Synthesis and Effect of CaTiO3 formation in CaO·Al2O3 by Solid-State Reaction from CaCO3· Al2O3 and Ti

CaO⋅Al2O3/CaTiO3 material was synthesized by a solid-state reaction. The effects of CaTiO3 formed into the CaO⋅Al2O3 during the synthesized process on the microstructure and mechanical properties were studied. CaCO3 was obtained from snail shells, Al2O3, and Ti powders were employed as a raw material. A chemical system with a 1:1 M ratio between CaCO3 and Al2O3 was formed, with an addition of 10 wt% Ti metallic particles. The microstructural analysis through optical microscopy, scanning electron microscopy, and X-ray diffraction was realized. The apparent density was determined by the Archimedes method, and the mechanical behavior (hardness, fracture toughness, and transversal elastic modulus) were also determined. XRD analysis revealed the formation of calcium aluminate phases such as CaAl2O4, CaAl4O7, and CaAl12O19; in addition, the CaTiO3 phase was also identified. The in-situ formation of CaTiO3 in the ceramic material, improves the mechanical properties such as the transversal elastic modulus and fracture toughness (48 GPa and 1.32 MPa m1/2, respectively) in comparison to the reference material (55 GPa and 0.43 MPa m1/2, respectively). Changes in the microstructural morphology, bulk density, and hardness values were also observed with a positive effect in the compound material

A Piezoelectric Plethysmograph Sensor Based on a Pt Wire Implanted Lead Lanthanum Zirconate Titanate Bulk Ceramic

This work reports on the development of a Lead Lanthanum Zirconate Titanate (PLZT) bulk ferroelectric poled ceramic structure as a Piezoelectric Plethysmograph (PZPG) sensor. The ceramic was implanted during its fabrication with a platinum (Pt) wire which works as an internal electrode. The ceramic was then submitted to an experimental setup in order to validate and determine the Pt-wire mechanical effects. This PZPG sensor was also mounted on a finger splint in order to measure the blood flow that results from the pulsations of blood occurring with each heartbeat. Fingertip pulses were recorded jointly with an ECG signal from a 25 year old male to compare the time shift; the PZPG sensor guarantees the electrical isolation of the patient. The proposed PZPG has several advantages: it can be adjusted for fingertip measurements, but it can easily be extended by means of spare bands, therefore making possible PZPG measurements from different body locations, e.g., forehead, forearm, knee, neck, etc

Synthesis and Characterization of Zn-Ni x

Mechanical ball milling assisted by sintering in the solid state was used in this research to produce the Zn-Nix system alloy. The derivative powder compositions of Zn-Nix (x = 0, 5, 10, 15, and 20 wt.%) were obtained to study the Ni effects on the microstructural and mechanical properties. It is worth remarking that conventional methods are not appropriate for the manufacture of the Zn-Nix system alloy. The morphological structure and phases were examined by optical microscopy, X-ray diffraction, and SEM/EDS elemental mapping, whereas the mechanical behavior was accomplished by means of a diamond indentation print (Hardness Vickers). The results showed that the intermetallic γ-ZnNi phase did not form during milling time (<4 h); it appears after the sintering process, which is associated with atomic diffusion mechanism through grain boundary at the minimum interfacial energy (ΔG256°C = −13.83 kJ·mol−1). The powder Zn-Ni10 was found to have better properties. Semispherical coarser particles were seen into the metal matrix (Zn δ-hcp structure) as segregates; however, each particle contains an intermetallic compound Zn-Ni that encloses the Ni (α-fcc structure) pure phase. The Ni-α phase was then transformed into a γ-ZnNi intermetallic compound which shifts to higher values of mechanical hardness from about 60 HV to 400 HV units

Tenacidad a la fractura de compuestos cermets 3Al2O3*2SiO2/Ag manufacturados por molienda de alta energía

