108 research outputs found

    Magnetic properties of Er-doped ZnO films prepared by reactive magnetron sputtering

    Get PDF
    All Zn1−x Er x O (x=0.04, 0.05, and 0.17) films deposited on glass substrates by radio-frequency reactive magnetron sputtering exhibit the mixture of ferromagnetic and paramagnetic phases at room temperature. The estimated magnetic moment per Er ion decreases with the increase of Er concentration. The temperature dependence of the magnetization indicates that there is no intermetallic ErZn buried in the films. The ferromagnetism is attributed to the Er ions substitution for Zn2+ in ZnO lattices, and it can be interpreted by the bound-magnetic-polaron model

    Impact of air pollution control measures and regional transport on carbonaceous aerosols in fine particulate matter in urban Beijing, China : insights gained from long-term measurement

    Get PDF
    As major chemical components of airborne fine particulate matter (PM2.5), organic carbon (OC) and elemental carbon (EC) have vital impacts on air quality, climate change, and human health. Because OC and EC are closely associated with fuel combustion, it is helpful for the scientific community and policymakers assessing the efficacy of air pollution control measures to study the impact of control measures and regional transport on OC and EC levels. In this study, hourly mass concentrations of OC and EC associated with PM2.5 were semi-continuously measured from March 2013 to February 2018. The results showed that annual mean OC and EC concentrations declined from 14.0 to 7.7 mu g m(3) and from 4.0 to 2.6 mu g m(3), respectively, from March 2013 to February 2018. In combination with the data of OC and EC in previous studies, an obvious decreasing trend in OC and EC concentrations was found, which was caused by clean energy policies and effective air pollution control measures. However, no obvious change in the ratios of OC and EC to the PM2.5 mass (on average, 0.164 and 0.049, respectively) was recorded, suggesting that inorganic ions still contributed a lot to PM2.5. Based on the seasonal variations in OC and EC, it appeared that higher OC and EC concentrations were still observed in the winter months, with the exception of winter of 2017-2018. Traffic policies executed in Beijing resulted in nighttime peaks of OC and EC, caused by heavy-duty vehicles and heavy-duty diesel vehicles being permitted to operate from 00:00 to 06:00 (China standard time, UTC + 8, for all times throughout the paper). In addition, the fact that there was no traffic restriction in weekends led to higher concentrations on weekends compared to weekdays. Significant correlations between OC and EC were observed throughout the study period, suggesting that OC and EC originated from common emission sources, such as exhaust of vehicles and fuel combustion. OC and EC levels increased with enhanced SO2, CO, and NOx concentrations while the O-3 and OC levels were enhanced simultaneously when O-3 concentrations were higher than 50 mu g m(-3). Non-parametric wind regression analysis was performed to examine the sources of OC and EC in the Beijing area. It was found that there were distinct hot spots in the northeast wind sector at wind speeds of approximately 0-6 km h(-1), as well as diffuse signals in the southwestern wind sectors. Source areas further away from Beijing were assessed by potential source contribution function (PSCF) analysis. A high-potential source area was precisely pinpointed, which was located in the northwestern and southern areas of Beijing in 2017 instead of solely in the southern areas of Beijing in 2013. This work shows that improvement of the air quality in Beijing benefits from strict control measures; however, joint prevention and control of regional air pollution in the regions is needed for further improving the air quality. The results provide a reference for controlling air pollution caused by rapid economic development in developing countries

    The carbonaceous aerosol levels still remain a challenge in the Beijing-Tianjin-Hebei region of China: Insights from continuous high temporal resolution measurements in multiple cities

