10,398 research outputs found
Results of TC-1 boost pump icing tests in the space power facility
A series of tests were conducted in the space power facility to investigate the failure of the Centaur oxidizer boost pump during the Titan/Centaur proof flight February 11, 1974. The three basic objectives of the tests were: (1) demonstrate if an evaporative freezing type failure mechanism could have prevented the pump from operating, (2) determine if steam from the exhaust of one of the attitude control engine could have entered a pump seal cavity and caused the failure, and (3) obtain data on the heating effects of the exhaust plume from a hydrogen peroxide attitude control engine
First results of systematic studies done with different types of Silicon Photomultipliers
The presented results are obtained during the first steps taken in order to
develop a setup and measurement procedures which allow to compare properties of
diverse kinds of silicon photomultipliers. The response to low-intensity light
was studied for silicon photomultipliers produced by CPTA (Russia), Hamamatsu
(Japan), ITC-irst (Italy) and SensL (Ireland).Comment: 3 pages, 3 figures, proceedings of the Internationa Linear Collider
Workshop LCWS2007, Hamburg, German
Fermionic Corrections to Fluid Dynamics from BTZ Black Hole
We reconstruct the complete fermionic orbit of the non-extremal BTZ black
hole by acting with finite supersymmetry transformations. The solution
satisfies the exact supergravity equations of motion to all orders in the
fermonic expansion and the final result is given in terms of fermionic
bilinears. By fluid/gravity correspondence, we derive linearized Navier-Stokes
equations and a set of new differential equations from Rarita-Schwinger
equation. We compute the boundary energy-momentum tensor and we interpret the
result as a perfect fluid with a modified definition of fluid velocity.
Finally, we derive the modified expression for the entropy of the black hole in
terms of the fermionic bilinears.Comment: 21 pages, Latex2e, no figure
Fermionic Wigs for BTZ Black Holes
We compute the wig for the BTZ black hole, namely the complete non-linear
solution of supergravity equations with all fermionic zero modes. We use a
"gauge completion" method starting from AdS_3 Killing spinors to generate the
gravitinos fields associated to the BH and we compute the back-reaction on the
metric. Due to the anticommutative properties of the fermionic hairs the
resummation of these effects truncates at some order. We illustrate the
technique proposed in a precedent paper in a very explicit and analytical form.
We also compute the mass, the angular momentum and other charges with their
corrections.Comment: 11 pages, no figure
Modified gravity models and the central cusp of dark matter haloes in galaxies
The N-body dark matter (DM) simulations point that DM density profiles, e.g. the Navarro Frenk White (NFW) halo, should be cuspy in its centre, but observations disfavour this kind of DM profile. Here we consider whether the observed rotation curves close to the galactic centre can favour modified gravity models in comparison to the NFW halo, and how to quantify such difference. Two explicit modified gravity models are considered, Modified Newtonian Dynamics (MOND) and a more recent approach renormalization group effects in general relativity (RGGR). It is also the purpose of this work to significantly extend the sample on which RGGR has been tested in comparison to other approaches. By analysing 62 galaxies from five samples, we find that (i) there is a radius, given by half the disc scale length, below which RGGR and MOND can match the data about as well or better than NFW, albeit the formers have fewer free parameters; (ii) considering the complete rotation curve data, RGGR could achieve fits with better agreement than MOND, and almost as good as a NFW halo with two free parameters (NFW and RGGR have, respectively, two and one more free parameters than MOND)
Fermions, Wigs, and Attractors
We compute the modifications to the attractor mechanism due to fermionic
corrections. In N=2, D=4 supergravity, at the fourth order, we find a new
contribution to the horizon values of the scalar fields of the vector
multiplets.Comment: v2 : 1+11 pages; paper reorganized in Sections; Sec. 5 added, with
detailed treatment of the axion-dilaton model; some typos fixed and
references adde
The use of the McIlwain L-parameter to estimate cosmic ray vertical cutoff rigidities for different epochs of the geomagnetic field
