89 research outputs found
Clima Organizacional y Aprendizaje Significativo de los Oficiales Alumnos del Diplomado en Liderazgo y Gestión de la Compañía de Comunicaciones de la Escuela de Comunicaciones del Ejército - 2018
El objetivo de la presente investigación fue determinar si existe relación entre el clima organizacional con el aprendizaje significativo de los oficiales alumnos del diplomado en Liderazgo y Gestión de la Compañía de Comunicaciones en la Escuela de Comunicaciones del Ejército – 2018. El enfoque de la investigación fue cuantitativo, de tipo aplicada, nivel descriptivo, de diseño no experimental. La población estuvo compuesta por 14 oficiales alumnos y la muestra es de tipo censal, a quienes se les aplicó una encuesta de 15 preguntas con una escala de cinco categorías de respuestas referida a ambas variables. Este instrumento tuvo una fuerte confiabilidad de 0,897. Se realizó el análisis correspondiente a los resultados de la encuesta llegando a la demostración empírica de que un 88.5% apoya o considera positivamente los requerimientos de los indicadores y las dimensiones propuestas en el instrumento; esto fue ampliamente corroborado y contrastado empleando el chi cuadrado. Se concluyó que el clima organizacional se relaciona significativamente con el aprendizaje significativo de los oficiales alumnos del diplomado en Liderazgo y Gestión de la Compañía de Comunicaciones en la Escuela de Comunicaciones del Ejército – 2018.Trabajo de investigació
La profesionalización y su relación con el desempeño en las empresas familiares: Caso de estudio de un grupo de empresas del sector textil
La presente investigación busca comprender la relación entre las dimensiones relevantes
de la profesionalización y el desempeño de la empresa familiar en un grupo de empresas del sector
textil.
Se escogió el estudio de empresas familiares por poseer características diferentes a las no
familiares y por tener una notoria importancia en la economía de nuestro país, ya que generan el
75 % del PBI del país (Dyer, 2013). Por otro lado, diversos autores mencionan que la
profesionalización es un elemento clave en el éxito de la empresa familiar, por ello es importante
conocer cuál sería su relación con el desempeño de la empresa. Así también, la profesionalización
es un proceso que resulta estratégico de ser desarrollado, debido a que posibilita mayores
oportunidades en el mercado.
La presente investigación tiene un alcance exploratorio descriptivo, con un enfoque
cualitativo, basado en un estudio de casos múltiple, que tiene como objetivo determinar las
dimensiones de la profesionalización en el desempeño de la empresa familiar. Se hizo uso de
entrevistas semi-estructuradas a los fundadores y administrativos de un grupo de empresas
familiares, así también a especialistas en el tema de la profesionalización, de manera que se
contrastó la teoría con la opinión de expertos y los casos de estudio. Asimismo, esta investigación
tiene como fin que sirva como referencia, para posteriores investigaciones a niveles de teorización
más profundos.
De acuerdo con la teoría, existe una relación entre la profesionalización y el desempeño
de una empresa familiar, si bien esta es financiera, no existe suficiente información sobre su
relación con el desempeño no financiero. Sin embargo, a partir de los resultados de esta
investigación se encontró que existen dimensiones de la profesionalización que también guardan
relación con el desempeño no financiero, definido como la teoría de la riqueza socioemocional.
Finalmente, se muestra las conclusiones y recomendaciones de la investigación.Tesi
Análisis del programa de acompañamiento en el sistema de becas: Caso “Beca Vocación Maestro” en la Facultad de Educación de la Pontificia Universidad Católica del Perú (PUCP)
La presente investigación tiene como objetivo principal identificar las variables más
importantes que permitan fortalecer el programa de acompañamiento a los estudiantes de la Beca
Vocación Maestro (BVM) de la Facultad de Educación de la Pontificia Universidad Católica del
Perú (PUCP). Inicialmente, se revisó la literatura para analizar modelos de gestión reportados
para programas de acompañamiento en diferentes tipos de becas, y poder considerarlas en el
estudio de la BVM y su programa de acompañamiento en la Facultad de Educación de la PUCP.
