290 research outputs found

    Fabricación de sistemas MEMS – un caso de estudio en la fabricación de un micro-espejo

    Get PDF
    This paper presents the working principle, design, and fabrication of a silicon-based scanning micromirror with a new type of action mechanism as an example of MEMS (Micro-Electro-Mechanical Systems). Micromirrors can be found in barcode readers as well as micro-projectors, optical coherence tomography, or spectrometers’ adjustable filters. The fabrication process of the device prompted us to describe and discuss the problems related to the manufacture of MEMS. The article starts with some terminology and a brief introduction to the field of microsystems. Afterwards, the concept of a new scanning micromirror is explained. The device is operated by two pairs of thermal bimorphs. A special design enables to maintain a constant distance from the center of the mirror to the light source during the scanning process. The device was implemented in a one degree-of-freedom micromirror and a two degree-of-freedom micromirror. The fabrication process of both types is described. For each case, a different type of substrate was used. The first type of substrate was a standard silicon wafer; the second one, SOI (Silicon-On-Insulator). The process with the first one was complicated and caused many problems. Replacing this substrate with SOI solved some of the issues, but did not prevent new ones from arising. Nevertheless, the SOI substrate produces much better results and it is preferable to manufacture this type of MEMS devices.Este trabajo muestra un mecanismo de acción, un diseño y una fabricación de un nuevo dispositivo de escaneo - un micro-espejo. Los micro-espejos se pueden encontrar en los lectores de códigos de barras, así como en los micro proyectores, en sistemas de tomografía óptica coherente, o en los filtros ajustables de espectrómetros. El proceso de formación del nuevo dispositivo nos llevó a describir y discutir los problemas relacionados con la fabricación de MEMS (sistemas microelectrónicos). En primer lugar, se da una terminología y una breve introducción al campo de los microsistemas. A continuación, se explica un concepto del nuevo micro-espejo de escanéo. El dispositivo es accionado por dos pares de actuadores termo-bimorfos. Un diseño especial permite mantener la distancia constante desde el centro del espejo a la fuente de luz durante el proceso de escaneo. El dispositivo se implementó en dos versiones: un micro-espejo con un grado de libertad y un micro-espejo con dos grados de libertad. Se describe un proceso de fabricación para los dos tipos del dispositivo que utiliza dos tipos diferentes de sustrato. El primer tipo de sustrato corresponde a una oblea de silicio estándar, el segundo substrato corresponde a un SOI (Silicon-On-Insulator). El proceso con la oblea de silicio estándar fue complicado y causó muchos problemas. Cambiar el sustrato a SOI ayudó a resolver algunos de ellos, pero no permitió evitar algunos nuevos. Sin embargo, el sustrato SOI da mejores resultados y se encuentra que es preferible fabricar dispositivos MEMS de este tipo

    A Coverage Criterion for Spaced Seeds and its Applications to Support Vector Machine String Kernels and k-Mer Distances

    Get PDF
    Spaced seeds have been recently shown to not only detect more alignments, but also to give a more accurate measure of phylogenetic distances (Boden et al., 2013, Horwege et al., 2014, Leimeister et al., 2014), and to provide a lower misclassification rate when used with Support Vector Machines (SVMs) (On-odera and Shibuya, 2013), We confirm by independent experiments these two results, and propose in this article to use a coverage criterion (Benson and Mak, 2008, Martin, 2013, Martin and No{\'e}, 2014), to measure the seed efficiency in both cases in order to design better seed patterns. We show first how this coverage criterion can be directly measured by a full automaton-based approach. We then illustrate how this criterion performs when compared with two other criteria frequently used, namely the single-hit and multiple-hit criteria, through correlation coefficients with the correct classification/the true distance. At the end, for alignment-free distances, we propose an extension by adopting the coverage criterion, show how it performs, and indicate how it can be efficiently computed.Comment: http://online.liebertpub.com/doi/abs/10.1089/cmb.2014.017

    On consensus biomarker selection

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Recent development of mass spectrometry technology enabled the analysis of complex peptide mixtures. A lot of effort is currently devoted to the identification of biomarkers in human body fluids like serum or plasma, based on which new diagnostic tests for different diseases could be constructed. Various biomarker selection procedures have been exploited in recent studies. It has been noted that they often lead to different biomarker lists and as a consequence, the patient classification may also vary.</p> <p>Results</p> <p>Here we propose a new approach to the biomarker selection problem: to apply several competing feature ranking procedures and compute a consensus list of features based on their outcomes. We validate our methods on two proteomic datasets for the diagnosis of ovarian and prostate cancer.</p> <p>Conclusion</p> <p>The proposed methodology can improve the classification results and at the same time provide a unified biomarker list for further biological examinations and interpretation.</p

    Batoid abundances, spatial distribution, and life history traits in the strait of sicily (Central mediterranean sea): Bridging a knowledge gap through three decades of survey

