Nanoindentation of Soft Films on Hard Substrates:The Importance of Pile-Up

Nanoindentation is used for measuring mechanical properties of thin films. This paper addresses potential measurement errors caused by pile-up when soft films deposited on hard substrates are tested this way. Pile-up is exacerbated in soft film/hard substrate systems because of the constraint the substrate exerts on plastic deformation of the film. To examine pile-up effects, Al films 240 and 1700 nm thick were deposited on hard glass and tested by standard nanoindentation. In Al/glass, the film and substrate have similar elastic moduli; thus, any unusual behavior in nanoindentation results may be attributed to differences in plastic flow alone. SEM examination of nanoindentation hardness impressions in the film revealed that common methods for analyzing nanoindentation data underestimate the true contact areas by as much as 80%, which results in overestimations of the hardness and modulus by as much as 80 and 35%, respectively. Sources of these errors and their effect on measurement of hardness and elastic modulus are discussed, and a simple model for the composite hardness of the film/substrate system is developed. This model could prove useful when it is not possible to make indentations shallow enough to avoid substrate effects

Eff ect of a congregation-based intervention on uptake of HIV testing and linkage to care in pregnant women in Nigeria (Baby Shower): a cluster randomised trial

Background Few eff ective community-based interventions exist to increase HIV testing and uptake of antiretroviral therapy (ART) in pregnant women in hard-to-reach resource-limited settings. We assessed whether delivery of an intervention through churches, the Healthy Beginning Initiative, would increase uptake of HIV testing in pregnant women compared with standard health facility referral. Methods In this cluster randomised trial, we enrolled self-identifi ed pregnant women aged 18 years and older who attended churches in southeast Nigeria. We randomised churches (clusters) to intervention or control groups, stratifi ed by mean annual number of infant baptisms (<80 vs ≥80). The Healthy Beginning Initiative intervention included health education and on-site laboratory testing implemented during baby showers in intervention group churches, whereas participants in control group churches were referred to health facilities as standard. Participants and investigators were aware of church allocation. The primary outcome was confi rmed HIV testing. This trial is registered with ClinicalTrials.gov, identifi er number NCT 01795261. Findings Between Jan 20, 2013, and Aug 31, 2014, we enrolled 3002 participants at 40 churches (20 per group). 1309 (79%) of 1647 women attended antenatal care in the intervention group compared with 1080 (80%) of 1355 in the control group. 1514 women (92%) in the intervention group had an HIV test compared with 740 (55%) controls (adjusted odds ratio 11·2, 95% CI 8·77–14·25; p<0·0001). Interpretation Culturally adapted, community-based programmes such as the Healthy Beginning Initiative can be eff ective in increasing HIV screening in pregnant women in resource-limited settings

Clubbing masculinities: Gender shifts in gay men's dance floor choreographies

This is an Author's Accepted Manuscript of an article published in Journal of Homosexuality, 58(5), 608-625, 2011 [copyright Taylor & Francis], available online at: http://www.tandfonline.com/10.1080/00918369.2011.563660This article adopts an interdisciplinary approach to understanding the intersections of gender, sexuality, and dance. It examines the expressions of sexuality among gay males through culturally popular forms of club dancing. Drawing on political and musical history, I outline an account of how gay men's gendered choreographies changed throughout the 1970s, 80s, and 90s. Through a notion of “technologies of the body,” I situate these developments in relation to cultural levels of homophobia, exploring how masculine expressions are entangled with and regulated by musical structures. My driving hypothesis is that as perceptions of cultural homophobia decrease, popular choreographies of gay men's dance have become more feminine in expression. Exploring this idea in the context of the first decade of the new millennium, I present a case study of TigerHeat, one of the largest weekly gay dance club events in the United States

Fourier Analysis of Correlated Monte Carlo Importance Sampling

International audienceFourier analysis is gaining popularity in image synthesis, as a tool for the analysis of error in Monte Carlo (MC) integration. Still, existing tools are only able to analyze convergence under simplifying assumptions (such as randomized shifts) which are not applied in practice during rendering. We reformulate the expressions for bias and variance of sampling-based integrators to unify non-uniform sample distributions (importance sampling) as well as correlations between samples while respecting finite sampling domains. Our unified formulation hints at fundamental limitations of Fourier-based tools in performing variance analysis for MC integration. This non-trivial exercise also provides exciting insight into the effects of importance sampling on the convergence rate of estimators because of the introduction or removal of discontinuities. Specifically, we demonstrate that the convergence of multiple importance sampling (MIS) is determined by the strategy that converges slowest. We propose two simple and practical approaches to limit the impact of discontinuities on the convergence rate of estimators: The first one involves mirroring the integrand to cancel out the effect of boundary discontinuities. This is followed by two novel mirror sampling techniques for MC estimation in this mirrored domain. The second approach improves direct illumination light sampling by smoothing out discontinuities within the domain at the cost of introducing a small amount of bias. Our approaches are simple, practical and can be easily incorporated in production renderers

Photochemistry of Furyl- and Thienyldiazomethanes: Spectroscopic Characterization of Triplet 3-Thienylcarbene

