Impact of contact overlap on transconductance and noise in organic electrochemical transistors

Abstract Organic electrochemical transistors (OECTs) from poly(3,4-ethylenedioxythiophene) doped with polystyrene sulfonate (PEDOT:PSS) are used as amplifying transducers for bioelectronics. Although the impact on performance of device geometry parameters such as channel area and thickness has been widely explored, the overlap between the semiconductor film and the source and drain contacts has not been considered. Here we vary this overlap and explore its impact on transconductance and noise. We show that increasing contact overlap does not alter the magnitude of the steady-state transconductance but it does decreases the cut-off frequency. Noise was found to be independent of contact overlap and to vary according to the charge noise model. The results show that high-quality contacts can be established in PEDOT:PSS OECTs with minimal overlap.</jats:p

Effect of channel thickness on noise in organic electrochemical transistors

Organic electrochemical transistors (OECTs) have been widely used as transducers in electrophysiology and other biosensing applications. Their identifying characteristic is a transconductance that increases with channel thickness, and this provides a facile mechanism to achieve high signal amplification. However, little is known about their noise behavior. Here, we investigate noise and extract metrics for the signal-to-noise ratio and limit of detection in OECTs with different channel thicknesses. These metrics are shown to improve as the channel thickness increases, demonstrating that OECTs can be easily optimized to show not only high amplification, but also low noise.</jats:p

A Na+ conducting hydrogel for protection of organic electrochemical transistors.

Organic electrochemical transistors (OECTs) are being intensively developed for applications in electronics and biological interfacing. These devices rely on ions injected in a polymer film from an aqueous liquid electrolyte for their operation. However, the development of solid or semi-solid electrolytes are needed for future integration of OECTs into flexible, printed or conformable bioelectronic devices. Here, we present a new polyethylene glycol hydrogel with high Na+ conductivity which is particularly suitable for OECTs. This novel hydrogel was synthesized using cost-effective photopolymerization of poly(ethylene glycol)-dimethacrylate and sodium acrylate. Due to the high water content (83% w/w) and the presence of free Na+, the hydrogel showed high ionic conductivity values at room temperature (10-2 S cm-1) as characterized by electrochemical impedance spectroscopy. OECTs made using this hydrogel as a source of ions showed performance that was equivalent to that of OECTs employing a liquid electrolyte. They also showed improved stability, with only a 3% drop in current after 6 h of operation. This hydrogel paves the way for the replacement of liquid electrolytes in high performance OECTs bringing about advantages in terms of device integration and protection

Study of pallial neurogenesis in shark embryos and the evolutionary origin of the subventricular zone

The dorsal part of the developing telencephalon is one of the brain areas that has suffered most drastic changes throughout vertebrate evolution. Its evolutionary increase in complexity was thought to be partly achieved by the appearance of a new neurogenic niche in the embryonic subventricular zone (SVZ). Here, a new kind of amplifying progenitors (basal progenitors) expressing Tbr2, undergo a second round of divisions, which is believed to have contributed to the expansion of the neocortex. Accordingly, the existence of a pallial SVZ has been classically considered exclusive of mammals. However, the lack of studies in ancient vertebrates precludes any clear conclusion about the evolutionary origin of the SVZ and the neurogenic mechanisms that rule pallial development. In this work, we explore pallial neurogenesis in a basal vertebrate, the shark Scyliorhinus canicula, through the study of the expression patterns of several neurogenic markers. We found that apical progenitors and radial migration are present in sharks, and therefore, their presence must be highly conserved throughout evolution. Surprisingly, we detected a subventricular band of ScTbr2-expressing cells, some of which also expressed mitotic markers, indicating that the existence of basal progenitors should be considered an ancestral condition rather than a novelty of mammals or amniotes. Finally, we report that the transcriptional program for the specification of glutamatergic pallial cells (Pax6, Tbr2, NeuroD, Tbr1) is also present in sharks. However, the segregation of these markers into different cell types is not clear yet, which may be linked to the lack of layering in anamniotesThis work was supported by the Spanish Ministerio de Economía y Competitividad-FEDER (BFU2014-5863-1P)S