La investigación se trabajó como un estudio de caso que busca caracterizar la trayectoria
del becario en la PUCP, con el apoyo del programa de acompañamiento, y percibir su grado de
satisfacción tanto de la beca recibida como de la participación de otros actores involucrados.
Asimismo, se analizaron los aspectos claves del actual programa de acompañamiento de la PUCP
y su relación con el modelo de acompañamiento teórico propuesto por Rodríguez (2004).
Las intervenciones del programa de acompañamiento fueron identificados a través de la
construcción del “ciclo de experiencia del usuario” para diferentes grupos de becarios, con el
objetivo de identificar las actividades de los becarios desde que obtienen la beca hasta su inserción
laboral. En este proceso empleamos herramientas cuantitativas y cualitativas para recopilar
información.
Finalmente, mediante encuestas, entrevistas y focus group a autoridades y becarios se
determinaron y analizaron las variables del ciclo de experiencia del usuario para identificar las
necesidades no satisfechas de los becarios y proponer alternativas para fortalecer el programa de
acompañamiento
The SOAR Optical Imager
The SOAR Optical Imager (SOI) is the commissioning instrument for the 4.2-m SOAR telescope, which is sited on Cerro Pachón, and due for first light in April 2003. It is being built at Cerro Tololo Inter-American Observatory, and is one of a suite of first-light instruments being provided by the four SOAR partners (NOAO, Brazil, University of North Carolina, Michigan State University). The instrument is designed to produce precision photometry and to fully exploit the expected superb image quality of the SOAR telescope, over a 6x6 arcmin field. Design goals include maintaining high throughput down to the atmospheric cut-off, and close reproduction of photometric passbands throughout 310-1050nm. The focal plane consists of a two-CCD mosaic of 2Kx4K Lincoln Labs CCDs, following an atmospheric dispersion corrector, focal reducer, and tip-tilt sensor. Control and data handling are within the LabVIEW-Linux environment used throughout the SOAR Project
ISPI: the infared side port imager for the CITO 4-m telescope
The new operations model for the CTIO Blanco 4-m telescope will use a small suite of fixed facility instruments for imaging and spectroscopy. The Infrared Side Port Imager, ISPI, provides the infrared imaging capability. We describe the optical, mechanical, electronic, and software components of the instrument. The optical design is a refractive camera-collimator system. The cryo-mechanical packaging integrates two LN2-cooled dewars into a compact, straightline unit to fit within space constraints at the bent Cassegrain telescope focus. A HAWAII 2 2048 x 2048 HgCdTe array is operated by an SDSU II array controller. Instrument control is implemented with ArcVIEW, a proprietary LabVIEW-based software package. First light on the telescope is planned for September 2002
Silk-reinforced collagen hydrogels with raised multiscale stiffness for mesenchymal cells 3D culture
Type I collagen hydrogels are of high interest in tissue engineering. With the evolution of 3D bioprinting technologies, a high number of collagen-based scaffolds have been reported for the development of 3D cell cultures. A recent proposal was to mix collagen with silk fibroin derived from Bombyx mori silkworm. Nevertheless, due to the difficulties in the preparation and the characteristics of the protein, several problems such as phase separation and collagen denaturation appear during the procedure. Therefore, the common solution is to diminish the concentration of collagen although in that way the most biologically relevant component is reduced. In this study, we present a new, simple, and effective method to develop a collagen-silk hybrid hydrogel with high collagen concentration and with increased stiffness approaching that of natural tissues, which could be of high interest for the development of cardiac patches for myocardial regeneration and for preconditioning of mesenchymal stem cells (MSCs) to improve their therapeutic potential. Sericin in the silk was preserved by using a physical solubilizing procedure that results in a preserved fibrous structure of type I collagen, as shown by ultrastructural imaging. The macro- and micromechanical properties of the hybrid hydrogels measured by tensile stretch and atomic force microscopy, respectively, showed a more than twofold stiffening than the collagen-only hydrogels. Rheological measurements showed improved printability