826 research outputs found
Asymptotic Reduction of a Lithium-ion Pouch Cell Model
A three-dimensional model of a single-layer lithium-ion pouch cell is
presented which couples conventional porous electrode theory describing cell
electrochemical behaviour with an energy balance describing cell thermal
behaviour. Asymptotic analysis of the model is carried out by exploiting the
small aspect ratio typical of pouch cell designs. The analysis reveals the
scaling that results in a distinguished limit, and highlights the role played
by the electrical conductivities of the current collectors. The resulting model
comprises a collection of one-dimensional models for the through-cell
electrochemical behaviour which are coupled via two-dimensional problems for
the Ohmic and thermal behaviour in the planar current collectors. A further
limit is identified which reduces the problem to a single volume-averaged
through-cell model, greatly reducing the computational complexity. Numerical
simulations are presented which illustrate and validate the asymptotic results.Comment: 27 pages, 6 figures, submitted to SIAM Journal on Applied Mathematics
(08/05/2020
A Suite of Reduced-Order Models of a Single-Layer Lithium-ion Pouch Cell
For many practical applications, fully coupled three-dimensional models
describing the behaviour of lithium-ion pouch cells are too computationally
expensive. However, owing to the small aspect ratio of typical pouch cell
designs, such models are well approximated by splitting the problem into a
model for through-cell behaviour and a model for the transverse behaviour. In
this paper, we combine different simplifications to through-cell and transverse
models to develop a hierarchy of reduced-order pouch cell models. We give a
critical numerical comparison of each of these models in both isothermal and
thermal settings, and also study their performance on realistic drive cycle
data. Finally, we make recommendations regarding model selection, taking into
account the available computational resource and the quantities of interest in
a particular study
Impulse control disorders in Parkinson's disease: decreased striatal dopamine transporter levels
Objective Impulse control disorders are commonly associated with dopaminergic therapy in Parkinson's disease (PD). PD patients with impulse control disorders demonstrate enhanced dopamine release to conditioned cues and a gambling task on [11C]raclopride positron emission tomography (PET) imaging and enhanced ventral striatal activity to reward on functional MRI. We compared PD patients with impulse control disorders and age-matched and gender-matched controls without impulse control disorders using [123I]FP-CIT (2β-carbomethoxy-3β-(4-iodophenyl)tropane) single photon emission computed tomography (SPECT), to assess striatal dopamine transporter (DAT) density.
Methods The [123I]FP-CIT binding data in the striatum were compared between 15 PD patients with and 15 without impulse control disorders using independent t tests.
Results Those with impulse control disorders showed significantly lower DAT binding in the right striatum with a trend in the left (right: F(1,24)=5.93, p=0.02; left: F(1,24)=3.75, p=0.07) compared to controls.
Conclusions Our findings suggest that greater dopaminergic striatal activity in PD patients with impulse control disorders may be partly related to decreased uptake and clearance of dopamine from the synaptic cleft. Whether these findings are related to state or trait effects is not known. These findings dovetail with reports of lower DAT levels secondary to the effects of methamphetamine and alcohol. Although any regulation of DAT by antiparkinsonian medication appears to be modest, PD patients with impulse control disorders may be differentially sensitive to regulatory mechanisms of DAT expression by dopaminergic medications
Lithium-ion battery degradation: how to model it
Predicting lithium-ion battery degradation is worth billions to the global automotive, aviation and energy storage industries, to improve performance and safety and reduce warranty liabilities. However, very few published models of battery degradation explicitly consider the interactions between more than two degradation mechanisms, and none do so within a single electrode. In this paper, the first published attempt to directly couple more than two degradation mechanisms in the negative electrode is reported. The results are used to map different pathways through the complicated path dependent and non-linear degradation space. Four degradation mechanisms are coupled in PyBaMM, an open source modelling environment uniquely developed to allow new physics to be implemented and explored quickly and easily. Crucially it is possible to see 'inside' the model and observe the consequences of the different patterns of degradation, such as loss of lithium inventory and loss of active material. For the same cell, five different pathways that can result in end-of-life have already been found, depending on how the cell is used. Such information would enable a product designer to either extend life or predict life based upon the usage pattern. However, parameterization of the degradation models remains as a major challenge, and requires the attention of the international battery community
Applications of Direct Injection Soft Chemical Ionisation-Mass Spectrometry for the Detection of Pre-blast Smokeless Powder Organic Additives
Analysis of smokeless powders is of interest from forensics and security perspectives. This article reports the detection of smokeless powder organic additives (in their pre-detonation condition), namely the stabiliser diphenylamine and its derivatives 2-nitrodiphenylamine and 4-nitrodiphenylamine, and the additives (used both as stabilisers and plasticisers) methyl centralite and ethyl centralite, by means of swab sampling followed by thermal desorption and direct injection soft chemical ionisation-mass spectrometry. Investigations on the product ions resulting from the reactions of the reagent ions H3O+ and O2+ with additives as a function of reduced electric field are reported. The method was comprehensively evaluated in terms of linearity, sensitivity and precision. For H3O+, the limits of detection (LoD) are in the range of 41-88 pg of additive, for which the accuracy varied between 1.5 and 3.2%, precision varied between 3.7 and 7.3% and linearity showed R20.9991. For O2+, LoD are in the range of 72 to 1.4 ng, with an accuracy of between 2.8 and 4.9% and a precision between 4.5 and 8.6% and R20.9914. The validated methodology was applied to the analysis of commercial pre-blast gun powders from different manufacturers.(VLID)4826148Accepted versio
Randomly Evolving Idiotypic Networks: Structural Properties and Architecture
We consider a minimalistic dynamic model of the idiotypic network of
B-lymphocytes. A network node represents a population of B-lymphocytes of the
same specificity (idiotype), which is encoded by a bitstring. The links of the
network connect nodes with complementary and nearly complementary bitstrings,
allowing for a few mismatches. A node is occupied if a lymphocyte clone of the
corresponding idiotype exists, otherwise it is empty. There is a continuous
influx of new B-lymphocytes of random idiotype from the bone marrow.
