505 research outputs found
Distortion in a 7xxx aluminum alloy during liquid phase sintering
The distortion in a sintered 7xxx aluminum alloy, Al-7Zn-2.5Mg-1Cu (wt. pct), has been investigated by sintering three rectangular bars in each batch at 893 K (620 °C) for 0 to 40 minutes in nitrogen, followed by air or furnace cooling. They were placed parallel to each other, equally spaced apart at 2 mm, with their long axes being perpendicular to the incoming nitrogen flow. Pore evolution in each sample during isothermal sintering was examined metallographically. The compositional changes across sample mid-cross section and surface layers were analyzed using energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy depth profiling, respectively. The two outer samples bent toward the middle one, while the middle sample was essentially distortion free after sintering. The distortion in the outer samples was a result of differential shrinkage between their outer and inner surfaces during isothermal sintering. The porous outer surface showed an enrichment of oxygen around the large pores as well as lower magnesium and zinc contents than the interior and inner surface of the same sample, while the inner surface was distinguished by the presence of AlN. The differential shrinkage was caused by different oxygen contents in local sintering atmosphere and unbalanced loss of magnesium and zinc between the outer and inner surfaces
The effects of sample position and gas flow pattern on the sintering of a 7xxx aluminum alloy
The effects of sample position and gas flow pattern on the sintering of a 7xxx aluminum alloy Al-7Zn-2.5Mg-1Cu in flowing nitrogen have been investigated both experimentally and numerically. The near-surface pore distribution and sintered density of the samples show a strong dependency on the sample separation distance over the range from 2 mm to 40 mm. The open porosity in each sample increases with increasing separation distance while the closed porosity remains essentially unchanged. A two-dimensional computational fluid dynamics (CFD) model has been developed to analyze the gas flow behavior near the sample surfaces during isothermal sintering. The streamlines, velocity profile, and volume flow rate in the cavity between each two samples are presented as a function of the sample separation distance at a fixed nitrogen flow rate of 6 L/min. The CFD modeling results provide essential details for understanding the near-surface pore distribution and density of the sintered samples. It is proposed that the different gas flow patterns near the sample surfaces result in variations of the oxygen content from the incoming nitrogen flow in the local sintering atmosphere, which affects the self-gettering process of the aluminum compacts during sintering. This leads to the development of different near-surface pore distributions and sintered densities
Quantum theta functions and Gabor frames for modulation spaces
Representations of the celebrated Heisenberg commutation relations in quantum
mechanics and their exponentiated versions form the starting point for a number
of basic constructions, both in mathematics and mathematical physics (geometric
quantization, quantum tori, classical and quantum theta functions) and signal
analysis (Gabor analysis).
In this paper we try to bridge the two communities, represented by the two
co--authors: that of noncommutative geometry and that of signal analysis. After
providing a brief comparative dictionary of the two languages, we will show
e.g. that the Janssen representation of Gabor frames with generalized Gaussians
as Gabor atoms yields in a natural way quantum theta functions, and that the
Rieffel scalar product and associativity relations underlie both the functional
equations for quantum thetas and the Fundamental Identity of Gabor analysis.Comment: 38 pages, typos corrected, MSC class change
Charge order and low frequency spin dynamics in lanthanum cuprates revealed by Nuclear Magnetic Resonance
We report detailed 17O, 139La, and 63Cu Nuclear Magnetic Resonance (NMR) and
Nuclear Quadrupole Resonance (NQR) measurements in a stripe ordered
La1.875Ba0.125CuO4 single crystal and in oriented powder samples of
La1.8-xEu0.2SrxCuO4. We observe a partial wipeout of the 17O NMR intensity and
a simultaneous drop of the 17O electric field gradient (EFG) at low
temperatures where the spin stripe order sets in. In contrast, the 63Cu
intensity is completely wiped out at the same temperature. The drop of the 17O
quadrupole frequency is compatible with a charge stripe order. The 17O spin
lattice relaxation rate shows a peak similar to that of the 139La, which is of
magnetic origin. This peak is doping dependent and is maximal at x ~ 1/8.Comment: submitted to European Physical Journal Special Topic
Plasmonic excitations in noble metals: The case of Ag
The delicate interplay between plasmonic excitations and interband
transitions in noble metals is described by means of {\it ab initio}
calculations and a simple model in which the conduction electron plasmon is
coupled to the continuum of electron-hole pairs. Band structure effects,
specially the energy at which the excitation of the -like bands takes place,
determine the existence of a subthreshold plasmonic mode, which manifests
itself in Ag as a sharp resonance at 3.8 eV. However, such a resonance is not
observed in the other noble metals. Here, this different behavior is also
analyzed and an explanation is provided.Comment: 9 pages, 8 figure
New Insights into White-Light Flare Emission from Radiative-Hydrodynamic Modeling of a Chromospheric Condensation
(abridged) The heating mechanism at high densities during M dwarf flares is
poorly understood. Spectra of M dwarf flares in the optical and
near-ultraviolet wavelength regimes have revealed three continuum components
during the impulsive phase: 1) an energetically dominant blackbody component
with a color temperature of T 10,000 K in the blue-optical, 2) a smaller
amount of Balmer continuum emission in the near-ultraviolet at lambda 3646
Angstroms and 3) an apparent pseudo-continuum of blended high-order Balmer
lines. These properties are not reproduced by models that employ a typical
"solar-type" flare heating level in nonthermal electrons, and therefore our
understanding of these spectra is limited to a phenomenological interpretation.