When Bio Meets Technology: Biohybrid Neural Interfaces

The development of electronics capable of interfacing with the nervous system is a rapidly advancing field with applications in basic science and clinical translation. Devices containing arrays of electrodes can be used in the study of cells grown in culture or can be implanted into damaged or dysfunctional tissue to restore normal function. While devices are typically designed and used exclusively for one of these two purposes, there have been increasing efforts in developing implantable electrode arrays capable of housing cultured cells, referred to as biohybrid implants. Once implanted, the cells within these implants integrate into the tissue, serving as a mediator of the electrode–tissue interface. This biological component offers unique advantages to these implant designs, providing better tissue integration and potentially long-term stability. Herein, an overview of current research into biohybrid devices, as well as the historical background that led to their development are provided, based on the host anatomical location for which they are designed (CNS, PNS, or special senses). Finally, a summary of the key challenges of this technology and potential future research directions are presented

Electrically controlled cellular migration on a periodically micropatterned PEDOT:PSS conducting polymer platform

© 2018 Wiley Periodicals, Inc. In the field of tissue engineering, the study of cellular adhesion and migration is of crucial interest. Conducting polymers such as poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) provide an outstanding interface with biology due to their soft nature, which is closer to the mechanical, chemical, and morphological properties of biological systems. In this work, periodically micropatterned PEDOT:PSS thin films are used as a platform to investigate cellular migration. Human cerebral microvascular endothelial cells (hCMEC) show alignment and linear motion along PEDOT:PSS microstripes of varying widths (10–30 μm). In addition, an electrochemical gradient is created on the PEDOT:PSS film along these microstripes to influence the cell behavior. hCMEC cells linearly change their velocities depending on the redox state of the conducting polymer film. This work demonstrates the potential of such conducting polymer platforms to combine, at the same time, several key physicochemical factors for controlling cellular migration. In the future, we envision that these conducting polymer platforms will deliver tools for tissue regeneration and lead to new opportunities in regenerative medicine. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 47029

A Na⁺conducting hydrogel for protection of organic electrochemical transistors

© 2018 The Royal Society of Chemistry. Organic electrochemical transistors (OECTs) are being intensively developed for applications in electronics and biological interfacing. These devices rely on ions injected in a polymer film from an aqueous liquid electrolyte for their operation. However, the development of solid or semi-solid electrolytes are needed for future integration of OECTs into flexible, printed or conformable bioelectronic devices. Here, we present a new polyethylene glycol hydrogel with high Na + conductivity which is particularly suitable for OECTs. This novel hydrogel was synthesized using cost-effective photopolymerization of poly(ethylene glycol)-dimethacrylate and sodium acrylate. Due to the high water content (83% w/w) and the presence of free Na + , the hydrogel showed high ionic conductivity values at room temperature (10 -2 S cm -1 ) as characterized by electrochemical impedance spectroscopy. OECTs made using this hydrogel as a source of ions showed performance that was equivalent to that of OECTs employing a liquid electrolyte. They also showed improved stability, with only a 3% drop in current after 6 h of operation. This hydrogel paves the way for the replacement of liquid electrolytes in high performance OECTs bringing about advantages in terms of device integration and protection

Surfactant protein (Sp-A) expression in human normal and neoplastic breast epithelium.

8nonenoneBraidotti P.; Cigala C.; Graziani D.; Del Curto B.; Dessy E.; Coggi G.; Bosari S.; Pietra GG.Braidotti, P.; Cigala, C.; Graziani, D.; Del Curto, B.; Dessy, Enrico; Coggi, G.; Bosari, S.; Pietra, G. G

Electronics with shape actuation for minimally invasive spinal cord stimulation

Spinal cord stimulation is one of the oldest and most established neuromodulation therapies. However, today, clinicians need to choose between bulky paddle-Type devices, requiring invasive surgery under general anesthetic, and percutaneous lead-type devices, which can be implanted via simple needle puncture under local anesthetic but offer clinical drawbacks when compared with paddle devices. By applying photo-and soft lithography fabrication, we have developed a device that features thin, flexible electronics and integrated fluidic channels. This device can be rolled up into the shape of a standard percutaneous needle then implanted on the site of interest before being expanded in situ, unfurling into its paddle-Type conformation. The device and implantation procedure have been validated in vitro and on human cadaver models. This device paves the way for shape-changing bioelectronic devices that offer a large footprint for sensing or stimulation but are implanted in patients percutaneously in a minimally invasive fashion