Life Cycle Assessment di un Playground: Climbing Structure CS06

L’oggetto del presente studio LCA è una struttura per parchi gioco (playground CS06), costituita da tronchi circolari irregolari e concepita per integrarsi sia in ambienti naturali che in aree urbane. Lo studio nasce dalla volontà dell’azienda produttrice del gioco, Richter Spielgeräte GmbH, di analizzare in termini di prestazioni ambientali il proprio prodotto CS06, anche in considerazione del fatto che è principalmente costituito da legno, che può essere riconosciuto come un materiale maggiormente sostenibile rispetto ad altri impiegati normalmente nel medesimo settore (plastica, acciaio, cemento). La valutazione degli effetti ambientali legati al ciclo di vita di un prodotto principalmente costituito da legname (Larix decidua), come il playground in oggetto, potrebbe ricondurre a un impatto globale dell’oggetto trascurabile; tuttavia, esistono degli impatti latenti che vengono alla luce dopo un’attenta analisi che solo l’approccio del Life Cycle Assessment è in grado di far emergere. L’analisi della Climbing Structure CS06 è stata diretta a esaminare tutti i principali effetti sull’ambiente e sulla salute in maniera da coprire tutte le fasi del ciclo di vita: per molte delle fasi principali erano disponibili dati primari, il che permette di considerare la valutazione effettuata con un buon livello di affidabilità. La prospettiva dello studio è dalla culla alla tomba

Environmental and health-related external costs of meat consumption in Italy: estimations and recommendations through life cycle assessment

The literature on the external costs of food consumption is limited. This study aims at advancing in this field by translating the environmental and health-related impacts generated by the life-cycle of meat into external costs via monetization. The main types of meat consumed in Italy are used as a case study. The potential external costs are estimated via attributional life cycle assessment (LCA), using: i) the ReCiPe method for the environmental impact assessment (fourteen impact categories), ii) the population attributional fractions for the health damage from meat ingestion, and iii) the CE Delft environmental prices for monetization. Results show that processed pork and beef generate the highest costs on society, with an external cost of approximately 2€ per 100 g. Fresh pork and poultry follow, with a cost of 1€ and 0.5€ per 100 g, respectively. For comparison, the potential external costs of legumes (i.e., a plant-based alternative to meat) are estimated to be from eight to twenty times lower than meat (around 0.05€ per 100 g of legumes). In 2018, meat consumed in Italy potentially generated a cost on society of 36.6 bn€. The burden arises almost equally from impacts generated before meat ingestion (mainly associated with the emissions arisen from farming), and after the ingestion (due to diseases potentially associated with meat consumption). A sensitivity analysis on the main parameters revealed a large uncertainty on the final yearly cost, ranging from 19 to 93 bn€. Although more research is needed to improve the accuracy and the validity of the models used in the study (e.g., human health impact assessment, monetization) and to include potential external costs currently unaccounted for (e.g., water use, animal welfare, occupational health), results show unequivocal significant costs associated with meat consumption. We thus advocate for policies aimed at reducing these costs and allocating them properly

Impact of palliative care in evaluating and relieving symptoms in patients with advanced cancer. Results from the demetra study

Background: Cancer patients experience multiple symptoms throughout the course of the disease. We aimed to provide a comprehensive analysis of the symptom burden in patients with advanced cancer at admission to specialist palliative care (PC) services and seven days later to estimate the immediate impact of PC intervention. Patient and methods: The analysis was based on an observational, prospective, multicenter study (named DEMETRA) conducted in Italy on new patients accessing network specialist PC centers during the period May 2017–November 2017. The prevalence and intensity of symptoms were assessed at baseline and after seven days using three tools including the Edmonton Symptom Assessment System (ESAS). Results: Five PC centers recruited 865 cancer patients. Thirty-three different symptoms were observed at the baseline, the most frequent being asthenia (84.9%) and poor well-being (71%). The intensity of the most frequent symptoms according to ESAS ranged from 5.5 for asthenia to 3.9 for nausea. The presence and intensity of physical symptoms increased with increasing levels of anxiety and depression. After seven days, prevalence of nausea and breathlessness as well as intensity of almost all symptoms significantly decreased. Conclusions: The study confirmed the considerable symptom burden of patients with advanced cancer. PC intervention has significantly reduced the severity of symptoms, despite the patients’ advanced disease and short survival

LCA Towards Sustainable Agriculture: The Case Study of Cupuaçu Jam from Agroforestry

