270 research outputs found

    Quality control test for unreliable meteorological and electrical photovoltaic measurements

    Get PDF
    Meteorological and electrical measurements using predictive computational techniques have been used in the analysis of photovoltaic system operation and maintenance. International standards establish general and no standardized criteria on the quality control and validation of these measurements. In the present work, a methodology has been developed to correct erroneous photovoltaic experimental measurements: radiation, temperature, current, and voltage. We validated the proposed approach with 12 case studies with more than 5,000 meteorological and electric measurements from an experimental 3 kWp photovoltaic system. The approach is based on a set of non-intrusive criteria developed from the one diode model, the approach allowed to correct about 80% of the erroneous data, 30% more using polynomial regression. As for the regression methodology, we have shown that the proposed methodology includes 4 meteorologicalelectrical variables allowing a more rigorous analysis. For 75% of the cases evaluated, the proposed methodology achieves a better data correction

    Data quality processing for photovoltaic system measurements

    Get PDF
    The operation and maintenance activities in photovoltaic systems use meteorological and electrical measurements that must be reliable to check system performance. The International Electrotechnical Commission (IEC) standards have established general criteria to filter erroneous information; however, there is no standardized process for the evaluation of measurements. In the present work we developed 3 procedures to detect and correct measurements of a photovoltaic system based on the single diode model. The performance evaluation of each criterion was tested with 6 groups of experimental measurements from a 3 kWp installation. Based on the error of the 3 procedures performed, the most unfavorable case has been prioritized. Then, the reduction of errors between the estimated and measured value has been achieved, reducing the number of measurements to be corrected. For the clear sky categories, the coefficient of determination is 0.9975 and 0.9961 for the high irradiance profile. Although an increase of 2.5% for coefficient of determination has been achieved, the overcast sky categories should be analyzed in more detail. Finally, the different causes of measurement error should be analyzed, associated with calibration errors and sensor quality

    Identificación de posibles dianas terapéuticas en la enfermedad de la diabetes mellitus tipo 2 (T2DM) en base a estudios bioinformáticos

    Get PDF
    Type 2 diabetes mellitus is a chronic disease characterized by insulin resistance and dysfunction of the beta cells of the pancreas, resulting in elevated blood glucose levels. Elevated blood glucose levels can lead to disorders of the circulatory, nervous, and immune systems. The aim of this study was to identify potential therapeutic targets by applying bioinformatics techniques and biological databases to study genes that show association and therapeutic potential to treat the disease. Computer-aided drug design methodology was used, molecular docking and virtual screening techniques were applied to identify binding sites with desirable drugability characteristics where chemical compounds and commercial ligands were docked. The docking energy in the different protein-ligand complexes was evaluated, and those with the highest stability were chosen. Virtual screening showed several chemical compounds and commercial drugs whose affinity energy ranged from -9.3 to -9.8 kcal/mol. The protein IRS-1 was identified as a therapeutic target, it presented a protein receptor identified in the Protein Data Bank database with 1QQG with a drugability of 0.84, the compounds Zosuquidar, Rimacalib, Uk432097, Mosapramine, Devazepide and Setipiprant were tested, an average affinity energy of -7. 5 kcal/mol establishing them as possible ligands for the therapeutic target, the toxicity analysis confirmed the application of these compounds and drugs as a possible treatment for the disease.La diabetes mellitus tipo 2 es una enfermedad crónica caracterizada por la resistencia a la insulina y la disfunción de las células beta del páncreas, lo que resulta en niveles elevados de glucosa en sangre. Los niveles elevados de glucosa en la sangre pueden derivar en trastornos de los sistemas circulatorio, nervioso e inmunitario. El objetivo de este estudio fue identificar posibles dianas terapéuticas mediante la aplicación de técnicas bioinformáticas y bases de datos biológicas para estudiar los genes que presentan asociación y potencial terapéutico para tratar la enfermedad. Se utilizó la metodología de diseño de fármacos asistido por computador, se aplicaron técnicas de acoplamiento molecular y cribado virtual para identificar sitios de unión con características deseables de drugabilidad en los que se acoplaron compuestos químicos y ligandos comerciales. Se evaluó la energía de acoplamiento en los diferentes complejos proteína-ligando, se escogió los que presentaron mayor estabilidad. El cribado virtual mostró varios compuestos químicos y medicamentos comerciales cuya energía de afinidad oscilaba entre -9.3 y -9.8 kcal/mol. Se identificó la proteína IRS-1 como diana terapéutica, esta presentó un receptor proteico identificado en la base de datos Protein Data Bank con 1QQG con una drugabilidad de 0.84, se probaron los compuestos Zosuquidar, Rimacalib, Uk432097, Mosapramine, Devazepide y Setipiprant, se obtuvo una energía media de afinidad de -7.5 kcal/mol estableciéndose como posibles ligandos para la diana terapéutica, el análisis de toxicidad confirmó la aplicación de estos compuestos y medicamentos como un posible tratamiento para la enfermedad

    Modelo de estrategia de fidelización para la compañía CNT en el servicio de telefonía celular en la ciudad de Quito.