B-lymphocytes are stimulated by cross-linking their receptors with
complementary structures. If there are too many complementary structures,
steric hindrance prevents cross-linking. Stimulated cells proliferate and
secrete antibodies of the same idiotype as their receptors, unstimulated
lymphocytes die.
Depending on few parameters, the autonomous system evolves randomly towards
patterns of highly organized architecture, where the nodes can be classified
into groups according to their statistical properties. We observe and describe
analytically the building principles of these patterns, which allow to
calculate number and size of the node groups and the number of links between
them. The architecture of all patterns observed so far in simulations can be
explained this way. A tool for real-time pattern identification is proposed.Comment: 19 pages, 15 figures, 4 table
ROCK GLACIER MONITORING USING AERIAL PHOTOGRAPHS: CONVENTIONAL VS. UAV-BASED MAPPING – A COMPARATIVE STUDY
Rock glaciers are creep phenomena of mountain permafrost. Typically, these landforms look like lava flows from a bird’s eye view. Active rock glaciers move downslope with flow velocities in the range of few centimeters to several meters per year. Thus, large masses of rock and ice can be gradually transported down-valley. In this paper we present a comparative study analyzing surface change for Tschadinhorn rock glacier, a relatively fast moving rock glacier located in the Hohe Tauern Range of the Austrian Alps. Aerial photographs (1954–2017) of both metric (conventional) and non-metric (UAV-based) aerial surveys were compared to derive multi-annual to annual flow vector fields and surface height change. For each time interval given we computed a single representative value for flow velocity and, if applicable, also for area-wide surface height change, i.e. volume change. The velocity graph obtained represents the temporal evolution of the kinematics of the rock glacier with good discrimination. Volume change was difficult to quantify since temporal changes were rather small and close to insignificance. The precision and accuracy of the results obtained were numerically quantified. Our study showed that for the Tschadinhorn rock glacier UAV-based aerial surveys can substitute conventional aerial surveys as carried out by national mapping agencies, such as the Austrian Federal Office of Metrology and Surveying (BEV). Thus, UAV-based aerial surveys can help to bridge the data gap between regular aerial surveys. The high accuracy of the UAV-derived results would even allow intra-annual change detection of flow velocity
Selective Reagent Ion Mass Spectrometric Investigations of the Nitroanilines
This paper presents an investigation of proton and charge transfer reactions to 2-, 3- and 4-nitroanilines (C6H6N2O2) involving the reagent ions H3O+·(H2O)n (n=0, 1 and 2) and O2+, respectively, as a function of reduced electric field (60-240 Td), using Selective Reagent Ion-Time-of-Flight-Mass Spectrometry (SRI-ToF-MS). To aid in the interpretation of the H3O+·(H2O)n experimental data, the proton affinities and gas-phase basicities for the three nitroaniline isomers have been determined using density functional theory. These calculations show that proton transfer from both the H3O+ and H3O+·H2O reagent ions to the nitroanilines will be exoergic and hence efficient, with the reactions proceeding at the collisional rate. For proton transfer from H3O+ to the NO2 sites, the exoergicities are 171 kJ mol-1 (1.8 eV), 147 kJ mol-1 (1.5 eV) and 194 kJ mol-1 (2.0 eV) for 2-, 3- and 4-nitroanilines, respectively. Electron transfer from all three of the nitroanilines is also significantly exothermic by approximately 4 eV. Although a substantial transfer of energy occurs during the ion/molecule reactions, the processes are found to predominantly proceed via non-dissociative pathways over a large reduced electric field range. Only at relatively high reduced electric fields (>180 Td) is dissociative proton and charge transfer observed. Differences in fragment product ions and their intensities provide a means to distinguish the isomers, with proton transfer distinguishing 2-nitroaniline (2-NA) from 3- and 4-NA, and charge transfer distinguishing 4-NA from 2- and 3-NA, thereby providing a means to enhance selectivity using SRI-ToF-MS.(VLID)4826158Version of recor
Randomly Evolving Idiotypic Networks: Modular Mean Field Theory
We develop a modular mean field theory for a minimalistic model of the
idiotypic network. The model comprises the random influx of new idiotypes and a
deterministic selection. It describes the evolution of the idiotypic network
towards complex modular architectures, the building principles of which are
known. The nodes of the network can be classified into groups of nodes, the
modules, which share statistical properties. Each node experiences only the
mean influence of the groups to which it is linked. Given the size of the
groups and linking between them the statistical properties such as mean
occupation, mean life time, and mean number of occupied neighbors are
calculated for a variety of patterns and compared with simulations. For a
pattern which consists of pairs of occupied nodes correlations are taken into
account.Comment: 14 pages, 8 figures, 4 table
- …