Nonuniqueness in a minimal model for cell motility

Two–phase flow models have been used previously to model cell motility, however these have rapidly become very complicated, including many physical processes, and are opaque. Here we demonstrate that even the simplest one–dimensional, two–phase, poroviscous, reactive flow model displays a number of behaviours relevant to cell crawling. We present stability analyses that show that an asymmetric perturbation is required to cause a spatially uniform, stationary strip of cytoplasm to move, which is relevant to cell polarization. Our numerical simulations identify qualitatively distinct families of travelling–wave solution that co–exist at certain parameter values. Within each family, the crawling speed of the strip has a bell–shaped dependence on the adhesion strength. The model captures the experimentally observed behaviour that cells crawl quickest at intermediate adhesion strengths, when the substrate is neither too sticky nor too slippy

Cooperating Agents for 3D Scientific Data Interpretation

Many organizations collect vast quantities of three-dimensional (3-D) scientific data in volumetric form for a range of purposes, including resource exploration, market forecasting, and process modelling. Traditionally, these data have been interpreted by human experts with only minimal software assistance. However, such manual interpretation is a painstakingly slow and tedious process. Moreover, since interpretation involves subjective judgements and each interpreter has different scientific knowledge and experience, formulation of an effective interpretation often requires the cooperation of numerous such experts. Hence, there is a pressing need for a software system in which individual interpretations can be generated automatically and then refined through the use of cooperative reasoning and information sharing. To this end, a prototype system, SurfaceMapper, has been developed in which a community of cooperating software agents automatically locate and display interpretations in a volume of 3-D scientific data. The challenges and experiences in designing and building such a system are discussed. Particular emphasis is given to the agents' interactions and an empirical evaluation of the effectiveness of different cooperation strategies is presented

Strongly Non-Equilibrium Bose-Einstein Condensation in a Trapped Gas

We present a qualitative (and quantitative, at the level of estimates) analysis of the ordering kinetics in a strongly non-equilibrium state of a weakly interacting Bose gas, trapped with an external potential. At certain conditions, the ordering process is predicted to be even more rich than in the homogeneous case. Like in the homogeneous case, the most characteristic feature of the full-scale non-equilibrium process is the formation of superfluid turbulence.Comment: 4 pages, revtex, no figures. Submitted to PR

Ion-Energy Plume Diagnostics on the BHT-600 Hall Thruster Cluster

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/76547/1/AIAA-20514-735.pd

Test Capability Enhancements to the NASA Langley 8-Foot High Temperature Tunnel

The NASA Langley 8-Foot High Temperature Tunnel produces true enthalpy environments simulating flight from Mach 4 to Mach 7, primarily for airbreathing propulsion and aerothermal/thermo-structural testing. Flow conditions are achieved through a methane-air heater and nozzles producing aerodynamic Mach numbers of 4, 5 or 7 and have exit diameters of 8 feet or 4.5 feet. The 12-ft long free-jet test section, housed inside a 26-ft vacuum sphere, accommodates large test articles. Recently, the facility underwent significant upgrades to support hydrocarbon fueled scramjet engine testing and to expand flight simulation capability. The upgrades were required to meet engine system development and flight clearance verification requirements originally defined by the joint NASA-Air Force X-43C Hypersonic Flight Demonstrator Project and now the Air Force X-51A Program. Enhancements to the 8-Ft. HTT were made in four areas: 1) hydrocarbon fuel delivery; 2) flight simulation capability; 3) controls and communication; and 4) data acquisition/processing. The upgrades include the addition of systems to supply ethylene and liquid JP-7 to test articles; a Mach 5 nozzle with dynamic pressure simulation capability up to 3200 psf, the addition of a real-time model angle-of-attack system; a new programmable logic controller sub-system to improve process controls and communication with model controls; the addition of MIL-STD-1553B and high speed data acquisition systems and a classified data processing environment. These additions represent a significant increase to the already unique test capability and flexibility of the facility, and complement the existing array of test support hardware such as a model injection system, radiant heaters, six-component force measurement system, and optical flow field visualization hardware. The new systems support complex test programs that require sophisticated test sequences and precise management of process fluids. Furthermore, the new systems, such as the real-time angle of attack system and the new programmable logic controller enhance the test efficiency of the facility. The motivation for the upgrades and the expanded capabilities is described here