Abstract Appropriate design of agricultural systems for the regeneration of deforested lands in critical areas, like the Amazon, may be an effective action to restore forest ecosystem functions and to mitigate biodiversity loss and climate change. Among the possible strategies, agroforestry may represent a viable trade-off between economic and environmental aspects. In this study, the production of a jam made of fruits from agroforestry was analysed from a Life Cycle Assessment (LCA) perspective. The agroforestry system investigated was implemented in a reforested area of the Peruvian Amazon. A cradle-to-grave approach, from the cultivation phase to the end-of-life of the jam, was adopted. Additionally to LCA, the focus is on the agricultural phase and, in particular, on the comparison of alternative agro-ecosystems from an environmental viewpoint. Therefore, LCA indicators are integrated with biodiversity indicators to account for the ecological dimension. Preliminary results highlight the benefits of producing jam from fruits harvested in an area of the Amazon reforested via agroforestry, as well as the high variability of environmental impacts due to the differences in the alternative agricultural systems considered

Process integration study of tail-end Ca-Looping process for CO2capture in cement plants

In this work, the integration of Calcium looping (CaL) process into a cement plant for post-combustion CO2capture is assessed via process simulations. In the proposed scheme, the carbonator of the CaL process is used as an end-of-pipe unit to capture the CO2from the cement kiln gas. From the results obtained, it is demonstrated that CO2capture efficiencies of the order of 90% are achievable, with CaL reactors operating in conditions not far from those demonstrated for application in power plants. The integration of the tail-end CaL process results in a significant increase of the total fuel consumption (about two to three times higher) compared to the benchmark cement plant without CO2capture. On the other hand, the heat from the CaL process can be recovered by a steam cycle producing decarbonized electric power that may exceed the needs of the plant auxiliaries (including the ASU and the CO2compression and purification unit), exporting in this way electricity to the grid and so resulting in CO2emission credits from a life cycle perspective. The resulting specific primary energy consumption for CO2avoided (SPECCA) highly depends on the reference power generation technology considered, and it ranges between 2.7 and 3.7 MJLHV/kgCO2in a coal-fired power generation scenario. As for the retrofittability of existing cement plants, the operation of the suspension preheating tower after the implementation of the CaL unit, as well as the position of the CaL carbonator with respect to the raw mill, have been assessed. Based on the results obtained, no critical issues have been found from a technical point of view in the adoption of the tail-end CaL process in existing cement kilns

Clinical care conditions and needs of palliative care patients from five italian regions: Preliminary data of the demetra project

In order to plan the right palliative care for patients and their families, it is essential to have detailed information about patients’ needs. To gain insight into these needs, we analyzed five Italian local palliative care networks and assessed the clinical care conditions of patients facing the complexities of advanced and chronic disease. A longitudinal, observational, noninterventional study was carried out in five Italian regions from May 2017 to November 2018. Patients who accessed the palliative care networks were monitored for 12 months. Sociodemographic, clinical, and symptom information was collected with several tools, including the Necesidades Paliativas CCOMS-ICO (NECPAL) tool, the Edmonton Symptom Assessment System (ESAS), and interRAI Palliative Care (interRAI-PC). There were 1013 patients in the study. The majority (51.7%) were recruited at home palliative care units. Cancer was the most frequent diagnosis (85.4%), and most patients had at least one comorbidity (58.8%). Cancer patients reported emotional stress with severe symptoms (38.7% vs. 24.3% in noncancer patients; p = 0.001) and were less likely to have clinical frailty (13.3% vs. 43.9%; p < 0.001). Our study confirms that many patients face the last few months of life with comorbidities or extreme frailty. This study contributes to increasing the general knowledge on palliative care needs in a high-income country

Quartz Crystal Microbalances for Space: Design and Testing of a 3D Printed Quasi-Kinematic Support

Outgassing or thruster’s generated contaminants are critical for optical surfaces and optical payloads because scientific measurements and, in general, the performances can be degraded or jeopardized by uncontrolled contamination. This is a well-known issue in space technology that is demonstrated by the growing usage of quartz crystal microbalances as a solution for measuring material outgassing properties data and characterizing the on-orbit contamination environment. Operation in space requires compatibility with critical requirements, especially the mechanical and thermal environments to be faced throughout the mission. This work provides the design of a holding structure based on 3D printing technology conceived to meet the environmental characteristics of space application, and in particular, to face harsh mechanical and thermal environments. A kinematic mounting has been conceived to grant compatibility with a large temperature range, and it has been designed by finite element methods to overcome loading during the launch phases and cope with a temperature working range down to cryogenic temperatures. Qualification in such environments has been performed on a mockup by testing a prototype of the holding assembly between −110 °C and 110 °C and allowing verification of the mechanical resistance and stability of the electrical contacts for the embedded heater and sensor in that temperature range. Moreover, mechanical testing in a random environment characterized by an RMS acceleration level of 500 m/s2 and excitation frequency from 20 to 2000 Hz was successfully performed. The testing activity allowed for validation of the proposed design and opened the road to the possible implementation of the proposed design for future flight opportunities, also onboard micro or nanosatellites. Moreover, exploiting the manufacturing technology, the proposed design can implement an easy assembling and mounting of the holding system. At the same time, 3D printing provides a cost-effective solution even for small series production for ground applications, like monitoring the contaminants in thermo-vacuum chambers or clean rooms, or depositions chambers