Secular changes in the geomagnetic field between 1955 and 1980 have been large enough to produce significant differences in both the verical cutoff rigidities and in the L-value for a specified position. A useful relationship employing the McIlwain L-parameter to estimate vertical cutoff rigidities has been derived for the twenty-five year period
Values-Driven Leadership Development: Where We Have Been and Where We Could Go
This essay revisits the premises upon which business ethics education has been based and then “flips” them, in an effort to help transform management education’s approach to valuesdriven leadership development. Previous assumptions about what we teach, who we teach, and how we teach ethics are described, and a summary of how the Giving Voice to Values (GVV) pedagogy/curriculum flips these assumptions is provided. A brief review of the impact to date of this experiment is included, along with reflection on some of the new opportunities and challenges GVV has begun to face as a result of the rapid take-up of this approach around the globe
The Universal Rotation Curve of Spiral Galaxies. II The Dark Matter Distribution out to the Virial Radius
In the current LambdaCDM cosmological scenario, N-body simulations provide us
with a Universal mass profile, and consequently a Universal equilibrium
circular velocity of the virialized objects, as galaxies. In this paper we
obtain, by combining kinematical data of their inner regions with global
observational properties, the Universal Rotation Curve (URC) of disk galaxies
and the corresponding mass distribution out to their virial radius. This curve
extends the results of Paper I, concerning the inner luminous regions of Sb-Im
spirals, out to the edge of the galaxy halos.Comment: In press on MNRAS. 10 pages, 8 figures. The Mathematica code for the
figures is available at: http://www.novicosmo.org/salucci.asp Corrected typo
Simplicity versus accuracy trade-off in estimating seismic fragility of existing reinforced concrete buildings
This paper investigates the trade-off between simplicity (modelling effort and computational time) and result accuracy in seismic fragility analysis of reinforced concrete (RC) frames. For many applications, simplified methods focusing on “archetype” structural models are often the state-of-practice. These simplified approaches may provide a rapid-yet-accurate estimation of seismic fragility, requiring a relatively small amount of input data and computational resources. However, such approaches often fail to capture specific structural deficiencies and/or failure mechanisms that might significantly affect the final assessment outcomes (e.g. shear failure in beam-column joints, in-plane and out-of-plane failure of infill walls, among others). To overcome these shortcomings, the alternative response analysis methods considered in this paper are all characterised by a mechanics-based approach and the explicit consideration of record-to-record variability in modelling seismic input/demands. Specifically, this paper compares three different seismic response analysis approaches, each characterised by a different refinement: 1) low refinement - non-linear static analysis (either analytical SLaMA or pushover analysis), coupled with the capacity spectrum method; 2) medium refinement - non-linear time-history analysis of equivalent single degree of freedom (SDoF) systems calibrated based on either the SLaMA-based or the pushover-based force-displacement curves; 3) high refinement - non-linear time-history analysis of multi-degree of freedom (MDoF) numerical models. In all cases, fragility curves are derived through a cloud-based approach employing unscaled real (i.e. recorded) ground motions. 14 four- or eight-storey RC frames showing different plastic mechanisms and distribution of the infills are analysed using each method. The results show that non-linear time-history analysis of equivalent SDoF systems is not substantially superior with respect to a non-linear static analysis coupled with the capacity spectrum method. The estimated median fragility (for different damage states) of the simplified methods generally falls within ±20% (generally as an under-estimation) of the corresponding estimates from the MDoF non-linear time-history analysis, with slightly-higher errors for the uniformly-infilled frames. In this latter cases, such error range increases up to ±32%. The fragility dispersion is generally over-estimated up to 30%. Although such bias levels are generally non-negligible, their rigorous characterisation can potentially guide an analyst to select/use a specific fragility derivation approach, depending on their needs and context, or to calibrate appropriate correction factors for the more simplified methods
- …