properties for the developed biomaterial. The suitability of the hydrogels for 3D cell culture was assessed by 3D bioprinting bone marrow-derived MSCs cultured within the scaffolds. The result was a biomaterial with improved printability characteristics that better resembled the mechanical properties of natural soft tissues while preserving biocompatibility owing to the high concentration of collagen. Impact statement In this study, we report the development of silk microfiber-reinforced type I collagen hydrogels for 3D bioprinting and cell culture. In contrast with previously reported studies, a novel physical method allowed the preservation of the silk sericin protein. Hydrogels were stable, showed no phase separation between the biomaterials, and they presented improved printability. An increase between two- and threefold of the multiscale stiffness of the scaffolds was achieved with no need of using additional crosslinkers or complex methods, which could be of high relevance for cardiac patches development and for preconditioning mesenchymal stem cells (MSCs) for therapeutic applications. We demonstrate that bone marrow-derived MSCs can be effectively bioprinted and 3D cultured within the stiffened structures.This work was supported in part by the Spanish Ministry
of Sciences, Innovation and Universities (DPI2017-83721-P
and PGC2018-097323-A-I00) and by the Marie Sklodowska-
Curie Action, Innovative Training Networks 2018, EU Grant
Agreement no. 812772.Peer ReviewedPostprint (published version
Gemini multi-conjugate adaptive optics system review II: Commissioning, operation and overall performance
The Gemini Multi-conjugate Adaptive Optics System - GeMS, a facility
instrument mounted on the Gemini South telescope, delivers a uniform, near
diffraction limited images at near infrared wavelengths (0.95 microns- 2.5
microns) over a field of view of 120 arc seconds. GeMS is the first sodium
layer based multi laser guide star adaptive optics system used in astronomy. It
uses five laser guide stars distributed on a 60 arc seconds square
constellation to measure for atmospheric distortions and two deformable mirrors
to compensate for it. In this paper, the second devoted to describe the GeMS
project, we present the commissioning, overall performance and operational
scheme of GeMS. Performance of each sub-system is derived from the
commissioning results. The typical image quality, expressed in full with half
maximum, Strehl ratios and variations over the field delivered by the system
are then described. A discussion of the main contributor to performance
limitation is carried-out. Finally, overheads and future system upgrades are
described.Comment: 20 pages, 11 figures, accepted for publication in MNRA
The SOAR Optical Imager
The SOAR Optical Imager (SOI) is the commissioning instrument for the 4.2-m SOAR telescope, which is sited on Cerro Pachón, and due for first light in April 2003. It is being built at Cerro Tololo Inter-American Observatory, and is one of a suite of first-light instruments being provided by the four SOAR partners (NOAO, Brazil, University of North Carolina, Michigan State University). The instrument is designed to produce precision photometry and to fully exploit the expected superb image quality of the SOAR telescope, over a 6x6 arcmin field. Design goals include maintaining high throughput down to the atmospheric cut-off, and close reproduction of photometric passbands throughout 310-1050nm. The focal plane consists of a two-CCD mosaic of 2Kx4K Lincoln Labs CCDs, following an atmospheric dispersion corrector, focal reducer, and tip-tilt sensor. Control and data handling are within the LabVIEW-Linux environment used throughout the SOAR Project
ISPI: the infared side port imager for the CITO 4-m telescope
The new operations model for the CTIO Blanco 4-m telescope will use a small suite of fixed facility instruments for imaging and spectroscopy. The Infrared Side Port Imager, ISPI, provides the infrared imaging capability. We describe the optical, mechanical, electronic, and software components of the instrument. The optical design is a refractive camera-collimator system. The cryo-mechanical packaging integrates two LN2-cooled dewars into a compact, straightline unit to fit within space constraints at the bent Cassegrain telescope focus. A HAWAII 2 2048 x 2048 HgCdTe array is operated by an SDSU II array controller. Instrument control is implemented with ArcVIEW, a proprietary LabVIEW-based software package. First light on the telescope is planned for September 2002
- …