1,036 research outputs found

    Geochemical modeling of magmatic gas scrubbing

    Get PDF
    The EQ3/6 software package, version 7.2 was successfully used to model scrubbing of magmatic gas by pure water at 0.1 MPa, in the liquid and liquid-plus-gas regions. Some post-calculations were necessary to account for gas separation effects. In these post-calculations, redox potential was considered to be fixed by precipitation of crystalline a-sulfur, a ubiquitous and precocious process. As geochemical modeling is constrained by conservation of enthalpy upon water-gas mixing, the enthalpies of the gas species of interest were reviewed, adopting as reference state the liquid phase at the triple point. Our results confirm that significant emissions of highly acidic gas species (SO2(g), HCl(g), and HF(g)) are prevented by scrubbing, until dry conditions are established, at least locally. Nevertheless important outgassing of HCl(g) can take place from acid, HCl-rich brines. Moreover, these findings support the rule of thumb which is generally used to distinguish SO2-, HCl-, and HF-bearing magmatic gases from SO2-, HCl-, and HF-free hydrothermal gases

    Ab initio study of canted magnetism of finite atomic chains at surfaces

    Full text link
    By using ab initio methods on different levels we study the magnetic ground state of (finite) atomic wires deposited on metallic surfaces. A phenomenological model based on symmetry arguments suggests that the magnetization of a ferromagnetic wire is aligned either normal to the wire and, generally, tilted with respect to the surface normal or parallel to the wire. From a first principles point of view, this simple model can be best related to the so--called magnetic force theorem calculations being often used to explore magnetic anisotropy energies of bulk and surface systems. The second theoretical approach we use to search for the canted magnetic ground state is first principles adiabatic spin dynamics extended to the case of fully relativistic electron scattering. First, for the case of two adjacent Fe atoms an a Cu(111) surface we demonstrate that the reduction of the surface symmetry can indeed lead to canted magnetism. The anisotropy constants and consequently the ground state magnetization direction are very sensitive to the position of the dimer with respect to the surface. We also performed calculations for a seven--atom Co chain placed along a step edge of a Pt(111) surface. As far as the ground state spin orientation is concerned we obtain excellent agreement with experiment. Moreover, the magnetic ground state turns out to be slightly noncollinear.Comment: 8 pages, 5 figures; presented on the International Conference on Nanospintronics Design and Realizations, Kyoto, Japan, May 2004; to appear in J. Phys.: Cond. Matte

    Element-resolved x-ray ferrimagnetic and ferromagnetic resonance spectroscopy

    Get PDF
    We report on the measurement of element-specific magnetic resonance spectra at gigahertz frequencies using x-ray magnetic circular dichroism (XMCD). We investigate the ferrimagnetic precession of Gd and Fe ions in Gd-substituted Yttrium Iron Garnet, showing that the resonant field and linewidth of Gd precisely coincide with Fe up to the nonlinear regime of parametric excitations. The opposite sign of the Gd x-ray magnetic resonance signal with respect to Fe is consistent with dynamic antiferromagnetic alignment of the two ionic species. Further, we investigate a bilayer metal film, Ni80_{80}Fe20_{20}(5 nm)/Ni(50 nm), where the coupled resonance modes of Ni and Ni80_{80}Fe20_{20} are separately resolved, revealing shifts in the resonance fields of individual layers but no mutual driving effects. Energy-dependent dynamic XMCD measurements are introduced, combining x-ray absorption and magnetic resonance spectroscopies.Comment: 16 pages, 8 figure

    Growth and magnetism of self-organized arrays of Fe(110) wires formed by deposition on kinetically grooved W(110)

    Full text link
    Homoepitaxy of W(110) and Mo(110) is performed in a kinetically-limited regime to yield a nanotemplate in the form of a uniaxial array of hills and grooves aligned along the [001] direction. The topography and organization of the grooves were studied with RHEED and STM. The nanofacets, of type {210}, are tilted 18° away from (110). The lateral period could be varied from 4 to 12nm by tuning the deposition temperature. Magnetic nanowires were formed in the grooves by deposition of Fe at 150°C on such templates. Fe/W wires display an easy axis along [001] and a mean blocking temperature Tb=100KComment: Proceedings of ECOSS 2006 (Paris

    Magnetic Reversal Time in Open Long Range Systems

    Full text link
    Topological phase space disconnection has been recently found to be a general phenomenon in isolated anisotropic spin systems. It sets a general framework to understand the emergence of ferromagnetism in finite magnetic systems starting from microscopic models without phenomenological on-site barriers. Here we study its relevance for finite systems with long range interacting potential in contact with a thermal bath. We show that, even in this case, the induced magnetic reversal time is exponentially large in the number of spins, thus determining {\it stable} (to any experimental observation time) ferromagnetic behavior. Moreover, the explicit temperature dependence of the magnetic reversal time obtained from the microcanonical results, is found to be in good agreement with numerical simulations. Also, a simple and suggestive expression, indicating the Topological Energy Threshold at which the disconnection occurs, as a real energy barrier for many body systems, is obtained analytically for low temperature