The Antiferromagnetic Band Structure of La2CuO4 Revisited

Using the Becke-3-LYP functional, we have performed band structure calculations on the high temperature superconductor parent compound, La2CuO4. Under the restricted spin formalism (rho(alpha) equal to rho(beta)), the R-B3LYP band structure agrees well with the standard LDA band structure. It is metallic with a single Cu x2-y2/O p(sigma) band crossing the Fermi level. Under the unrestricted spin formalism (rho(alpha) not equal to rho(beta)), the UB3LYP band structure has a spin polarized antiferromagnetic solution with a band gap of 2.0 eV, agreeing well with experiment. This state is 1.0 eV (per formula unit) lower than that calculated from the R-B3LYP. The apparent high energy of the spin restricted state is attributed to an overestimate of on-site Coulomb repulsion which is corrected in the unrestricted spin calculations. The stabilization of the total energy with spin polarization arises primarily from the stabilization of the x2-y2 band, such that the character of the eigenstates at the top of the valence band in the antiferromagnetic state becomes a strong mixture of Cu x2-y2/O p(sigma) and Cu z2/O' p(z). Since the Hohenberg-Kohn theorem requires the spin restricted and spin unrestricted calculations give exactly the same ground state energy and total density for the exact functionals, this large disparity in energy reflects the inadequacy of current functionals for describing the cuprates. This calls into question the use of band structures based on current restricted spin density functionals (including LDA) as a basis for single band theories of superconductivity in these materials.Comment: 13 pages, 8 figures, to appear in Phys. Rev. B, for more information see http://www.firstprinciples.co

Magnetically filtered Faraday probe for measuring the ion current density profile of a Hall thruster

The ability of a magnetically filtered Faraday probe (MFFP) to obtain the ion current density profile of a Hall thruster is investigated. The MFFP is designed to eliminate the collection of low-energy, charge-exchange (CEX) ions by using a variable magnetic field as an ion filter. In this study, a MFFP, Faraday probe with a reduced acceptance angle (BFP), and nude Faraday probe are used to measure the ion current density profile of a 5 kW5kW Hall thruster operating over the range of 300–500 V300–500V and 5–10 mg/s5–10mg∕s. The probes are evaluated on a xenon propellant Hall thruster in the University of Michigan Large Vacuum Test Facility at operating pressures within the range of 4.4×10−4 Pa4.4×10−4Pa Xe (3.3×10−6 Torr3.3×10−6Torr Xe) to 1.1×10−3 Pa1.1×10−3Pa Xe (8.4×10−6 Torr8.4×10−6Torr Xe) in order to study the ability of the Faraday probe designs to filter out CEX ions. Detailed examination of the results shows that the nude probe measures a greater ion current density profile than both the MFFP and BFP over the range of angular positions investigated for each operating condition. The differences between the current density profiles obtained by each probe are attributed to the ion filtering systems employed. Analysis of the results shows that the MFFP, operating at a +5 A+5A solenoid current, provides the best agreement with flight-test data and across operating pressures.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/87898/2/013503_1.pd

Comparing placentas from normal and abnormal pregnancies

This report describes work carried out at a Mathematics-in-Medicine Study Group. It is believed that placenta shape villous network characteristics are strongly linked to the placenta’s efficiency, and hence to pregnancy outcome. We were asked to consider mathematical ways to describe the shape and other characteristics of a placenta, as well as forming mathematical models for placenta development. In this report we propose a number of possible measure of placental shape, form, and efficiency, which can be computed from images already obtained. We also consider various models for the early development of placentas and the growth of the villous tree

