $T/T_c$, where $T_c$ is the critical temperature, these two coefficients are higher for LJ dimers and trimers than for monomers, in contrast to the traditional viewpoint that they are close to unity for monatomic molecules and decrease for polyatomic molecules. Furthermore, data for the two coefficients collapse onto a master curve when plotted against a translational length ratio between the liquid and vapor phase.Comment: revised version, 15 pages, 15 figures, to appear in J. Chem. Phy

Type II spiral ganglion afferent neurons drive medial olivocochlear reflex suppression of the cochlear amplifier.

The dynamic adjustment of hearing sensitivity and frequency selectivity is mediated by the medial olivocochlear efferent reflex, which suppresses the gain of the 'cochlear amplifier' in each ear. Such efferent feedback is important for promoting discrimination of sounds in background noise, sound localization and protecting the cochleae from acoustic overstimulation. However, the sensory driver for the olivocochlear reflex is unknown. Here, we resolve this longstanding question using a mouse model null for the gene encoding the type III intermediate filament peripherin (Prph). Prph((-/-)) mice lacked type II spiral ganglion neuron innervation of the outer hair cells, whereas innervation of the inner hair cells by type I spiral ganglion neurons was normal. Compared with Prph((+/+)) controls, both contralateral and ipsilateral olivocochlear efferent-mediated suppression of the cochlear amplifier were absent in Prph((-/-)) mice, demonstrating that outer hair cells and their type II afferents constitute the sensory drive for the olivocochlear efferent reflex

Hierarchical Bayesian Spatio-Temporal Analysis of Climatic and Socio-Economic Determinants of Rocky Mountain Spotted Fever

Citation: Raghavan, R. K., Goodin, D. G., Neises, D., Anderson, G. A., & Ganta, R. R. (2016). Hierarchical Bayesian Spatio-Temporal Analysis of Climatic and Socio-Economic Determinants of Rocky Mountain Spotted Fever. Plos One, 11(3), 17. doi:10.1371/journal.pone.0150180This study aims to examine the spatio-temporal dynamics of Rocky Mountain spotted fever (RMSF) prevalence in four contiguous states of Midwestern United States, and to determine the impact of environmental and socio-economic factors associated with this disease. Bayesian hierarchical models were used to quantify space and time only trends and spatio-temporal interaction effect in the case reports submitted to the state health departments in the region. Various socio-economic, environmental and climatic covariates screened a priori in a bivariate procedure were added to a main-effects Bayesian model in progressive steps to evaluate important drivers of RMSF space-time patterns in the region. Our results show a steady increase in RMSF incidence over the study period to newer geographic areas, and the posterior probabilities of county-specific trends indicate clustering of high risk counties in the central and southern parts of the study region. At the spatial scale of a county, the prevalence levels of RMSF is influenced by poverty status, average relative humidity, and average land surface temperature (> 35 degrees C) in the region, and the relevance of these factors in the context of climate-change impacts on tick-borne diseases are discussed

Molecular Dynamics Simulation Study of Nonconcatenated Ring Polymers in a Melt: I. Statics

Molecular dynamics simulations were conducted to investigate the structural properties of melts of nonconcatenated ring polymers and compared to melts of linear polymers. The longest rings were composed of N=1600 monomers per chain which corresponds to roughly 57 entanglement lengths for comparable linear polymers. For the rings, the radius of gyration squared was found to scale as N to the 4/5 power for an intermediate regime and N to the 2/3 power for the larger rings indicating an overall conformation of a crumpled globule. However, almost all beads of the rings are "surface beads" interacting with beads of other rings, a result also in agreement with a primitive path analysis performed in the following paper (DOI: 10.1063/1.3587138). Details of the internal conformational properties of the ring and linear polymers as well as their packing are analyzed and compared to current theoretical models.Comment: 15 pages, 14 figure