    Get PDF
    Carbonaceous aerosols in high emission areas attract worldwide attention of the scientific community and the public due to their adverse impacts on the environment, human health and climate. However, long-term continuous hourly measurements are scarce on the regional scale. In this study, a one-year hourly measurement (from December 1, 2016 to November 30, 2017) of organic carbon (OC) and elemental carbon (EC) in airborne fine particles was performed using semi-continuous OC/EC analyzers in Beijing, Tianjin, Shijiazhuang and Tangshan in the Beijing-Tianjin-Hebei (BTH) region in China, which is one of high emission areas in China, even in the world. Marked spatiotemporal variations were observed. The highest concentrations of OC (22.8 ± 30.6 μg/m 3 ) and EC (5.4 ± 6.5 μg/m 3 ) occurred in Shijiangzhuang while the lowest concentrations of OC (11.0 ± 10.7 μg/m 3 ) and EC (3.1 ± 3.6 μg/m 3 ) were obtained in Beijing and Tianjin, respectively. Pronounced monthly, seasonal and diurnal variations of OC and EC were recorded. Compared to published data from the past two decades for the BTH region, our OC and EC levels were lower, implying some effect of recent measures for improving the air quality. Significant correlations of OC versus EC (p < 0.001) were found throughout the study period with high slopes and correlation coefficients in winter, but low slopes and correlation coefficients in summer. The estimated secondary OC (SOC), based on the minimum R squared (MRS) method, represented 29%, 47%, 38% and 48% of the OC for Beijing, Tianjin, Shijiazhuang and Tangshan, respectively. These percentages are larger than previous ones obtained for the BTH region in the past decade. There were obvious differences in the potential source regions of OC and EC among the four cities. Obvious prominent potential source areas of OC and EC were observed for Beijing, which were mainly located in the central and western areas of Inner Mongolia and even extended to the Mongolian regions, which is different from the findings in previous studies. For all sites, adjacent areas of the main provinces in northern China were found to be important potential source areas. © 2019 The Author

    Causal effect of PM1 on morbidity of cause-specific respiratory diseases based on a negative control exposure

    Get PDF
    Background: Extensive studies have linked PM2.5 and PM10 with respiratory diseases (RD). However, few is known about causal association between PM1 and morbidity of RD. We aimed to assess the causal effects of PM1 on cause-specific RD. Methods: Hospital admission data were obtained for RD during 2014 and 2019 in Beijing, China. Negative control exposure and extreme gradient boosting with SHapley Additive exPlanation was used to explore the causality and contribution between PM1 and RD. Stratified analysis by gender, age, and season was conducted. Results: A total of 1,183,591 admissions for RD were recorded. Per interquartile range (28 μg/m3) uptick in concentration of PM1 corresponded to a 3.08% [95% confidence interval (CI): 1.66%–4.52%] increment in morbidity of total RD. And that was 4.47% (95% CI: 2.46%–6.52%) and 0.15% (95% CI: 1.44%-1.78%), for COPD and asthma, respectively. Significantly positive causal associations were observed for PM1 with total RD and COPD. Females and the elderly had higher effects on total RD, COPD, and asthma only in the warm months (Z = 3.03, P = 0.002; Z = 4.01, P \u3c 0.001; Z = 3.92, P \u3c 0.001; Z = 2.11, P = 0.035; Z = 2.44, P = 0.015). Contribution of PM1 ranked first, second and second for total RD, COPD, and asthma among air pollutants. Conclusion: PM1 was causally associated with increased morbidity of total RD and COPD, but not causally associated with asthma. Females and the elderly were more vulnerable to PM1-associated effects on RD

    Two-year continuous measurements of carbonaceous aerosols in urban Beijing, China: temporal variations, characteristics and source analyses

    Get PDF
    Organic carbon (OC) and elemental carbon (EC) in the PM2.5 of urban Beijing were measured hourly with a semi-continuous thermal-optical analyzer from Jan 1, 2013 to Dec 31, 2014. The annual average OC and EC concentrations in Beijing were 17.0 ± 12.4 and 3.4 ± 2.0 μg/m3 for 2013, and 16.8 ± 14.5 and 3.5 ± 2.9 μg/m3 for 2014. It is obvious that the annual average concentrations of OC and EC in 2014 were not less than those in 2013 while the annual average PM2.5 concentration (89.4 μg/m3) in 2014 was slightly reduced as compared to that (96.9 μg/m3) in 2013. Strong seasonality of the OC and EC concentrations were found with high values during the heating seasons and low values during the non-heating seasons. The diurnal cycles of OC and EC characterized by higher values at night and in the morning were caused by primary emissions, secondary transformation and stable meteorological condition. Due to increasing photochemical activity, the OC peaks were observed at approximately noon. No clear weekend effects were observed. Interestingly, in the early mornings on weekends in the autumn and winter, the OC and EC concentrations were close to or higher than those on weekdays. Our data also indicate that high OC and EC concentrations were closely associated with their potential source areas which were determined based on the potential source contribution function analysis. High potential source areas were identified and were mainly located in the south of Beijing and the plain of northern China. A much denser source region was recorded in the winter than in the other seasons, indicating that local and regional transport over regional scales are the most important. These results demonstrate that both regional transport from the southern regions and local accumulation could lead to the enhancements of OC and EC and likely contribute to the severe haze pollution in Beijing

    Highly time-resolved chemical characterization and implications of regional transport for submicron aerosols in the North China Plain