Effectiveness of the Volunteer Family Connect Program in reducing isolation of vulnerable families and supporting their parenting: randomized controlled trial with intention-to-treat analysis of primary outcome variables

Background: Volunteer home visiting is a widely adopted community-based approach to support families by linking isolated or vulnerable families with community volunteers who visit their homes weekly over approximately 12 months. This study seeks to robustly evaluate the effectiveness of this model of support for families with young children. Objective: This paper reports the intention-to-treat analysis of primary and secondary outcomes for a pragmatic randomized controlled trial (RCT) of the Volunteer Family Connect intervention, a volunteer home-visiting program designed to support families with young children who experience social isolation or a lack of parenting confidence and skills. Methods: The RCT was conducted across seven sites in Australia. Overall, 341 families were recruited: 169 intervention (services as usual+volunteer home visits) and 172 control (services as usual) families. Intervention families received the program for 3-12 months. Participants were invited to complete six data collection points over a 15-month period. Primary outcomes were community connectedness and parenting competence. Secondary outcomes included parent physical and mental health, general parent wellbeing, parent empowerment, the sustainability of family routines, and the parent-child relationship. According to the protocol, the program would be judged to be effective if at least one of the primary outcomes was significantly positive and the other was neutral (ie, intervention families did not demonstrate positive or negative outcomes compared to the control group). Results: The intervention group demonstrated significant improvement in the primary outcome variable parenting sense of competence as compared to the control group. Overall, there was no significant difference between the intervention and control groups with regard to the primary outcome variable community connectedness, other than on the “Guidance” subscale of the Social Provisions Scale. Because there were statistically significant findings for the total score of one primary outcome variable “parenting sense of competence” and largely neutral findings for the primary outcome variable “community connectedness,” the program met the previously defined criteria for program effectiveness. In relation to secondary outcomes, intervention families reported significantly higher wellbeing and were significantly more likely to feel that life was improving. Conclusions: The Volunteer Family Connect intervention was considered an effective intervention, with a role to play on the landscape of services available to support vulnerable families with young children

SMA/PdBI multiple line observations of the nearby Seyfert2 galaxy NGC 1068: Shock related gas kinematics and heating in the central 100pc?

We present high angular resolution (0.5-2.0") observations of the mm continuum and the 12CO(J=3-2), 13CO(J=3-2), 13CO(J=2-1), C18O(J=2-1), HCN(J=3-2), HCO+(J=4-3) and HCO+(J=3-2) line emission in the circumnuclear disk (r=100pc) of the proto-typical Seyfert type-2 galaxy NGC1068, carried out with the Submillimeter Array. We further include in our analysis new 13CO(J=1-0) and improved 12CO(J=2-1) observations of NGC1068 at high angular resolution (1.0-2.0") and sensitivity, conducted with the IRAM Plateau de Bure Interferometer. Based on the complex dynamics of the molecular gas emission indicating non-circular motions in the central ~100pc, we propose a scenario in which part of the molecular gas in the circumnuclear disk of NGC1068 is radially blown outwards as a result of shocks. This shock scenario is further supported by quite warm (Tkin>=200K) and dense (nH2=10^4cm^-3) gas constrained from the observed molecular line ratios. The HCN abundance in the circumnuclear disk is found to be [HCN]/[12CO]=10^-3.5. This is slightly higher than the abundances derived for galactic and extragalactic starforming/starbursting regions. This results lends further support to X-ray enhanced HCN formation in the circumnuclear disk of NGC1068, as suggested by earlier studies. The HCO+ abundance ([HCO+]/[12CO]=10^-5) appears to be somewhat lower than that of galactic and extragalactic starforming/starbursting regions. When trying to fit the cm to mm continuum emission by different thermal and non-thermal processes, it appears that electron-scattered synchrotron emission yields the best results while thermal free-free emission seems to over-predict the mm continuum emission.Comment: accepted for publication by ApJ; 35pages, 22 figures and 6 tables (at the end of the file); 3 figures have been decreased in quality to match size limi