12,458 research outputs found
Geochemistry and risk assessment of street dust in Luanda, Angola, a tropical urban environment
A total of 92 samples of street dust were collected in Luanda, Angola, were sieved below 100 μm, and analysed by ICP-MS for 35 elements after an aqua-regia digestion. The concentration and spatial heterogeneity of trace elements in the street dust of Luanda are generally lower than in most industrialized cities in the Northern hemisphere. These observations reveal a predominantly “natural” origin for the street dust in Luanda, which is also manifested in that some geochemical processes that occur in natural soils are preserved in street dust: the separation of uranium from thorium, and the retention of the former by carbonate materials, or the high correlation between arsenic and vanadium due to their common mode of adsorption on solid particles in the form of oxyanions. The only distinct anthropogenic fingerprint in the composition of Luanda's street dust is the association Pb–Cd–Sb–Cu (and to a lesser extent, Ba–Cr–Zn). The use of risk assessment strategies has proved helpful in identifying the routes of exposure to street dust and the trace elements therein of most concern in terms of potential adverse health effects. In Luanda the highest levels of risk seem to be associated (a) with the presence of As and Pb in the street dust and (b) with the route of ingestion of dust particles, for all the elements included in the study except Hg, for which inhalation of vapours presents a slightly higher risk than ingestion. However, given the large uncertainties associated with the estimates of toxicity values and exposure factors, and the absence of site-specific biometric factors, these results should be regarded as preliminary and further research should be undertaken before any definite conclusions regarding potential health effects are drawn
Henry-Rusell Hitchcock y Philip Johnson: The International Style: architecture since 1922 , y otros textos. La Bauhaus en la crítica de Hitchcock
Henry-Rusell Hitchcock y Philip Johnson: The International Style: architecture since 1922 , y otros textos. La Bauhaus en la crítica de Hitchcoc
Effective tools for translating popular science
Este trabajo de fin de grado consiste en la traducción de tres artículos científicos
divulgativos, que tratan sobre la enfermedad del Alzheimer. Para la elaboración de
este trabajo, primero se analizarán los tres textos originales con el fin de identificar sus
principales características. Para traducir los textos se usará una herramienta de
traducción automática, que permite utilizar a su vez una memoria de traducción y un
glosario. Para ellos se elaborará una memoria de traducción, cuyos textos se escogerán
siguiendo las características de los textos originales. Además, se utilizarán otras
herramientas, como glosarios especializados y diferentes tipos de corpus, para buscar
o confirmar términos equivalentes apropiados y colocaciones. Además de ofrecer las
traducciones, se explicarán las dificultades que se encuentren en el proceso de
traducción, y también se presentará un glosario creado para este trabajo.Departamento de Filología InglesaGrado en Estudios Inglese
Key Production Parameters to Obtain Transparent Nanocellular PMMA
Transparent nanocellular polymethylmethacrylate (PMMA) with relative density around 0.4 is produced for the first time by using the gas dissolution foaming technique. The processing conditions and the typical characteristics of the cellular structure needed to manufacture this novel material are discovered. It is proved that low saturation temperatures (−32 °C) combined with high saturation pressures (6, 10, 20 MPa) allow increasing the solubility of PMMA up to values not reached before. In particular, the highest CO2 uptake ever reported for PMMA, (i.e., 48 wt%) is found for a saturation pressure of 20 MPa and a saturation temperature of −32 °C. Due to these processing conditions, cell nucleation densities of 1016 nuclei cm−3 and cell sizes clearly below 50 nm are achieved. The nanocellular polymers obtained, with cell sizes ten times smaller than the wavelength of visible light and very homogeneous cellular structures, show a significant transparency
Las TICS aplicadas a las necesidades educativas especiales
Durante todo el proceso en el que he desarrollado mi trabajo he intentado descubrir los beneficios que aportan la Nuevas Tecnologías en el proceso de enseñanza – aprendizaje en un centro específico de educación especial, tomando como punto de partida mi propia práctica docente y experiencia personal.
Me interesa conocer los beneficios que aportan las Nuevas Tecnologías a los alumnos con Necesidades Educativas Especiales y como favorecen su desarrollo integral y su integración en la sociedad.