    Tunable magnetic properties of arrays of Fe(110) nanowires grown on kinetically-grooved W(110) self-organized templates

    Full text link
    We report a detailed magnetic study of a new type of self-organized nanowires disclosed briefly previously [B. Borca et al., Appl. Phys. Lett. 90, 142507 (2007)]. The templates, prepared on sapphire wafers in a kinetically-limited regime, consist of uniaxially-grooved W(110) surfaces, with a lateral period here tuned to 15nm. Fe deposition leads to the formation of (110) 7 nm-wide wires located at the bottom of the grooves. The effect of capping layers (Mo, Pd, Au, Al) and underlayers (Mo, W) on the magnetic anisotropy of the wires was studied. Significant discrepancies with figures known for thin flat films are evidenced and discussed in terms of step anisotropy and strain-dependent surface anisotropy. Demagnetizing coeffcients of cylinders with a triangular isosceles cross-section have also been calculated, to estimate the contribution of dipolar anisotropy. Finally, the dependence of magnetic anisotropy with the interface element was used to tune the blocking temperature of the wires, here from 50K to 200 K

    A single-cell analysis of breast cancer cell lines to study tumour heterogeneity and drug response

    Get PDF
    Cancer cells within a tumour have heterogeneous phenotypes and exhibit dynamic plasticity. How to evaluate such heterogeneity and its impact on outcome and drug response is still unclear. Here, we transcriptionally profile 35,276 individual cells from 32 breast cancer cell lines to yield a single cell atlas. We find high degree of heterogeneity in the expression of biomarkers. We then train a deconvolution algorithm on the atlas to determine cell line composition from bulk gene expression profiles of tumour biopsies, thus enabling cell line-based patient stratification. Finally, we link results from large-scale in vitro drug screening in cell lines to the single cell data to computationally predict drug responses starting from single-cell profiles. We find that transcriptional heterogeneity enables cells with differential drug sensitivity to co-exist in the same population. Our work provides a framework to determine tumour heterogeneity in terms of cell line composition and drug response

    A comparison of existing risk prediction models in patients undergoing venoarterial extracorporeal membrane oxygenation

    Get PDF
    © 2020 The Author(s) Background: Patients undergoing consideration for venoarterial extracorporeal membrane oxygenation (VA-ECMO) require an immediate risk profile assessment in the setting of incomplete information. A number of survival prediction models for critically ill patients and patients undergoing elective cardiac surgery or institution of VA-ECMO support have been designed. We assess the ability of these models to predict outcomes in a cohort of patients undergoing institution of VA-ECMO for cardiogenic shock or cardiac arrest. Methods: Fifty-one patients undergoing institution of VA-ECMO support were retrospectively analyzed. APACHE II, SOFA, SAPS II, Encourage, SAVE, and ACEF scores were calculated. Their ability to predict outcomes were assessed. Results: Indications for ECMO support included postcardiotomy shock (25%), ischemic etiologies (39%), and other etiologies (36%). Pre-ECMO arrest occurred in 73% and 41% of patients underwent cannulation during arrest. Survival to discharge was 39%. Three survival prediction model scores were significantly higher in nonsurvivors to discharge than surivors; the Encourage score (25.4 vs 20; p =.04), the APACHE II score (23.6 vs 19.2; p =.05), and the ACEF score (3.1 vs 1.8; p =.03). In ROC analysis, the ACEF score demonstrated the greatest predictive ability with an AUC of 0.7. Conclusions: A variety of survival prediction model scores designed for critically ill ICU and VA-ECMO patients demonstrated modest discriminatory ability in the current cohort of patients. The ACEF score, while not designed to predict survival in critically ill patients, demonstrated the best discriminatory ability. Furthermore, it is the simplest to calculate, an advantage in the emergent setting

    Surfactant effects in monodisperse magnetite nanoparticles of controlled size

    Full text link
    Monodisperse magnetite Fe3O4 nanoparticles of controlled size within 6 and 20 nm in diameter were synthesized by thermal decomposition of an iron organic precursor in an organic medium. Particles were coated with oleic acid. For all samples studied, saturation magnetization Ms reaches the expected value for bulk magnetite, in contrast to results in small particle systems for which Ms is usually much smaller due to surface spin disorder. The coercive field for the 6 nm particles is also similar to that of bulk magnetite. Both results suggest that the oleic acid molecules covalently bonded to the nanoparticle surface yield a strong reduction in the surface spin disorder. However, although the saturated state may be similar, the approach to saturation is different and, in particular, the high-field differential susceptibility is one order of magnitude larger than in bulk materials. The relevance of these results in biomedical applications is discussed.Comment: 3 pages, 3 figures. Presented at JEMS 2006 (San Sebastian, Spain). Submitted to JMM
    • …
    corecore