La fabricación de materiales compuestos de matriz cerámica reforzados con partículas metálicas han propiciado la formación de nuevos materiales conocidos como compuestos CERMETS, materiales que debido a sus elementos precursores poseen propiedades distintas a las de los materiales convencionales. En este trabajo se establece la ruta de fabricación de materiales compuestos cermets base 3Al2O3*2SiO2 reforzados con partículas metálicas de Ag a partir de la formación de la composición química en peso de polvos de 3Al2O3*2SiO2 / 1% Ag en busca de un aumento en la tenacidad a la fractura con respecto al cerámico base. La composición química de polvos es sometida a un proceso de mezcla molienda de alta energía en seco en un molino tipo planetario por 2 horas a 200 rpm. Los polvos posteriormente son conformados en muestras cilíndricas de 20 mm de diámetro y 3 mm de espesor mediante la aplicación de carga uniaxial en frío de 200 MPa. Las muestras son sinterizadas a 1500°C y 1600°C por una y dos horas en un horno de resistencia eléctrica en atmósfera controlada de gas nitrógeno. Los compuestos fabricados son analizados microestructuralmente por microscopia óptica y electrónica de barrido. Se determina la densidad y las propiedades mecánicas de dureza y tenacidad a la fractura, las dos últimas por el método de indentación. Los resultados muestran la viabilidad de fabricación de materiales compuestos cermets así como los cambios en la densidad, la dureza y la tenacidad a la fractura, con respecto al cerámico 3Al2O3*2SiO2 sin refuerzo metálico

CIBERER : Spanish national network for research on rare diseases: A highly productive collaborative initiative

Altres ajuts: Instituto de Salud Carlos III (ISCIII); Ministerio de Ciencia e Innovación.CIBER (Center for Biomedical Network Research; Centro de Investigación Biomédica En Red) is a public national consortium created in 2006 under the umbrella of the Spanish National Institute of Health Carlos III (ISCIII). This innovative research structure comprises 11 different specific areas dedicated to the main public health priorities in the National Health System. CIBERER, the thematic area of CIBER focused on rare diseases (RDs) currently consists of 75 research groups belonging to universities, research centers, and hospitals of the entire country. CIBERER's mission is to be a center prioritizing and favoring collaboration and cooperation between biomedical and clinical research groups, with special emphasis on the aspects of genetic, molecular, biochemical, and cellular research of RDs. This research is the basis for providing new tools for the diagnosis and therapy of low-prevalence diseases, in line with the International Rare Diseases Research Consortium (IRDiRC) objectives, thus favoring translational research between the scientific environment of the laboratory and the clinical setting of health centers. In this article, we intend to review CIBERER's 15-year journey and summarize the main results obtained in terms of internationalization, scientific production, contributions toward the discovery of new therapies and novel genes associated to diseases, cooperation with patients' associations and many other topics related to RD research

Diseño, Construcción y Estudio de la Eficiencia de los Paneles Verdes, Mediante un Sistema de Monitorización de Variables Físicas.

Para el presente artículo, se realizó una tarea, de diseñar, construir y estudiar, el comportamiento de las variables; temperatura, humedad relativa, humedad del substrato, cantidad de luxes,vibraciones mecánicas y telúricas, por medio de un sistema de monitoreo automático que realizaba capturas de dichas variables desde sensores acoplados a una tarjeta Arduino y mandaba los datos a un ordenador vía alámbrica, con un intervalo de tiempo deinido por código abierto, creando inmensas bases de datos para que sus cifras fueran estudiadas, mediante medidas de tendencia central y estudio de series de tiempo, aplicando modelos de regresión lineal simple y múltiple con ecuaciones logarítmicas, cuadráticas, etc. Al graficar las observaciones por medio de software estadístico como R estudio de código abierto, se demostró la relación que existía entre variables y sus frecuencias, densidades e histogramas, los cuales ayudaron a la interpretación de los datos. Al terminar el análisis de regresión lineal, se obtuvieron resultados que confirman la eficiencia de los paneles verdes en la maqueta que se construyó, dando resultados que reforzaban la hipótesis del experimento, demostrando que las cubiertas vegetales instaladas en edificios reducen hasta en 8 °C la temperatura atmosférica y la humedad relativa del viento se potencializa hasta en 15 % más que en un edificio común

Tenacidad a la fractura de compuestos cermets 3Al2O3*2SiO2/Ag manufacturados por molienda de alta energía