Por último, es una forma de enfocar el compromiso de toda una comunidad educativa en la inclusión de las nuevas tecnologías en su tarea docente, no sólo porque son unas herramientas útiles sino por la actualización de la Escuela al progreso tecnológicoGrado en Educación Primari
PI-based controller for low-power distributed inverters to maximise reactive current injection while avoiding over voltage during voltage sags
This paper is a postprint of a paper submitted to and accepted for publication in
IET Power Electronics and is subject to Institution of Engineering and Technology Copyright. The copy of record is
available at the IET Digital Library.In the recently deregulated power system scenario, the growing number of distributed generation sources should be considered as an opportunity to improve stability and power quality along the grid. To make progress in this direction, this work proposes a reactive current injection control scheme for distributed inverters under voltage sags. During the sag, the inverter injects, at least, the minimum amount of reactive current required by the grid code. The flexible reactive power injection ensures that one phase current is maintained at its maximum rated value, providing maximum support to the most faulted phase voltage. In addition, active power curtailment occurs only to satisfy the grid code reactive current requirements. As well as, a voltage control loop is implemented to avoid overvoltage in non-faulty phases, which otherwise would probably occur due to the injection of reactive current into an inductive grid. The controller is proposed for low-power rating distributed inverters where conventional voltage support provided by large power plants is not available. The implementation of the controller provides a low computational burden because conventional PI-based control loops may apply. Selected experimental results are reported in order to validate the effectiveness of the proposed control scheme.Peer ReviewedPostprint (updated version
Rheological and hydration characterization of calcium sulfoaluminate cement pastes
Calcium sulfoaluminate (CSA) cements are currently receiving a lot of attention because their manufacture produces less CO2 than ordinary Portland cement (OPC). However, it is essential to
understand all parameters which may affect the hydration processes. This work deals with the study of the effect of several parameters, such as superplasticizer (SP), gypsum contents (10, 20 and 30 wt%) and w/c ratio (0.4 and 0.5), on the properties of CSA pastes during early hydration. This characterization has been performed through rheological studies, Rietveld quantitative phase
analysis of measured x-ray diffraction patterns, thermal analysis and mercury porosimetry for
pastes, and by compressive strength measurements for mortars. The effect of the used SP on the
rheological properties has been established. Its addition makes little difference to the amount of
ettringite formed but strongly decreases the large pore fraction in the pastes. Furthermore, the SP role on compressive strength is variable, as it increases the values for mortars containing 30 wt% gypsum but decreases the strengths for mortars containing 10 wt% gypsum.This work has been supported by Spanish Ministry of Science and Innovation through MAT2010-
16213 research grant, which is co-funded by FEDER, and Ramón y Cajal Fellowship (RYC-2008-
03523)
Hypercube algorithms on mesh connected multicomputers
A new methodology named CALMANT (CC-cube Algorithms on Meshes and Tori) for mapping a type of algorithm that we call CC-cube algorithm onto multicomputers with hypercube, mesh, or torus interconnection topology is proposed. This methodology is suitable when the initial problem can be expressed as a set of processes that communicate through a hypercube topology (a CC-cube algorithm). There are many important algorithms that fit into the CC-cube type. CALMANT is based on three different techniques: (a) the standard embedding to assign the processes of the algorithm to the nodes of the mesh multicomputer; (b) the communication pipelining technique to increase the level of communication parallelism inherent in the CC-cube algorithms; and (c) optimal message-scheduling algorithms proposed in this work in order to avoid conflicts and minimizing in this way the communication time. Although CALMANT is proposed for multicomputers with different interconnection network topologies, the paper only focuses on the particular case of meshes.Peer ReviewedPostprint (published version
A study of the communication cost of the FFT on torus multicomputers
The computation of a one-dimensional FFT on a c-dimensional torus multicomputer is analyzed. Different approaches are proposed which differ in the way they use the interconnection network. The first approach is based on the multidimensional index mapping technique for the FFT computation. The second approach starts from a hypercube algorithm and then embeds the hypercube onto the torus. The third approach reduces the communication cost of the hypercube algorithm by pipelining the communication operations. A novel methodology to pipeline the communication operations on a torus is proposed. Analytical models are presented to compare the different approaches. This comparison study shows that the best approach depends on the number of dimensions of the torus and the communication start-up and transfer times. The analytical models allow us to select the most efficient approach for the available machine.Peer ReviewedPostprint (published version
Hydration studies of calcium sulfoaluminate cements blended with fly ash
The main objective of this work is to study the hydration and properties of calciumsulfoaluminate cement pastes
blended with fly ash (FA) and the corresponding mortars at different hydration ages. Laboratory X-ray powder
diffraction, rheological studies, thermal analysis, porosimetry and compressive strength measurements were
performed. The analysis of the diffraction data by Rietveld method allowed quantifying crystalline phases and
overall amorphous contents. The studied parameters were: i) FA content, 0, 15 and 30 wt.%; and ii) water addition,
water-to-CSA mass ratio (w/CSA = 0.50 and 0.65), and water-to-binder mass ratio (w/b = 0.50). Finally,
compressive strengths after 6 months of 0 and 15 wt.% FA [w/CSA = 0.50] mortars were similar: 73 ± 2 and
72 ± 3 MPa, respectively. This is justified by the filler effect of the FA as no strong evidences of reactivity of FA
with CSA were observed. These results support the partial substitution of CSA cements with FA with the economic
and environmental benefitsThis work has been supported by Spanish MINECO through MAT2010-16213 research grant, which is co-funded by FEDER. I. Santacruz thanks a Ramón y Cajal fellowship, RYC-2008-03523
- …