1,170 research outputs found
Distributed Electro-Mechanical Coupling Effects in a Dielectric Elastomer Membrane Array
Background Dielectric elastomer (DE) transducers permit to efectively develop large-deformation, energy-efcient, and
compliant mechatronic devices. By arranging many DE elements in an array-like confguration, a soft actuator/sensor system capable of cooperative features can be obtained. When many DE elements are densely packed onto a common elastic
membrane, spatial coupling efects introduce electro-mechanical interactions among neighbors, which strongly afect the
system actuation and sensing performance. To efectively design cooperative DE systems, those coupling efects must be
systematically characterized and understood frst.
Objective As a frst step towards the development of complex cooperative DE systems, in this work we present a systematic characterization of the spatial electro-mechanical interactions in a 1-by-3 array of silicone DEs. More specifcally, we
investigate how the force and capacitance characteristics of each DE in the array change when its neighbors are subject to
diferent types of mechanical or electrical loads. Force and capacitance are chosen for this investigation, since those quantities are directly tied to the DE actuation and sensing behaviors, respectively.
Methods An electro-mechanical characterization procedure is implemented through a novel experimental setup, which is
specifcally developed for testing soft DE arrays. The setup allows to investigate how the force and capacitance characteristics
of each DE are afected by static deformations and/or electrical voltages applied to its nearby elements. Diferent combinations of electro-mechanical loads and DE neighbors are considered in an extensive experimental campaign.
Results The conducted investigation shows the existence of strong electro-mechanical coupling efects among the diferent
array elements. The interaction intensity depends on multiple parameters, such as the distance between active DEs or the
amount of deformation/voltage applied to the neighbors, and provides essential information for the design of array actuators. In some cases, such coupling efects may lead to changes in force up to 9% compared to the reference confguration.
A further coupling is also observed in the DE capacitive response, and opens up the possibility of implementing advanced
and/or distributed self-sensing strategies in future applications.
Conclusion By means of the conducted experiments, we clearly show that the actuation and sensing characteristics of each
DE in the array are strongly infuenced by the electro-mechanical loading state of its neighbors. The coupling efects may
signifcantly afect the overall cooperative system performance, if not properly accounted for during the design. In future
works, the obtained results will allow developing cooperative DE systems which are robust to, and possibly take advantage
of, such spatial coupling efects
Interoperability and FAIRness through a novel combination of Web technologies
Data in the life sciences are extremely diverse and are stored in a broad spectrum of repositories ranging from those designed for particular data types (such as KEGG for pathway data or UniProt for protein data) to those that are general-purpose (such as FigShare, Zenodo, Dataverse or EUDAT). These data have widely different levels of sensitivity and security considerations. For example, clinical observations about genetic mutations in patients are highly sensitive, while observations of species diversity are generally not. The lack of uniformity in data models from one repository to another, and in the richness and availability of metadata descriptions, makes integration and analysis of these data a manual, time-consuming task with no scalability. Here we explore a set of resource-oriented Web design patterns for data discovery, accessibility, transformation, and integration that can be implemented by any general- or special-purpose repository as a means to assist users in finding and reusing their data holdings. We show that by using off-the-shelf technologies, interoperability can be achieved atthe level of an individual spreadsheet cell. We note that the behaviours of this architecture compare favourably to the desiderata defined by the FAIR Data Principles, and can therefore represent an exemplar implementation of those principles. The proposed interoperability design patterns may be used to improve discovery and integration of both new and legacy data, maximizing the utility of all scholarly outputs
Fully Dynamic Maintenance of Arc-Flags in Road Networks
International audienceThe problem of finding best routes in road networks can be solved by applying Dijkstra's shortest paths algorithm. Unfortunately, road networks deriving from real-world applications are huge yielding unsustainable times to compute shortest paths. For this reason, great research efforts have been done to accelerate Dijkstra's algorithm on road networks. These efforts have led to the development of a number of speed-up techniques, as for example Arc-Flags, whose aim is to compute additional data in a preprocessing phase in order to accelerate the shortest paths queries in an on-line phase. The main drawback of most of these techniques is that they do not work well in dynamic scenarios. In this paper we propose a new algorithm to update the Arc-Flags of a graph subject to edge weight decrease operations. To check the practical performances of the new algorithm we experimentally analyze it, along with a previously known algorithm for edge weight increase operations, on real-world road networks subject to fully dynamic sequences of operations. Our experiments show a significant speed-up in the updating phase of the Arc-Flags, at the cost of a small space and time overhead in the preprocessing phase
Optimized dispersion of nanoparticles for biological in vitro and in vivo studies