Photolysis (λ \u3e 543 nm) of 3-thienyldiazomethane (1), matrix isolated in Ar or N2 at 10 K, yields triplet 3-thienylcarbene (13) and α-thial-methylenecyclopropene (9). Carbene 13 was characterized by IR, UV/vis, and EPR spectroscopy. The conformational isomers of 3-thienylcarbene (s-E and s-Z) exhibit an unusually large difference in zero-field splitting parameters in the triplet EPR spectrum (|D/hc| = 0.508 cm–1, |E/hc| = 0.0554 cm–1; |D/hc| = 0.579 cm–1, |E/hc| = 0.0315 cm–1). Natural Bond Orbital (NBO) calculations reveal substantially differing spin densities in the 3-thienyl ring at the positions adjacent to the carbene center, which is one factor contributing to the large difference in D values. NBO calculations also reveal a stabilizing interaction between the sp orbital of the carbene carbon in the s-Z rotamer of 13 and the antibonding σ orbital between sulfur and the neighboring carbon—an interaction that is not observed in the s-E rotamer of 13. In contrast to the EPR spectra, the electronic absorption spectra of the rotamers of triplet 3-thienylcarbene (13) are indistinguishable under our experimental conditions. The carbene exhibits a weak electronic absorption in the visible spectrum (λmax = 467 nm) that is characteristic of triplet arylcarbenes. Although studies of 2-thienyldiazomethane (2), 3-furyldiazomethane (3), or 2-furyldiazomethane (4) provided further insight into the photochemical interconversions among C5H4S or C5H4O isomers, these studies did not lead to the spectroscopic detection of the corresponding triplet carbenes (2-thienylcarbene (11), 3-furylcarbene (23), or 2-furylcarbene (22), respectively)

A new view of electrochemistry at highly oriented pyrolytic graphite

Major new insights on electrochemical processes at graphite electrodes are reported, following extensive investigations of two of the most studied redox couples, Fe(CN)64–/3– and Ru(NH3)63+/2+. Experiments have been carried out on five different grades of highly oriented pyrolytic graphite (HOPG) that vary in step-edge height and surface coverage. Significantly, the same electrochemical characteristic is observed on all surfaces, independent of surface quality: initial cyclic voltammetry (CV) is close to reversible on freshly cleaved surfaces (>400 measurements for Fe(CN)64–/3– and >100 for Ru(NH3)63+/2+), in marked contrast to previous studies that have found very slow electron transfer (ET) kinetics, with an interpretation that ET only occurs at step edges. Significantly, high spatial resolution electrochemical imaging with scanning electrochemical cell microscopy, on the highest quality mechanically cleaved HOPG, demonstrates definitively that the pristine basal surface supports fast ET, and that ET is not confined to step edges. However, the history of the HOPG surface strongly influences the electrochemical behavior. Thus, Fe(CN)64–/3– shows markedly diminished ET kinetics with either extended exposure of the HOPG surface to the ambient environment or repeated CV measurements. In situ atomic force microscopy (AFM) reveals that the deterioration in apparent ET kinetics is coupled with the deposition of material on the HOPG electrode, while conducting-AFM highlights that, after cleaving, the local surface conductivity of HOPG deteriorates significantly with time. These observations and new insights are not only important for graphite, but have significant implications for electrochemistry at related carbon materials such as graphene and carbon nanotubes

Materials characterisation part II: tip geometry of the Vickers indenter for microindentation tests

This is the second of two papers by the authors associated with materials characterisation methods based on hardness testing. It is important to have knowledge of the tip geometry of the indenter employed in the hardness test as this affects the correctness of the value of contact area parameter used to determine the mechanical properties. In this paper, outcomes of a study concerned with the tip geometry of the Vickers microindenter are presented. Results from experiment are compared with results from published works and the most current accepted analytical models. A new non-contact methodology based on a residual imprint imaging process is developed and further compared with other methods using experimental and numerical analyses over a wide range of material properties. For confirmation, an assessment was undertaken using numerical dimensional analysis which permitted a large range of materials to be explored. It is shown that the proposed method is more accurate compared with other methods regardless of the mechanical properties of the material. The outcomes demonstrate that measuring contact area with the new method enhanced the overall relative error in the resulting mechanical properties including hardness and Young’s modulus of elasticity. It is also shown that the value of the contact area using actual indenter geometry obtained from experimental load-displacement analysis or FEM numerical analysis is more accurate than the value obtained from the assumption of perfect indenter geometry and hence can be used for materials with low strain hardening property. © 2017 Springer-Verlag Londo

Nanoindentation and nanoscratching of hard coating materials for magnetic disks

Nanoindentation and nanoscratching experiments have been performed to assess the mechanical and tribological behavior of three thin film materials with potential application as wear resistant coatings for magnetic disk storage: (1) hydrogenated-carbon (CHx); (2) nitrogenated-carbon (CNx); and (3) boron suboxide (BOx). The hardness and elastic modulus were measured using nanoindentation. Ultra-low load nanoscratching tests were performed to assess the relative scratch resistance of the films and measure their friction coefficients. The mechanical and tribological performance of the three materials are discussed and compared

Structure of a Classical MHC Class I Molecule That Binds “Non-Classical” Ligands

The chicken MHC YF1*7.1 X-ray structures reveal that this protein binds lipids and thus represents a "hybrid" class I complex with features of classical as well as non-classical MHC molecules