12 research outputs found
Enhancing Reconfigurable Platforms Programmability for Synchronous Data-Flow Applications
International audienceRecent FPGAs allow the design of efficient and complex Heterogeneous Systems-on-Chip (HSoC). Namely, these systems are composed of several processors, hardware accelerators as well as communication media between all these components. Performances provided by HSoCs make them really interesting for data-flow applications, especially image processing applications. The use of this kind of architecture provides good performances but the drawback is an increase of the programming complexity. This complexity is due to the heterogeneous deployment of the application on the platform. Some functions are implemented in software to run on a processor, whereas other functions are implemented in hardware to run in a reconfigurable partition of the FPGA. This article aims to define a programming model based on the Synchronous Data-Flow model, in order to abstract the heterogeneity of the implementation and to leverage the communication issue between software and hardware actors
The Phase-I Trigger Readout Electronics Upgrade of the ATLAS Liquid Argon Calorimeters
The Phase-I trigger readout electronics upgrade of the ATLAS Liquid Argon
calorimeters enhances the physics reach of the experiment during the upcoming
operation at increasing Large Hadron Collider luminosities. The new system,
installed during the second Large Hadron Collider Long Shutdown, increases the
trigger readout granularity by up to a factor of ten as well as its precision
and range. Consequently, the background rejection at trigger level is improved
through enhanced filtering algorithms utilizing the additional information for
topological discrimination of electromagnetic and hadronic shower shapes. This
paper presents the final designs of the new electronic elements, their custom
electronic devices, the procedures used to validate their proper functioning,
and the performance achieved during the commissioning of this system.Comment: 56 pages, 41 figures, 6 table
The ATLAS experiment at the CERN Large Hadron Collider: a description of the detector configuration for Run 3
The ATLAS detector is installed in its experimental cavern at Point 1 of the CERN Large Hadron Collider. During Run 2 of the LHC, a luminosity of â„’ = 2 Ă— 1034 cm-2 s-1 was routinely achieved at the start of fills, twice the design luminosity. For Run 3, accelerator improvements, notably luminosity levelling, allow sustained running at an instantaneous luminosity of â„’ = 2 Ă— 1034 cm-2 s-1, with an average of up to 60 interactions per bunch crossing. The ATLAS detector has been upgraded to recover Run 1 single-lepton trigger thresholds while operating comfortably under Run 3 sustained pileup conditions. A fourth pixel layer 3.3 cm from the beam axis was added before Run 2 to improve vertex reconstruction and b-tagging performance. New Liquid Argon Calorimeter digital trigger electronics, with corresponding upgrades to the Trigger and Data Acquisition system, take advantage of a factor of 10 finer granularity to improve triggering on electrons, photons, taus, and hadronic signatures through increased pileup rejection. The inner muon endcap wheels were replaced by New Small Wheels with Micromegas and small-strip Thin Gap Chamber detectors, providing both precision tracking and Level-1 Muon trigger functionality. Trigger coverage of the inner barrel muon layer near one endcap region was augmented with modules integrating new thin-gap resistive plate chambers and smaller-diameter drift-tube chambers. Tile Calorimeter scintillation counters were added to improve electron energy resolution and background rejection. Upgrades to Minimum Bias Trigger Scintillators and Forward Detectors improve luminosity monitoring and enable total proton-proton cross section, diffractive physics, and heavy ion measurements. These upgrades are all compatible with operation in the much harsher environment anticipated after the High-Luminosity upgrade of the LHC and are the first steps towards preparing ATLAS for the High-Luminosity upgrade of the LHC. This paper describes the Run 3 configuration of the ATLAS detector
The Phase-I Trigger Readout Electronics Upgrade of the ATLAS Liquid Argon Calorimeters
The Phase-I trigger readout electronics upgrade of the ATLAS Liquid Argon calorimeters enhances the physics reach of the experiment during the upcoming operation at increasing Large Hadron Collider luminosities. The new system, installed during the second Large Hadron Collider Long Shutdown, increases the trigger readout granularity by up to a factor of ten as well as its precision and range. Consequently, the background rejection at trigger level is improved through enhanced filtering algorithms utilizing the additional information for topological discrimination of electromagnetic and hadronic shower shapes. This paper presents the final designs of the new electronic elements, their custom electronic devices, the procedures used to validate their proper functioning, and the performance achieved during the commissioning of this system
The Phase-I trigger readout electronics upgrade of the ATLAS Liquid Argon calorimeters
International audienceThe Phase-I trigger readout electronics upgrade of the ATLAS Liquid Argon calorimeters enhances the physics reach of the experiment during the upcoming operation at increasing Large Hadron Collider luminosities. The new system, installed during the second Large Hadron Collider Long Shutdown, increases the trigger readout granularity by up to a factor of ten as well as its precision and range. Consequently, the background rejection at trigger level is improved through enhanced filtering algorithms utilizing the additional information for topological discrimination of electromagnetic and hadronic shower shapes. This paper presents the final designs of the new electronic elements, their custom electronic devices, the procedures used to validate their proper functioning, and the performance achieved during the commissioning of this system
The ATLAS experiment at the CERN Large Hadron Collider: a description of the detector configuration for Run 3
Abstract
The ATLAS detector is installed in its experimental cavern
at Point 1 of the CERN Large Hadron Collider. During Run 2 of the
LHC, a luminosity of
 ℒ = 2 × 1034 cm-2 s-1 was
routinely achieved at the start of fills, twice the design
luminosity. For Run 3, accelerator improvements, notably luminosity
levelling, allow sustained running at an instantaneous luminosity of
 ℒ = 2 × 1034 cm-2 s-1,
with an average of up to 60 interactions per bunch crossing. The
ATLAS detector has been upgraded to recover Run 1 single-lepton
trigger thresholds while operating comfortably under Run 3 sustained
pileup conditions. A fourth pixel layer 3.3 cm from the beam axis
was added before Run 2 to improve vertex reconstruction and
b-tagging performance. New Liquid Argon Calorimeter digital
trigger electronics, with corresponding upgrades to the Trigger and
Data Acquisition system, take advantage of a factor of 10 finer
granularity to improve triggering on electrons, photons, taus, and
hadronic signatures through increased pileup rejection. The inner
muon endcap wheels were replaced by New Small Wheels with Micromegas
and small-strip Thin Gap Chamber detectors, providing both precision
tracking and Level-1 Muon trigger functionality. Trigger coverage of
the inner barrel muon layer near one endcap region was augmented
with modules integrating new thin-gap resistive plate chambers and
smaller-diameter drift-tube chambers. Tile Calorimeter scintillation
counters were added to improve electron energy resolution and
background rejection. Upgrades to Minimum Bias Trigger Scintillators
and Forward Detectors improve luminosity monitoring and enable total
proton-proton cross section, diffractive physics, and heavy ion
measurements. These upgrades are all compatible with operation in
the much harsher environment anticipated after the High-Luminosity
upgrade of the LHC and are the first steps towards preparing ATLAS
for the High-Luminosity upgrade of the LHC. This paper describes
the Run 3 configuration of the ATLAS detector.</jats:p