La fabricación de materiales compuestos de matriz cerámica reforzados con partículas metálicas han propiciado la formación de nuevos materiales conocidos como compuestos CERMETS, materiales que debido a sus elementos precursores poseen propiedades distintas a las de los materiales convencionales. En este trabajo se establece la ruta de fabricación de materiales compuestos cermets base 3Al2O3*2SiO2 reforzados con partículas metálicas de Ag a partir de la formación de la composición química en peso de polvos de 3Al2O3*2SiO2 / 1% Ag en busca de un aumento en la tenacidad a la fractura con respecto al cerámico base. La composición química de polvos es sometida a un proceso de mezcla molienda de alta energía en seco en un molino tipo planetario por 2 horas a 200 rpm. Los polvos posteriormente son conformados en muestras cilíndricas de 20 mm de diámetro y 3 mm de espesor mediante la aplicación de carga uniaxial en frío de 200 MPa. Las muestras son sinterizadas a 1500°C y 1600°C por una y dos horas en un horno de resistencia eléctrica en atmósfera controlada de gas nitrógeno. Los compuestos fabricados son analizados microestructuralmente por microscopia óptica y electrónica de barrido. Se determina la densidad y las propiedades mecánicas de dureza y tenacidad a la fractura, las dos últimas por el método de indentación. Los resultados muestran la viabilidad de fabricación de materiales compuestos cermets así como los cambios en la densidad, la dureza y la tenacidad a la fractura, con respecto al cerámico 3Al2O3*2SiO2 sin refuerzo metálico

A PLZT Novel Sensor with Pt Implanted for Biomedical Application: Cardiac Micropulses Detection on Human Skin

Advances in sensors for biomedical applications have been a great motivation. In this research, a PLZT (lead lanthanum zirconate titanate) novel sensor with platinum wire implanted in its longitudinal section was developed through of the synthesis process based on powder technology. The raw materials as lead (PbO), lanthanum (La2O3), zircon (ZrO2), and titanium (TiO2) were used in the formation of the chemical composition (62.8% PbO, 4.5% La2O3, 24.2% ZrO2, and 8.5% TiO2). Then, these powders were submitted to mix-mechanical milling at high energy; cylindrical samples with the implant of the platinum wire were obtained with the load application. Finally, the compacted samples were sintered at 1200°C for 2 hours, then followed by a polarization potential of 1500 V/mm at 60°C to obtain a novel sensor. The density and porosity were evaluated using the Archimedes’ principle, while the mechanical properties such as fracture toughness value and Young’s modulus were determined by indentation and ultrasonic methods, respectively. A microscopic examination was also carried out to investigate the structural properties of the material. The PLZT novel sensor is electronically arranged for monitoring the cardiac pulses through a data acquisition system. The results obtained in this research are analyzed and discussed

Refractory Ceramics Synthesis by Solid-State Reaction Between CaCO3 (Mollusk Shell) And Al2O3 Powders.

Calcium aluminate-based refractory ceramic was developed as an innovative refractory material, using garden snail (Helix aspersa) shells as a natural source of CaCO3. A 1:1 molar ratio mixture of CaC O3 from snail shells and commercial Al2O3 powder was prepared by means of high-energy mechanical milling. The mixed powder was compacted in cylindrical samples (disks) and consolidated by sintering at 1450°C and 1500°C for 1h. The density and porosity were evaluated using the Archimedes principle, while the mechanical properties (hardness, fracture toughness, and shear modulus) were determined by indentation and ultrasonic methods, respectively. The thermal shock resistance was tested by heating samples to temperatures between 900 and 1400°C and subsequent quenching in water at room temperature. X-ray diffraction patterns of sintered samples indicate the formation of different calcium aluminate phases, such as CaAl12O (krotite/monoclinic),CaAl4O7 (grossite/monoclinic) and CaAl2O (hibonite-5H/hexagonal). The fracture toughness and shear modulus values of materials sintered at 1450°C were higher (0.48 MPa•m1/2)) and 59 GPa, respectively than those of materials sintered at 1500°C (0.43 MPa•m1/ 2 and 55 GPa, respectively). Also changes in the bulk density, hardness and thermal shock resistance values were observed in materials sintered at 1450°C and 1500°C