    Get PDF
    To investigate the regional transport and formation mechanisms of submicron aerosols in the North China Plan (NCP), for the first time, we conducted simultaneous combined observations of the non-refractory submicron aerosols (NR-PM1) chemical compositions using aerosol mass spectrometer at urban Beijing (BJ) and at regional background area of the NCP (XL), from November 2018 to January 2019. During the observation period, average mass concentrations of PM1 in BJ and XL were 26.6 +/- 31.7 and 16.0 +/- 18.7 mu g m(-3) respectively. The aerosol composition in XL showed a lower contribution of organic aerosol (33% vs. 43%) and higher fractions of nitrate (35% vs. 30%), ammonium (16% vs. 13%), and chlorine (2% vs. 1%) than in BJ. Additionally, a higher contribution of secondary organic aerosol (SOA) was also observed in XL, suggesting low primary emissions and highly oxidized OA in the background area. Nitrate displayed a significantly enhanced contribution with the aggravation of aerosol pollution in both BJ and XL, which was completely neutralized by excess ammonium at both sites, that the abundant ammonia emissions in the NCP favor nitrate formation on a regional scale. In addition, a higher proportion of nitrate in XL can be attributed to the more neutral and higher oxidation capacity of the background atmosphere. Heterogeneous aqueous reaction plays an important role in sulfate and SOA formation, and is more efficient in BJ which can be attributed to the higher aerosol surface areas at urban site. Regional transport from the southwestern regions of NCP showed a significant impact on the formation of haze episodes. Beside the invasion of transported pollutants, the abundant water vapor associated with the air mass to the downwind background area further enhanced local secondary transformation and expanded the regional scope of the haze pollution in the NCP. (C) 2019 Elsevier B.V. All rights reserved.Peer reviewe

    Rapid formation of intense haze episodes via aerosol-boundary layer feedback in Beijing

    Get PDF
    Although much effort has been put into studying air pollution, our knowledge of the mechanisms of frequently occurring intense haze episodes in China is still limited. In this study, using 3 years of measurements of air pollutants at three different height levels on a 325m Beijing meteorology tower, we found that a positive aerosol-boundary layer feedback mechanism existed at three vertical observation heights during intense haze polluted periods within the mixing layer. This feedback was characterized by a higher loading of PM2.5 with a shallower mixing layer. Modelling results indicated that the presence of PM2.5 within the boundary layer led to reduced surface temperature, relative humidity and mixing layer height during an intensive haze episode. Measurements showed that the aerosol-boundary layer feedback was related to the decrease in solar radiation, turbulent kinetic energy and thereby suppression of the mixing layer. The feedback mechanism can explain the rapid formation of intense haze episodes to some extent, and we suggest that the detailed feedback mechanism warrants further investigation from both model simulations and field observations.Peer reviewe

    The effect of Shengmai injection in patients with coronary heart disease in real world and its personalized medicine research using machine learning techniques

    Get PDF
    Objective: Shengmai injection is a common treatment for coronary heart disease. The accurate dose regimen is important to maximize effectiveness and minimize adverse reactions. We aim to explore the effect of Shengmai injection in patients with coronary heart disease based on real-world data and establish a personalized medicine model using machine learning and deep learning techniques.Methods: 211 patients were enrolled. The length of hospital stay was used to explore the effect of Shengmai injection in a case-control study. We applied propensity score matching to reduce bias and Wilcoxon rank sum test to compare results between the experimental group and the control group. Important variables influencing the dose regimen of Shengmai injection were screened by XGBoost. A personalized medicine model of Shengmai injection was established by XGBoost selected from nine algorithm models. SHapley Additive exPlanations and confusion matrix were used to interpret the results clinically.Results: Patients using Shengmai injection had shorter length of hospital stay than those not using Shengmai injection (median 10.00 days vs. 11.00 days, p = 0.006). The personalized medicine model established via XGBoost shows accuracy = 0.81 and AUC = 0.87 in test cohort and accuracy = 0.84 and AUC = 0.84 in external verification. The important variables influencing the dose regimen of Shengmai injection include lipid-lowering drugs, platelet-lowering drugs, levels of GGT, hemoglobin, prealbumin, and cholesterol at admission. Finally, the personalized model shows precision = 75%, recall rate = 83% and F1-score = 79% for predicting 40 mg of Shengmai injection; and precision = 86%, recall rate = 79% and F1-score = 83% for predicting 60 mg of Shengmai injection.Conclusion: This study provides evidence supporting the clinical effectiveness of Shengmai injection, and established its personalized medicine model, which may help clinicians make better decisions
    • …
    corecore