Generalized theory and application of Stokes parameter measurements made with a single photoelastic modulator

We report in this paper a generalized theory that describes the interaction between a monochromatic light beam and an optical system that includes one photoelastic modulator, one analyzer, and one photodetector. Based on the theory, a detailed four-step procedure is presented, which allows a precise measurement of the four Stokes parameters. An analysis of the systematic and random errors arising from the four-step measurements is also given as well as a calibration procedure that involves the use of a general retardation plate. As a practical application the procedure is used to analyze the magneto-optical properties of magnetic thin films grown on GaAs(001) substrates

Co-rich cobalt platinum nanowire arrays: effects of annealing

The effects of annealing on the crystal structure and magnetic properties of Co-rich cobalt platinum nanowire arrays embedded in anodic aluminium oxide membranes have been investigated. For this purpose, a rapid thermal annealing to temperatures of 300 °C to 800 °C has been used. Transmission electron microscopy and scanning electron microscopy show that the nanowires have a mean diameter of 14 nm and an estimated wire density of 7.8×1010 cm-2. From x-ray diffraction patterns, we find that the nanowires are hcp and possess a preferred texture in which the c axis of the grains tends to lie along the major axis of the wire. Vibrating sample magnetometry measurements indicate that the easy axis is along the nanowire axis direction. Hysteresis loops, saturation magnetization, squareness ratio (Mr/Ms), and coercivity (perpendicular and parallel to the nanowire axis) have all been investigated as a function of the annealing temperature (TA). Coercivity parallel to the wire axis first increases with TA, attains a maximum at 600 °C (which is 150% of the as-deposited sample), and then decreases. By contrast there is relatively little change in the coercivity measured perpendicular to the wires. The saturation magnetization for the as-deposited sample is 1360 emu/cc and remains almost constant for annealing temperatures up to 500 °C: for TA>500 °C it decreases significantly. The maximum (Mr/Ms) ratio attained in this study is 0.99, the highest value reported thus far for cobalt platinum alloy nanowires. The data suggest that these materials are potential candidates for high-density magnetic recording media

A global assessment of the impact of climate change on water scarcity

This paper presents a global scale assessment of the impact of climate change on water scarcity. Patterns of climate change from 21 Global Climate Models (GCMs) under four SRES scenarios are applied to a global hydrological model to estimate water resources across 1339 watersheds. The Water Crowding Index (WCI) and the Water Stress Index (WSI) are used to calculate exposure to increases and decreases in global water scarcity due to climate change. 1.6 (WCI) and 2.4 (WSI) billion people are estimated to be currently living within watersheds exposed to water scarcity. Using the WCI, by 2050 under the A1B scenario, 0.5 to 3.1 billion people are exposed to an increase in water scarcity due to climate change (range across 21 GCMs). This represents a higher upper-estimate than previous assessments because scenarios are constructed from a wider range of GCMs. A substantial proportion of the uncertainty in the global-scale effect of climate change on water scarcity is due to uncertainty in the estimates for South Asia and East Asia. Sensitivity to the WCI and WSI thresholds that define water scarcity can be comparable to the sensitivity to climate change pattern. More of the world will see an increase in exposure to water scarcity than a decrease due to climate change but this is not consistent across all climate change patterns. Additionally, investigation of the effects of a set of prescribed global mean temperature change scenarios show rapid increases in water scarcity due to climate change across many regions of the globe, up to 2°C, followed by stabilisation to 4°C

Ethanol production of semi-simultaneous saccharification and fermentation from mixture of cotton gin waste and recycled paper sludge

Ethanol production from the steam-exploded mixture of 75% cotton gin waste and 25% recycled paper sludge in various conditions was investigated by semi-simultaneous saccharification and fermentation (SSSF) consisting of a pre-hydrolysis and a simultaneous saccharification and fermentation (SSF). Four cases were studied: 24-h pre-hydrolysis + 48-h SSF (SSSF 24), 12-h pre-hydrolysis + 60-h SSF (SSSF 12), 72-h SSF, and 48-h hydrolysis + 24-h fermentation (SHF). The ethanol concentration, yield, and productivity of SSSF 24 were higher than those of the other operations. A model of SSF was used to simulate the data for four components in SSF. The analysis of the reaction rates of cellobiose, glucose, cell, and ethanol using the model and the parameters from the experiments showed that there was a transition point of the rate-controlling step at which the cell growth control in the initial 2 h was changed to the cellobiose reaction control in later period during ethanol production of SSF from the mixture

Fluid Particle Accelerations in Fully Developed Turbulence

The motion of fluid particles as they are pushed along erratic trajectories by fluctuating pressure gradients is fundamental to transport and mixing in turbulence. It is essential in cloud formation and atmospheric transport, processes in stirred chemical reactors and combustion systems, and in the industrial production of nanoparticles. The perspective of particle trajectories has been used successfully to describe mixing and transport in turbulence, but issues of fundamental importance remain unresolved. One such issue is the Heisenberg-Yaglom prediction of fluid particle accelerations, based on the 1941 scaling theory of Kolmogorov (K41). Here we report acceleration measurements using a detector adapted from high-energy physics to track particles in a laboratory water flow at Reynolds numbers up to 63,000. We find that universal K41 scaling of the acceleration variance is attained at high Reynolds numbers. Our data show strong intermittency---particles are observed with accelerations of up to 1,500 times the acceleration of gravity (40 times the root mean square value). Finally, we find that accelerations manifest the anisotropy of the large scale flow at all Reynolds numbers studied.Comment: 7 pages, 4 figure