LCA Towards Sustainable Agriculture: The Case Study of Cupuaçu Jam from Agroforestry

Appropriate design of agricultural systems for the regeneration of deforested lands in critical areas, like the Amazon, may be an effective action to restore forest ecosystem functions and to mitigate biodiversity loss and climate change. Among the possible strategies, agroforestry may represent a viable trade-off between economic and environmental aspects. In this study, the production of a jam made of fruits from agroforestry was analysed from a Life Cycle Assessment (LCA) perspective. The agroforestry system investigated was implemented in a reforested area of the Peruvian Amazon. A cradle-to-grave approach, from the cultivation phase to the end-of-life of the jam, was adopted. Additionally to LCA, the focus is on the agricultural phase and, in particular, on the comparison of alternative agro-ecosystems from an environmental viewpoint. Therefore, LCA indicators are integrated with biodiversity indicators to account for the ecological dimension. Preliminary results highlight the benefits of producing jam from fruits harvested in an area of the Amazon reforested via agroforestry, as well as the high variability of environmental impacts due to the differences in the alternative agricultural systems considered

Epidemiology and genotyping of Candida rugosa strains responsible for persistent intramammary infections in dairy cows

The present study was undertaken during an outbreak of clinical and subclinical mastitis in 14 dairy cows caused by Candida rugosa, in which high somatic cell counts were seen and cases did not respond to antibiotic treatment. Intramammary infection cured spontaneously in 10 cows, whereas 4 cows were culled as a result of persistent infections. Repeated sampling of these cows and biomolecular analysis of the isolates showed that the infections were caused by the same genotype, even over a period of 2 lactations. Random amplification of the genome of C. rugosa milk isolates gave 3 different DNA banding patterns (genotypes G1, G2, and G3). Viable cells of C. rugosa were also isolated from various environmental sources and were present in high concentrations in total mixed ration samples, which could be considered the primary source of diffusion of viable yeast cells in the environment, as demonstrated by genotyping. The proven capacity of these microorganisms to survive in the environment of the cow, such as the total mixed ration, bedding, water, and cow skin, and to cause persistent intramammary infections highlights the importance of mycotic spread in dairy herds

Global meat consumption trends and local deforestation in Madre de Dios: assessing land use changes and other environmental impacts

AbstractMeat consumption is becoming one of the most relevant sectors in terms of environmental impacts globally. In the Brazilian Amazon the effects of this process are seen in the ongoing deforestation and land-use change (about 65% of deforestation can be linked to cattle ranching). One of the main causes of this trend is the increased efficiency of the transport infrastructure: along both sides of the Brazilian Inter-Oceanic highway, about 50km of rainforest have been converted to cattle ranching. In 2011 the Inter-Oceanic highway was finalized also on the Peruvian side: the region of Madre de Dios is neighboring the Brazilian Amazon, therefore the risk is that this area will undergo the same kind of development.The objective of this analysis is to highlight the contribution of global meat demand trend as cause of land use change and deforestation in the Madre de Dios region. This focus has been chosen since, nowadays, the magnitude of cattle ranching activities is hidden by more evident and damaging activities (e.g., gold mining), and its near-future effects risk to be underestimated. By starting with investigating the preliminary signals of cattle ranching contribution to the local deforestation process, this analysis will serve as basis for more comprehensive future works on local data, including monitoring campaigns of local biodiversity and GHG emissions. Land-use change is, thus, analyzed through FAO data and also through data acquired with remote sensing carried out within other projects. Meat consumption and production outcomes are obtained from the FAOSTAT database. By integrating trends in the regional meat consumption with the emerging trading effects, which are incremented by the new highway, it is possible to highlight the risk that the global convergence in meat consumption trends can locally influence the deforestation in Madre de Dios