Background: The aim of this study was to establish and validate a practical method to disperse nanoparticles in physiological solutions for biological in vitro and in vivo studies. Results: TiO(2) (rutile) dispersions were prepared in distilled water, PBS, or RPMI 1640 cell culture medium. Different ultrasound energies, various dispersion stabilizers (human, bovine, and mouse serum albumin, Tween 80, and mouse serum), various concentrations of stabilizers, and different sequences of preparation steps were applied. The size distribution of dispersed nanoparticles was analyzed by dynamic light scattering and zeta potential was measured using phase analysis light scattering. Nanoparticle size was also verified by transmission electron microscopy. A specific ultrasound energy of 4.2 x 10(5) kJ/m(3) was sufficient to disaggregate TiO(2) (rutile) nanoparticles, whereas higher energy input did not further improve size reduction. The optimal sequence was first to sonicate the nanoparticles in water, then to add dispersion stabilizers, and finally to add buffered salt solution to the dispersion. The formation of coarse TiO(2) (rutile) agglomerates in PBS or RPMI was prevented by addition of 1.5 mg/ml of human, bovine or mouse serum albumin, or mouse serum. The required concentration of albumin to stabilize the nanoparticle dispersion depended on the concentration of the nanoparticles in the dispersion. TiO(2) (rutile) particle dispersions at a concentration lower than 0.2 mg/ml could be stabilized by the addition of 1.5 mg/ml albumin. TiO(2) (rutile) particle dispersions prepared by this method were stable for up to at least 1 week. This method was suitable for preparing dispersions without coarse agglomerates (average diameter < 290 nm) from nanosized TiO(2) (rutile), ZnO, Ag, SiO(x), SWNT, MWNT, and diesel SRM2975 particulate matter. Conclusion: The optimized dispersion method presented here appears to be effective and practicable for preparing dispersions of nanoparticles in physiological solutions without creating coarse agglomerates
Sonoluminescing air bubbles rectify argon
The dynamics of single bubble sonoluminescence (SBSL) strongly depends on the
percentage of inert gas within the bubble. We propose a theory for this
dependence, based on a combination of principles from sonochemistry and
hydrodynamic stability. The nitrogen and oxygen dissociation and subsequent
reaction to water soluble gases implies that strongly forced air bubbles
eventually consist of pure argon. Thus it is the partial argon (or any other
inert gas) pressure which is relevant for stability. The theory provides
quantitative explanations for many aspects of SBSL.Comment: 4 page
The Hardware of the ATLAS Pixel Detector Control System
The innermost part of the ATLAS (A Toroidal LHC ApparatuS) experiment will be a pixel detector, built of 1744 individual detector modules. To operate the modules, readout electronics, and other detector components, a complex power supply and control system is necessary. The specific powering and control requirements are described, along with the custom made components of our power supply and control systems. These include remotely programmable Regulator Stations, the power supply system for the optical transceivers, several monitoring units and the Interlock System
FAIR digital twins for data-intensive research
Although all the technical components supporting fully orchestrated Digital Twins (DT) currently exist, what remains missing is a conceptual clarification and analysis of a more generalized concept of a DT that is made FAIR, that is, universally machine actionable. This methodological overview is a first step toward this clarification. We present a review of previously developed semantic artifacts and how they may be used to compose a higher-order data model referred to here as a FAIR Digital Twin (FDT). We propose an architectural design to compose, store and reuse FDTs supporting data intensive research, with emphasis on privacy by design and their use in GDPR compliant open science.Analytical BioScience
Economic damages from on-going climate change imply deeper near-term emission cuts
Pathways toward limiting global warming to well below 2 ∘C, as used by the IPCC in the Fifth Assessment Report, do not consider the climate impacts already occurring below 2 ∘C. Here we show that accounting for such damages significantly increases the near-term ambition of transformation pathways. We use econometric estimates of climate damages on GDP growth and explicitly model the uncertainty in the persistence time of damages. The Integrated Assessment Model we use includes the climate system and mitigation technology detail required to derive near-term policies. We find an optimal carbon price of $115 per tonne of CO2 in 2030. The long-term persistence of damages, while highly uncertain, is a main driver of the near-term carbon price. Accounting for damages on economic growth increases the gap between the currently pledged nationally determined contributions and the welfare-optimal 2030 emissions by two thirds, compared to pathways considering the 2 ∘C limit only
Do Natural Proteins Differ from Random Sequences Polypeptides? Natural vs. Random Proteins Classification Using an Evolutionary Neural Network
Are extant proteins the exquisite result of natural selection or are they random sequences slightly edited by evolution? This question has puzzled biochemists for long time and several groups have addressed this issue comparing natural protein sequences to completely random ones coming to contradicting conclusions. Previous works in literature focused on the analysis of primary structure in an attempt to identify possible signature of evolutionary editing. Conversely, in this work we compare a set of 762 natural proteins with an average length of 70 amino acids and an equal number of completely random ones of comparable length on the basis of their structural features. We use an ad hoc Evolutionary Neural Network Algorithm (ENNA) in order to assess whether and to what extent natural proteins are edited from random polypeptides employing 11 different structure-related variables (i.e. net charge, volume, surface area, coil, alpha helix, beta sheet, percentage of coil, percentage of alpha helix, percentage of beta sheet, percentage of secondary structure and surface hydrophobicity). The ENNA algorithm is capable to correctly distinguish natural proteins from random ones with an accuracy of 94.36%. Furthermore, we study the structural features of 32 random polypeptides misclassified as natural ones to unveil any structural similarity to natural proteins. Results show that random proteins misclassified by the ENNA algorithm exhibit a significant fold similarity to portions or subdomains of extant proteins at atomic resolution. Altogether, our results suggest that natural proteins are significantly edited from random polypeptides and evolutionary editing can be readily detected analyzing structural features. Furthermore, we also show that the ENNA, employing simple structural descriptors, can predict whether a protein chain is natural or random
- …