    Get PDF
    The National Telecommunications Corporation CNT EP is a public Telco Ecuador, was created on January 14, 2010, it provides services local - regional and international telephony services, to access internet, satellite television and mobile telephony mobile in Ecuadorian territory. CNT was incorporated as a limited company by public deed of merger of extinct Andinatel SA and Pacifictel SA, signed on October 30, 2008, with the aim of unifying services and expand coverage in fixed telephony and broadband internet in all Ecuador In latest years, CNT has had different difficulty retaining customer loyalty in mobile telephony, which is why we have made the investigation that customers are not satisfied with the service. That `s way it has developed a marketing plan, with several activities which will result in the customer loyalty while attracting new ones In the searching of recommended several activities, the same that will be based and supported on surveys of customers and all activities, and they together allow to the customer to feel satisfied about CNT services.La Corporación Nacional de Telecomunicaciones CNT EP del Ecuador, creada el 14 de Enero del 2010, brinda servicios de telefonía fija local, regional e internacional, con acceso a internet estándar y de alta velocidad, televisión satelital y telefonía celular en el territorio nacional. CNT se constituyó como sociedad anónima, mediante escritura pública de fusión de las extintas Andinatel S. A. y Pacifictel S. A., suscrita el 30 de octubre de 2008, con el objetivo de unificar los servicios y ampliar la cobertura en telefonía fija e Internet banda ancha en todo el Ecuador. En los últimos años, CNT ha tenido diferentes dificultades para fidelizar a sus clientes en la telefonía celular, es por ello que con la investigación realizada, se determinó que los clientes no están satisfechos en algunas áreas del servicio. Por lo que se ha desarrollado un plan de marketing, con diferentes actividades de las cuales se va a tener como resultado la fidelización del cliente y al mismo tiempo atraer nuevos

    El seguimiento en la Moral. Max Scheler y Fritz Tillmann

    Get PDF
    Esta tesis se centra en la figura de Fritz Tillmann, que, en la primera mitad del siglo XX, insistió en la idea de que el centro de la moral radica en el seguimiento de Cristo. Para cumplir este propósito, recogió la categoría filosófica de «seguimiento» que había sido elaborada por Max Scheler. Inspirándose en la axiología de Scheler, Tillman conectó con la rica tradición teológica y mística contenida en la reflexión sobre la «imitación de Cristo». Con esta categoría dinámica, Tillmann quiere renovar la moral católica, hacerla más atractiva y evitar la casuística. Seguir a Cristo es, en primer lugar, un seguimiento interior, algo que sólo es posible con la gracia. Por lo tanto, seguir a Cristo nos conduce inexorablemente a la mística. De este modo se aparta una falsa concepción de la moralidad que se había centrado demasiado en las obligaciones, en la determinación de qué era pecado y qué tipo de pecado. La propuesta de Tillmann no se limita a una moral de mínimos, sino que su objetivo general consiste en la llamada a la santidad. El manual de Tillmann sembró la semilla que más tarde creció y alimentó la reflexión teológica en el siglo XX. Este camino desemboca en la encíclica Veritatis Splendor de S. Juan Pablo II, donde el Magisterio de la Iglesia afirma explícitamente que seguir a Cristo es el fundamento esencial y original de la moral cristiana. Con la aportación de la categoría de «seguimiento de Cristo», Tillmann se presenta como uno de los más importantes innovadores de la moral católica en el siglo XX.This thesis focuses on the figure of Fritz Tillmann, who, in the first half of the 20th century, insisted on the idea that the center of morality consists in the following of Christ. To develop this idea, he appropriated the philosophical category of «following», previously elaborated by Max Scheler. Inspired by Scheler’s axiology, Tillman connected with the rich theological and mystical tradition contained in the reflection on the «imitation of Christ». With this dynamic category, Tillmann attempted to renew Catholic morality, making it more attractive and avoiding casuistry. Following Christ involves, in the first place, an interior following, something only possible with grace. Therefore, following Christ leads us inexorably to mysticism. In this manner a false conception of morality is avoided, one excessively focused on obligations, on the definition of what is sinful and the determination of types of sin. Tillmann’s proposal is not limited to a morality of minimums, since he has in view the call to holiness. Tillmann’s manual sowed the seed that later grew and nourished theological reflection in the twentieth century. This path leads to the encyclical Veritatis Splendor of St. John Paul II, in which the Magisterium of the Church explicitly affirms that the following of Christ is the essential and original foundation of Christian morality. With the contribution of the category of «following Christ», Tillmann presents himself as one of the most important innovators of Catholic morality in the twentieth century

    Guía metodológica para el control de vulnerabilidades informáticas en dispositivos IOT (Internet of the Things) para redes HAN (Home Area Network).