    Get PDF
    Batoid species play a key role in marine ecosystems but unfortunately they have globally declined over the last decades. Given the paucity of information, abundance data and the main life history traits for batoids, obtained through about three decades of bottom trawl surveys, are presented and discussed. The surveys were carried out in two areas of the Central Mediterranean (South of Sicily and Malta Island), in a timeframe ranging from 1990 to 2018. Excluding some batoids, the abundance trends were stable or increasing. Only R. clavata, R. miraletus, and D. oxyrinchus showed occurrence and abundance indexes notable enough to carry out more detailed analysis. In particular, spatial distribution analysis of these species highlighted the presence of two main hotspots in Sicilian waters whereas they seem more widespread in Malta. The lengths at first maturity (L50) were 695 and 860, 635 and 574, and 364 and 349 mm total length (TL), respectively, for females and males of D. oxyrinchus, R. clavata, and R. miraletus. The asymptotic lengths (L∞) and the curvature coefficients (K) were 1365 and 1240 (K = 0.11 and 0.26), 1260 and 1100 (K = 0.16 and 0.26), and 840 and 800 mm TL (K = 0.36 and 0.41), respectively, for females and males of D. oxyrinchus, R. clavata, and R. miraletus. The lack of detailed quantitative historical information on batoids of Sicily and Malta does not allow to analytically judge the current status of the stocks, although the higher abundance of some species within Malta raises some concern for the Sicilian counterpart. In conclusion, suitable actions to protect batoids in the investigated area are recommended

    The UK's skills system : training, employability and gaps in provision

    Get PDF
    Examines current trends and challenges for policymakers in the UK skills system. Explains that this review was commissioned as part of Foresight's future of skills and lifelong learning project (see further reports at B47282-3 and B47825). Outlines the changing demand for skills. Considers gaps in provision, skills shortages, the skills equilibrium and geographical gaps. Looks at access by individuals to skills and training. Considers the role of migration in addressing skills shortfalls. Looks at the role of careers information and guidance in addressing skills gaps

    The UK's skills system : training, employability and gaps in provision

    Get PDF
    Examines current trends and challenges for policymakers in the UK skills system. Explains that this review was commissioned as part of Foresight's future of skills and lifelong learning project (see further reports at B47282-3 and B47825). Outlines the changing demand for skills. Considers gaps in provision, skills shortages, the skills equilibrium and geographical gaps. Looks at access by individuals to skills and training. Considers the role of migration in addressing skills shortfalls. Looks at the role of careers information and guidance in addressing skills gaps

    Pre-anthesis ovary development determines genotypic differences in potential kernel weight in sorghum

    Get PDF
    Kernel weight is an important factor determining grain yield and nutritional quality in sorghum, yet the developmental processes underlying the genotypic differences in potential kernel weight remain unclear. The aim of this study was to determine the stage in development at which genetic effects on potential kernel weight were realized, and to investigate the developmental mechanisms by which potential kernel weight is controlled in sorghum. Kernel development was studied in two field experiments with five genotypes known to differ in kernel weight at maturity. Pre-fertilization floret and ovary development was examined and post-fertilization kernel-filling characteristics were analysed. Large kernels had a higher rate of kernel filling and contained more endosperm cells and starch granules than normal-sized kernels. Genotypic differences in kernel development appeared before stamen primordia initiation in the developing florets, with sessile spikelets of large-seeded genotypes having larger floret apical meristems than normal-seeded genotypes. At anthesis, the ovaries for large-sized kernels were larger in volume, with more cells per layer and more vascular bundles in the ovary wall. Across experiments and genotypes, there was a significant positive correlation between kernel dry weight at maturity and ovary volume at anthesis. Genotypic effects on meristem size, ovary volume, and kernel weight were all consistent with additive genetic control, suggesting that they were causally related. The pre-fertilization genetic control of kernel weight probably operated through the developing pericarp, which is derived from the ovary wall and potentially constrains kernel expansion

    Circulating linoleic acid at the time of myocardial infarction and risk of primary ventricular fibrillation

    Get PDF
    Primary ventricular fibrillation (PVF) is a major driver of cardiac arrest in the acute phase of ST-segment elevation myocardial infarction (STEMI). Enrichment of cardiomyocyte plasma membranes with dietary polyunsaturated fatty acids (PUFA) reduces vulnerability to PVF experimentally, but clinical data are scarce. PUFA status in serum phospholipids is a valid surrogate biomarker of PUFA status in cardiomyocytes within a wide range of dietary PUFA. In this nested case-control study (n = 58 cases of STEMI-driven PVF, n = 116 control non-PVF STEMI patients matched for age, sex, smoking status, dyslipidemia, diabetes mellitus and hypertension) we determined fatty acids in serum phospholipids by gas-chromatography, and assessed differences between cases and controls, applying the Benjamini-Hochberg procedure on nominal P-values to control the false discovery rate (FDR). Significant differences between cases and controls were restricted to linoleic acid (LA), with PVF patients showing a lower level (nominal P = 0.002; FDR-corrected P = 0.027). In a conditional logistic regression model, each one standard deviation increase in the proportion of LA was related to a 42% lower prevalence of PVF (odds ratio = 0.58; 95% confidence interval, 0.37, 0.90; P = 0.02). The association lasted after the inclusion of confounders. Thus, regular consumption of LA-rich foods (nuts, oils from seeds) may protect against ischemia-driven malignant arrhythmias
    corecore