52 research outputs found
Marginal adaptation of composite restorations photoactivated by LED, plasma arc, and QTH light using low-modulus resin liners
Purpose: The aim of this study was to evaluate the influence of resin liners on the marginal adaptation to dentin of resin composite restorations photoactivated by a conventional quartz-tungsten halogen lamp (QTH), light emitting diodes (LED), and a plasma arc light (PAC). Materials and Methods: The buccal surfaces of 120 bovine incisors were ground until a flat dentin area was obtained. A circular cavity (4 mm in diameter x 1.5 mm in depth) was prepared in this area. Scotchbond Multi Purpose was applied in the cavities following the manufacturer's instructions. The specimens were randomly assigned into 4 groups according to the lining technique: (1) control (1 adhesive layer); (2) three adhesive layers; (3) Filtek Flow; (4) Protect Liner F. Each group was further divided into 3 subgroups according to the light-curing method: (A) QTH; (B) LED; (C) PAC. All cavities were then restored with a single increment of Filtek Z250 restorative composite and polished. Caries Detector was applied to each specimen for 5 s. Images of dye-stained gaps were observed under a stereomicroscope and transferred to a computer measurement program. Gap values were obtained by dividing the dyed margin length by the total cavity length, then multiplying by 100. Data were analyzed using ANOVA and Tukey's test (p<0.05). Results: All the tested lining techniques significantly decreased marginal gap formation when compared with the control group only for the QTH light groups. There was no significant difference among the light-curing methods. Conclusion: The use of resin liners can effectively reduce the gap formation along dentin margins, but only when QTH light is used.8422322
The prevalence of dental erosion and associated risk factors in 12-13-year-old school children in Southern China
<p>Abstract</p> <p>Background</p> <p>Dental erosion has been investigated in developed and developing countries and the prevalence varies considerably in different countries, geographic locations, and age groups. With the lifestyle of the Chinese people changing significantly over the decades, dental erosion has begun to receive more attention. However, the information about dental erosion in China is scarce. The purpose of this study was to explore the prevalence of dental erosion and associated risk factors in 12-13-year-old school children in Guangzhou, Southern China.</p> <p>Methods</p> <p>This cross-sectional survey was performed by two trained, calibrated examiners. A stratified random sample of 12-13-year-old children (774 boys and 725 girls) from 10 schools was examined for dental erosion using the diagnostic criteria of Eccles and the index of O'Sullivan was applied to record the distribution, severity, and amount of the lesions. Data on the socio-economic status, health behaviours, and general health involved in the etiology of dental erosion were obtained from a self-completed questionnaire. The analyses were performed using SPSS software.</p> <p>Results</p> <p>At least one tooth surface with signs of erosion was found in 416 children (27.3%). The most frequently affected teeth were the central incisors (upper central incisors, 16.3% and 15.9%; lower central incisors, 17.4% and 14.8%). The most frequently affected surface was the incisal or occlusal edge (43.2%). The loss of enamel contour was present in 54.6% of the tooth surfaces with erosion. Of the affected tooth surfaces, 69.3% had greater than one-half of the tooth surface was affected. The results from logistic regression analysis demonstrated that the children who were female, consumed carbonated drinks once a week or more, and those whose mothers were educated to the primary level tended to have more dental erosion.</p> <p>Conclusions</p> <p>Dental erosion in 12-13-year-old Chinese school children is becoming a significant problem. A strategy of offering preventive care, including more campaigns promoting a healthier lifestyle for those at risk of dental erosion should be conducted in Chinese children and their parents.</p
Awareness and knowledge of dental erosion among Yemeni dental professionals and students
Erosive cola-based drinks affect the bonding to enamel surface: an in vitro study