    Get PDF
    El objetivo de la presente investigación fue generar un documento técnico e informativo enmarcado en la educación en seguridad informática que sirva como guía a las personas en general para promover el uso correcto y seguro de las tecnologías denominadas IoT ”Internet de las Cosas” presentes en su vida cotidiana y en el hogar, de esta manera mediante este marco de orientación donde a través de un análisis de seguridad a las principales tecnologías inalámbricas presentes en el hogar se ha podido generar información de recomendaciones y buenas prácticas para desarrollar en ellos una cultura de concientización sobre los riesgos informáticos presentes en el uso de estos dispositivos y la forma adecuada y segura de implementarlos, configurarlos y utilizarlos. Para el desarrollo de este estudio se aplicaron varias metodologías de investigación donde se recabaron datos referentes al funcionamiento y vulnerabilidades de las tecnologías inalámbricas más presentes en el hogar así también se realizaron pruebas de concepto y experimentación para evidenciar la existencia de estas vulnerabilidades y la forma adecuada de mitigarlas. Mediante la formulación de una encuesta dirigida al personal administrativo de una entidad pública se determinó que un porcentaje importante de los mismos desconocían aspectos básicos de seguridad informática de sus dispositivos IoT y la forma adecuada de manejarlos para un uso seguro dentro de su hogar. Con los resultados obtenidos se pudo validar la importancia de contar con este tipo de información a través de una guía que permitirá a las personas a tener un mejor conocimiento de seguridad y manejan de sus dispositivos IoT cuando accedan desde su red casera a redes externas como Internet y evitar que su información sensible y privada esté al alcance de los ciberdelincuentes.The aim of this research was to generate a technical and informative document enclosed in safety computer education that assists as a guide for people in general to promote the correct and safe use of the technologies called IoT "Internet of Things" present in their daily life and at home. Thus, through this guidance framework where, through a security analysis of the main wireless technologies at home, it has been possible to generate information on recommendations and good practices to develop a culture of awareness on the computer risks present in the use of these devices and the appropriate and safe way to implement, configure, and use them. For the development of this study, several research methodologies were applied where data regarding to the operation and vulnerabilities of the wireless technology most present at home were collected, as well as tests of concept and experimentation to demonstrate the existence of these vulnerabilities and the appropriate way to mitigate them. Through the formulation of a survey directed to the administrative personnel of a public entity, it was determined that a significant percentage of them were unaware of basic computer safety aspects of their IoT devices and the appropriate way to handle them for safety use at home. With the results obtained, the importance of having this type of information could be validated through a guide that will allow people to have a better knowledge of security and manage their IoT devices when they access external networks such as the Internet from their home network and prevent your sensitive and private information from being accessible to cybercriminals

    Trabajo de titulación bajo la modalidad de Proyecto Técnico, previo a la obtención del título de Ingeniero Industrial

    Get PDF
    El Cantón Salcedo a partir de mayo del 2015 cuenta con un nuevo y moderno terminal terrestre, construido por el Municipio, esta infraestructura está ubicada en el barrio Pungahuito al norte de la ciudad, en la actualidad los procesos operativos se realizan de manera empírica por lo que carecen de tecnicismo y no están estandarizados. El objetivo de esta investigación es estudiar los procesos operativos y su incidencia en la eficiencia laboral en el Terminal Terrestre del GAD Municipal del Cantón Salcedo (GADMCS). Este estudio pretende contribuir a mejorar el desarrollo de los procesos y actividades que realizan los empleados, con la hipótesis: Si los procesos operativos tienen relación con la eficiencia laboral en el Terminal Terrestre del (GADMCS). La metodología aplicada permitió analizar el comportamiento actual de los procesos operativos que se manejan en esta institución, las técnicas aplicadas fueron la check list, observación, estudio de tiempos y representación de procesos. La población de estudio fue el personal directivo, administrativo y operativo que son 17 personas. Dentro de los principales hallazgos que se encontraron están; No se cumplen en su totalidad las funciones asignadas, no constan todos los procesos según lo estipulado en el manual de funciones; tampoco se interrelacionan las actividades; los procesos no están estructurados de manera técnica. Actualmente existen 4 procesos con 23 actividades, de las cuales se cumplen el 76%. El tiempo promedio normal de todos los procesos es de 11.39 minutos, la eficiencia laboral se determinó en función de tiempos tomando en cuenta el desperdicio por cada actividad, obteniendo una eficiencia promedio de 72,40% lo que es valorada como buena. Para la validación de la hipótesis se aplicó estadística descriptiva y coeficiente de correlación de Pearson, obteniéndose como resultado que existe relación entre las variables de estudio
    corecore