Calcium sulfoaluminate (CSA) cements are currently receiving a lot of attention because their manufacture produces less CO2 than ordinary Portland cement (OPC). However, it is essential to
understand all parameters which may affect the hydration processes. This work deals with the study of the effect of several parameters, such as superplasticizer (SP), gypsum contents (10, 20 and 30 wt%) and w/c ratio (0.4 and 0.5), on the properties of CSA pastes during early hydration. This characterization has been performed through rheological studies, Rietveld quantitative phase
analysis of measured x-ray diffraction patterns, thermal analysis and mercury porosimetry for
pastes, and by compressive strength measurements for mortars. The effect of the used SP on the
rheological properties has been established. Its addition makes little difference to the amount of
ettringite formed but strongly decreases the large pore fraction in the pastes. Furthermore, the SP role on compressive strength is variable, as it increases the values for mortars containing 30 wt% gypsum but decreases the strengths for mortars containing 10 wt% gypsum.This work has been supported by Spanish Ministry of Science and Innovation through MAT2010-
16213 research grant, which is co-funded by FEDER, and Ramón y Cajal Fellowship (RYC-2008-
03523)