Objective: This study aimed to assess the impact of in vitro erosion provoked by different cola-based drinks (Coke types), associated or not with toothbrushing, to bonding to enamel. Material and methods: Forty-six bovine enamel specimens were prepared and randomly assigned into seven groups (N=8): C- Control (neither eroded nor abraded), ERO-RC: 3x/1-minute immersion in Regular Coke (RC), ERO-LC: 3x/1-minute immersion in Light Coke (LC), ERO-ZC: 3x/1-minute immersion in Zero Coke (ZC) and three other eroded groups, subsequently abraded for 1-minute toothbrushing (EROAB-RC, EROAB-LC and EROAB-ZC, respectively). After challenges, they were stored overnight in artificial saliva for a total of 24 hours and restored with Adper Single Bond 2/Filtek Z350. Buildup coronal surfaces were cut in 1 mm2 -specimens and subjected to a microtensile test. Data were statistically analyzed by two-way ANOVA/Bonferroni tests (α=0.05). Failure modes were assessed by optical microscopy (X40). The Interface of the restorations were observed using Confocal Laser Scanning Microscopy (CLSM). Results: All tested cola-based drinks significantly reduced the bond strength, which was also observed in the analyses of interfaces. Toothbrushing did not have any impact on the bond strength. CLSM showed that except for Zero Coke, all eroded specimens resulted in irregular hybrid layer formation. Conclusions: All cola-based drinks reduced the bond strength. Different patterns of hybrid layers were obtained revealing their impact, except for ZC
Impact of adhesive and photoactivation method on sealant integrity and polymer network formation
Effect of erosive challenges on deciduous teeth undergoing restorative procedures with different adhesive protocols - an in vitro study
The prevalence and risk indicators of tooth wear in 12- and 15-year-old adolescents in Central China
Effect of sodium hypochlorite on dentin bonding in primary teeth
Purpose: The aim of this study was to evaluate the effect of sodium hypochlorite (NaOCl) on the shear bond strength (SBS) using three bonding systems in primary dentin. Materials and Methods: Forty-five sound extracted primary molars were selected. The crowns were longitudinally sectioned, embedded in polystyrene resin, and flattened until a dentin surface was reached. The samples were assigned to 6 groups (n = 15): G1, Single Bond (SB); G2, NaOCl + SB; G3, Prime Bond 2.1 (PB); G4, NaOCl + PB; G5, Clearfil SE Bond (CSE); G6, NaOCl + CSE. All the adhesive systems were applied according to the manufacturers' instructions, except for the application of 10% NaOCl solution for 60 s in groups 2, 4 (after acid etching), and 6 (before applying adhesive system). The composite resin was placed in increments in a mold and light cured for 20 s. The samples were stored in distilled water at 37degreesC for 24 h and submitted to SBS testing with a crosshead speed of 0.5 mm/min. The failure sites were observed with SEM. The data were treated with ANOVA and Tukey's tests (p<0.05). Results: There was no statistically significant difference between the groups with or without treatment of the substrate with NaOCl, regardless the material used. The SBS averages in MPa (+/- SD) were: G1: 15.8(1.9)(a); G2: 14.6(1.3)(a); G3: 10.2(0.7)(a); G4: 9.9(0.2)(a); G5: 13.3(1.2)(a); and G6 10.7(1.0)(a). There was a statistically significant difference between the materials (SB greater than or equal to CSE greater than or equal to PB). Mixed failure was the failure type most frequently observed for all groups. Conclusion: Dentin surface treatment with NaOCl did not affect the resin-dentin bonding strength in primary teeth.6430731
Effect of different photoactivation methods on the bond strength of composite resin restorations by push-out test
Objective: Modulated curing methods could lead to a higher probability of bond preservation. Therefore, the aim of this study was to evaluate the effect of 7 curing methods on bond strength of composite resin restorations. Method and Materials: Seventy bovine incisors were selected. A conical cavity was prepared in the buccal surface. Adper Single Bond adhesive system was applied according to the manufacturer's instructions, and the cavities were filled with a single increment of Esthet X (Dentsply/Caulk). The specimens were randomly assigned into 7 groups (n = 10) according to the photoactivation method: (1) continuous light 700 (700 mW/cm(2)) (control); (2) continuous light 150 (150 mW/cm(2)); (3) continuous light 250 (250 mW/cm(2)); (4) soft-start 75 (75 mW/cm(2) + 700 mW/cm(2)); (5) soft-start 150 (150 mW/cm(2) + 700 mW/cm(2)); (6) pulse-delay (150 mW/cm(2) + 3 minutes + 700 mW/cm(2)); and (7) intermittent light (cycles at 600 mW/cm(2)). The energy density for all groups was 14 J/cm(2). The bond strength of the composite restorations was measured by performing the push-out test in a universal testing machine (Instron). The results were submitted to ANOVA and Tukey test (P < .05). Results: Pulse-delay, soft-start 150, and soft-start 75 methods showed a significant increase in bond strength when compared with the control continuous light 700 method. Low power density and intermittent light groups showed intermediate results. Conclusion: Modulation of the energy density during light curing of composite resins using pulse-delay or soft-start methods increased the bond strength of composite restorations.39324324
- …