We present a new 1D radiative-hydrodynamic model of an M dwarf flare from
precipitating nonthermal electrons with a large energy flux of erg
cm s. The simulation produces bright continuum emission from a
dense, hot chromospheric condensation. For the first time, the observed color
temperature and Balmer jump ratio are produced self-consistently in a
radiative-hydrodynamic flare model. We find that a T 10,000 K
blackbody-like continuum component and a small Balmer jump ratio result from
optically thick Balmer and Paschen recombination radiation, and thus the
properties of the flux spectrum are caused by blue light escaping over a larger
physical depth range compared to red and near-ultraviolet light. To model the
near-ultraviolet pseudo-continuum previously attributed to overlapping Balmer
lines, we include the extra Balmer continuum opacity from Landau-Zener
transitions that result from merged, high order energy levels of hydrogen in a
dense, partially ionized atmosphere. This reveals a new diagnostic of ambient
charge density in the densest regions of the atmosphere that are heated during
dMe and solar flares.Comment: 50 pages, 2 tables, 13 figures. Accepted for publication in the Solar
Physics Topical Issue, "Solar and Stellar Flares". Version 2 (June 22, 2015):
updated to include comments by Guest Editor. The final publication is
available at Springer via http://dx.doi.org/10.1007/s11207-015-0708-
Dynamical properties of liquid Al near melting. An orbital-free molecular dynamics study
The static and dynamic structure of liquid Al is studied using the orbital
free ab-initio molecular dynamics method. Two thermodynamic states along the
coexistence line are considered, namely T = 943 K and 1323 K for which X-ray
and neutron scattering data are available. A new kinetic energy functional,
which fulfills a number of physically relevant conditions is employed, along
with a local first principles pseudopotential. In addition to a comparison with
experiment, we also compare our ab-initio results with those obtained from
conventional molecular dynamics simulations using effective interionic pair
potentials derived from second order pseudopotential perturbation theory.Comment: 15 pages, 12 figures, 2 tables, submitted to PR
Towards evidence-based marketing: The case of childhood obesity
Contentious commodities such as tobacco, alcohol and fatty foods are bringing marketing under scrutiny from consumers and policymakers. Yet there is little agreement on whether marketing is harmful to society. Systematic review (SR), a methodology derived from clinical medicine, offers marketers a tool for providing resolution and allowing policymakers to proceed with greater confidence. This article describes how SR methods were applied for the first time to a marketing problem -- the effects of food promotion to children. The review withstood scrutiny and its findings were formally ratified by government bodies and policymakers, demonstrating that SR methods can transfer from clinical research to marketing
The and Decays Revisited
The rare and decays are calculated
in different schemes, which are seen to be essentially equivalent to and
produce the same results as conventional Vector-Meson Dominance. We obtain the
theoretical predictions
and in agreement
with recent experimental data.Comment: 10 pages, LATEX (revised version for recent experimental data
Machine-learning based patient classification using Hepatitis B virus full-length genome quasispecies from Asian and European cohorts
Chronic infection with Hepatitis B virus (HBV) is a major risk factor for the development of advanced liver disease including fibrosis, cirrhosis, and hepatocellular carcinoma (HCC). The relative contribution of virological factors to disease progression has not been fully defined and tools aiding the deconvolution of complex patient virus profiles is an unmet clinical need. Vari
- …