Ultra-Broadband Directional Couplers Using Microstrip with Dielectric Overlay in Millimeter-Wave Band

Nowadays, millimeter-wave systems are being a key factor to develop wide band applications. In this paper, a directional coupler in millimeter-wave band using dielectric overlay is presented. This leads us to technology aspects, in directional coupler design, are key points to achieve the proper response of the circuit. The coupler proposed in this paper covers the 15-45 GHz band and its response has 15-dB coupling-level, 1-dB coupling-ripple and a reflection coefficient better than 10 dB

Regulation and development: theoretical contributions and empirical lessons from Latin America

How do regulation and development relate to each other? Despite the centrality of this question to the worlds of research and practice, surprisingly little scholarship has reflected on the nexus between regulation and development. Existing studies are mainly concerned with the design and operation of regulatory institutions and instruments in developed countries. Regulatory propositions about ‘developing’ countries have, however, remained at a rather general level. This introductory article and the following set of contributions intend to broaden our understanding on how regulation and development relate to each other with a particular emphasis on Latin America. This article introduces key debates and themes as well as an analytical framework that incorporates the various dimensions of the regulation-development nexus. It also discusses the literature on regulation in Latin America. Following a brief overview of the articles in this special issue, we conclude with reflections regarding future research on the relationship between regulation and development

Molecular lines as tracers of Compton-thick AGN ?

Recently, Papadopoulos et al., 2010 using sub-mm CO molecular line observations of nearby ultra-luminous IRAS galaxies, (U)LIRGs, have found that exceptionally large gas column densities (N_H > 10^25 cm-2) can be present across some of the very dense gaseous disks that are typically found in these objects. They also proposed a diagnostic for finding such sources using CO and HCN molecular lines. Given that such high column densities are expected to absorb any X-ray luminous AGN, yielding Compton-thick sources, we set out toexplore whether this can be discerned using X-ray observations. More specifically we examine X-ray spectral observations of 14 sources in their sample, using public Chandra observations (0.5-10 keV) for eleven sources as well as BeppoSAX results (2-100 keV) from the literature for another three sources. Our goal is to find candidate Compton-thick AGN and to check whether the molecular line selection criterion is successful in selecting such systems. X-ray spectroscopy reveals four candidate Compton-thick AGN of which half fall within the high obscuration region in the molecular line ratio diagnostics. Of the remaining five sources falling into the `high dust obscuration' box, one (Mrk273) is highly obscured (N_H ~4x10^23 cm-2) while in the other four the X-ray emission is most probably associated with star-forming processes rather than an AGN on the basis of their X-ray and mid-infrared properties. Overall, we argue that although this method as expected cannot recover all Compton-thick AGN, there are no examples of X-ray luminous AGN inside that region that have low obscuration, suggesting that this method is efficient in finding heavily obscured AGN in dust-enshrouded star-forming galaxies. The above results bear important implications for future joint ALMA and X-ray observations for the detection of Compton-thick AGN.Comment: To appear in A&A Letter

Non-homogeneuos conduction of conductive filaments in Ni/HfO2/Si resistive switching structures observed with CAFM

Altres ajuts: ERDF/TEC2011-2792-C02-02Conductive filaments (CFs) in Ni/HfO₂/Si resistive switching structures are analysed at the nanoscale by means of Conductive Atomic Force Microscopy (CAFM). Differences in the CF conductivity are measured depending on the resistive state of the device. Moreover, for both resistance states, non-homogeneous conduction across the CF area is observed, in agreement with a tree-shaped CF

Low temperature back-surface-field contacts deposited by Hot-wire CVD for heterojunction solar cells

The growing interest in using thinner wafers (< 200 μm) requires the development of low temperature passivation strategies for the back contact of heterojunction solar cells. In this work, we investigate low temperature deposited back contacts based on boron-doped amorphous silicon films obtained by Hot-Wire CVD. The influence of the deposition parameters and the use of an intrinsic buffer layer have been considered. The microstructure of the deposited thin films has been comprehensively studied by Spectroscopic Ellipsometry in the UV-visible range. The effective recombination velocity at the back surface has been measured by the Quasi-Steady-State Photoconductance technique. Complete double-side heterojunction solar cells (1 cm 2) have been fabricated and characterized by External Quantum Efficiency and current-voltage measurements. Total-area conversion efficiencies up to 14.5% were achieved in a fully low temperature process (< 200 °C)

The knee prosthesis constraint dilemma: Biomechanical comparison between varus-valgus constrained implants and rotating hinge prosthesis. A cadaver study