Evaluation of Phage Display Discovered Peptides as Ligands for Prostate-Specific Membrane Antigen (PSMA)

The aim of this study was to identify potential ligands of PSMA suitable for further development as novel PSMA-targeted peptides using phage display technology. The human PSMA protein was immobilized as a target followed by incubation with a 15-mer phage display random peptide library. After one round of prescreening and two rounds of screening, high-stringency screening at the third round of panning was performed to identify the highest affinity binders. Phages which had a specific binding activity to PSMA in human prostate cancer cells were isolated and the DNA corresponding to the 15-mers were sequenced to provide three consensus sequences: GDHSPFT, SHFSVGS and EVPRLSLLAVFL as well as other sequences that did not display consensus. Two of the peptide sequences deduced from DNA sequencing of binding phages, SHSFSVGSGDHSPFT and GRFLTGGTGRLLRIS were labeled with 5-carboxyfluorescein and shown to bind and co-internalize with PSMA on human prostate cancer cells by fluorescence microscopy. The high stringency requirements yielded peptides with affinities KD∼1 μM or greater which are suitable starting points for affinity maturation. While these values were less than anticipated, the high stringency did yield peptide sequences that apparently bound to different surfaces on PSMA. These peptide sequences could be the basis for further development of peptides for prostate cancer tumor imaging and therapy. © 2013 Shen et al

Structural analysis and corrosion studies on an ISO 5832-9 biomedical alloy with TiO2 sol–gel layers

The aim of this study was to demonstrate the relationship between the structural and corrosion properties of an ISO 5832-9 biomedical alloy modified with titanium dioxide (TiO2) layers. These layers were obtained via the sol–gel method by acid-catalyzed hydrolysis of titanium isopropoxide in isopropanol solution. To obtain TiO2 layers with different structural properties, the coated samples were annealed at temperatures of 200, 300, 400, 450, 500, 600 and 800 C for 2 h. For all the prepared samples, accelerated corrosion measurements were performed in Tyrode’s physiological solution using electrochemical methods. The most important corrosion parameters were determined: corrosion potential, polarization resistance, corrosion rate, breakdown and repassivation potentials. Corrosion damage was analyzed using scanning electron microscopy. Structural analysis was carried out for selected TiO2 coatings annealed at 200, 400, 600 and 800 C. In addition, the morphology, chemical composition, crystallinity, thickness and density of the deposited TiO2 layers were determined using suitable electron and X-ray measurement methods. It was shown that the structure and character of interactions between substrate and deposited TiO2 layers depended on annealing temperature. All the obtained TiO2 coatings exhibit anticorrosion properties, but these properties are related to the crystalline structure and character of substrate–layer interaction. From the point of view of corrosion, the best TiO2 sol–gel coatings for stainless steel intended for biomedical applications seem to be those obtained at 400 C.This study was supported by Grant No. N N507 501339 of the National Science Centre. The authors wish to express their thanks to J. Borowski (MEDGAL, Poland) for the Rex 734 alloy

Impact of Microvascular Invasion on Clinical Outcomes After Curative-Intent Resection for Intrahepatic Cholangiocarcinoma

Background: Microvascular invasion (MiVI) is a histological feature of intrahepatic cholangiocarcinoma (ICC) that may be associated with biological behavior. We sought to investigate the impact of MiVI on long-term survival of patients undergoing curative-intent resection for ICC. Methods: A total of 1089 patients undergoing curative-intent resection for ICC were identified. Data on clinicopathological characteristics, disease-free survival (DFS), and overall survival (OS) were compared among patients with no vascular invasion (NoVI), MiVI, and macrovascular invasion (MaVI). Results: A total of 249 (22.9%) patients had MiVI, while 149 (13.7%) patients had MaVI (±MiVI). MiVI was associated with higher incidence of perineural, biliary and adjacent organ invasion, and satellite lesions (all P 18 months) prognosis. Conclusions: Roughly 1 out of 5 patients with resected ICC had MiVI. MiVI was associated with advanced tumor characteristics and a higher risk of tumor recurrence.info:eu-repo/semantics/publishedVersio

Biological diversification linked to environmental stabilization following the Sturtian Snowball glaciation

The body fossil and biomarker records hint at an increase in biotic complexity between the two Cryogenian Snowball Earth episodes (ca. 661 million to ≤650 million years ago). Oxygen and nutrient availability can promote biotic complexity, but nutrient (particularly phosphorus) and redox dynamics across this interval remain poorly understood. Here, we present high-resolution paleoredox and phosphorus phase association data from multiple globally distributed drill core records through the non-glacial interval. These data are first correlated regionally by litho- and chemostratigraphy, and then calibrated within a series of global chronostratigraphic frameworks. The combined data show that regional differences in postglacial redox stabilization were partly controlled by the intensity of phosphorus recycling from marine sediments. The apparent increase in biotic complexity followed a global transition to more stable and less reducing conditions in shallow to mid-depth marine environments and occurred within a tolerable climatic window during progressive cooling after post-Snowball super-greenhouse conditions