The real degree of constriction of rotating hinge knee (RHK) and condylar constrained prostheses (CCK) is a matter of discussion in revision knee arthroplasty. The objectives of this study are to compare the tibial rotation of both implants and validate the use of inertial sensors with optical tracking system as movement measurement tools. A total of 16 cadaver knees were used. Eight knees were replaced using a RHK (Endomodel LINK), and the remaining eight received a CCK prosthesis (LCCK, Zimmer). Tibial rotation range of motion was measured in full extension and at 30°, 60°, and 90° of flexion, with four continuous waveforms for each measurement. Measurements were made using two inertial sensors with specific software and compared with measurements obtained using the gold standard technique - the motion capture camera. The comparison of the accuracy of both measurement methods showed no statistically significant differences between inertial sensors and motion capture cameras, with p > .1; the mean error for tibial rotation was 0.21°. Tibial rotation in the RHK was significantly greater than in the CCK (5.25° vs. 2.28°, respectively), p < .05. We have shown that RHK permit greater tibial rotation, being closer to physiological values than CCKs. Inertial sensors have been validated as an effective and accurate method of measuring knee movement. The clinical significance: RHK appears to represent a lower constriction degree than CCK systems.This study wassupported by Ministerio de Ciencia, Innovación y Universidades, Instituto de Salud Carlos III and European Regional Development Fund "Una manera de hacer Europa" (grant number PI18/01625

The Pristine survey -- XXII. A serendipitous discovery of an extremely Li-rich very metal-poor giant and a new method of 6^6Li/7^7Li isotope measurement

We report the serendipitous discovery of a very metal-poor (VMP) Li-rich giant star ($T_{\rm eff}$ = 4690$\pm$80 K, log g = 1.34$\pm$0.13, [Fe/H] = $-2.43\pm$0.07). We analyse the Li I 6103 and 6707 \r{A} lines accounting for departures from local thermodynamic equilibrium (NLTE) and correcting for 3D effects using literature data, which yields a lithium abundance $\log\varepsilon_{Li} = 3.42\pm0.07$. Comparing lithium abundances from the two lines, in 1D NLTE we measure the isotope ratio $^6$Li/$^7$Li = 1.64$^{+1.49}_{-1.08}$ %. When correcting for 3D effects, we detect the fragile $^6$Li isotope at $2$-sigma level and the ratio $^6$Li/$^7$Li = 5.65$^{+5.05}_{-2.51}$ %. To our knowledge, this is the first $^6$Li/$^7$Li measurement in an extremely Li-rich VMP star. The Cameron-Fowler mechanism, which is proposed to produce Li-rich stars, does not imply $^6$Li production and is therefore inconsistent with our measurement when applying 3D corrections. We also derive NLTE abundances for 16 elements, most of which show similar abundances to those found in VMP stars. Sodium is an exception: [Na/Fe]$_{\rm NLTE, 1D}$ = 0.07 $\pm 0.03$, which is 0.5 dex higher than what is typical for VMP stars. This star joins the sample of rare Li-rich VMP stars, and we offer a novel way to constrain the source of lithium in such stars through isotope ratio measurements.Comment: accepted for publication in MNRA

Determinación y validación de las cuencas hidrográficas de la Isla de Gran Canaria (Islas Canarias, España)

En el presente trabajo se plantea una metodología para la obtención y validación de dos elementos fundamentales en cualquier aplicación SIG hidrológica, que son las cuencas hidrográficas y los cursos de aguas o redes de drenaje (thalwegs). Como bien es sabido en la cartografía oficial a cualquier escala se definen los thalwegs, pero no así las cuencas hidrográficas, las cuales se pueden llegar a definir con la ayuda de un MDE (Modelo Digital de Elevaciones). A través de procesos automáticos en un SIG, se definen las cuencas hidrográficas. Se ha de evaluar la precisión de las mismas en función del paso de malla elegido en el MDE. Y de igual forma, se validan los thalwegs de la cartografía, ya que estos pueden poseer errores de posicionamiento.Peer ReviewedPostprint (published version

Microscopic analysis of shot-noise suppression in nondegenerate diffusive conductors

We present a theoretical investigation of shot-noise suppression due to long-range Coulomb interaction in nondegenerate diffusive conductors. Calculations make use of an ensemble Monte Carlo simulator self-consistently coupled with a one-dimensional Poisson solver. We analyze the noise in a lightly doped active region surrounded by two contacts acting as thermal reservoirs. By taking the doping of the injecting contacts and the applied voltage as variable parameters, the influence of elastic and inelastic scattering in the active region is investigated. The transition from ballistic to diffusive transport regimes under different contact injecting statistics is analyzed and discussed. Provided significant space-charge effects take place inside the active region, long-range Coulomb interaction is found to play an essential role in suppressing the shot noise at $qU \gg k_BT$. In the elastic diffusive regime, momentum space dimensionality is found to modify the suppression factor $\gamma$, which within numerical uncertainty takes values respectively of about 1/3, 1/2 and 0.7 in the 3D, 2D and 1D cases. In the inelastic diffusive regime, shot noise is suppressed to the thermal value.Comment: 11 pages, 13 figure