53 research outputs found
Recommended from our members
Crevice Repassivation Potentials for Alloy 22 in Simulated Concentrated Ground Waters
The resistance of Alloy 22 (N06022) to localized corrosion, mainly crevice corrosion, has been extensively investigated in the last few years. However, the behavior of Alloy 22 in concentrated aqueous solutions that may simulate concentrated ground waters was not fully understood. Systematic electrochemical tests using cyclic potentiodynamic polarization as well as the Tsujikawa-Hisamatsu electrochemical method were performed to determine the crevice corrosion susceptibility of Alloy 22 in simulated concentrated water (SCW), simulated acidified water (SAW) and basic saturated water (BSW). Results show that Alloy 22 is immune to crevice corrosion in SCW and SAW but may suffer crevice corrosion initiation in BSW. Results also show that in a naturally aerated environment, the corrosion potential would never reach the critical potential for crevice corrosion initiation
Fatty Acids in the Meat of Buffaloes Supplemented with Fish Oil
The purpose of this study has been to investigate the influence of both a supplementary fish oil diet on conjugated linoleic acid (CLA) and n6 and n3 fatty acids on intramuscular fat in Mediterranean buffalo meat. Twenty animals were randomly divided into two groups and fed with Brachiaria brizantha, 3Kg rice bran, 500 g corn and 500 g sunflower pellets for 60 days. Group I received this diet only while in group II each animal received additional 100 ml fish oil daily. Results indicated a significant decrease of palmitic fatty acid in group II (232.67 mg/g fat) in relation to group I (254.73 mg/g fat). Among unsaturated acids (AGI), the 9c 11t CLA value of group II (21.23 mg/g fat) showed an increase in relation to group I (15.80 mg/g fat), while the linoleic acid content of group II (28,85 mg/g fat) decreased significantly in relation to group I (47,00 mg/g fat). However, the alpha linolenic acid showed no significant difference between the supplemented diet group and the control group (10.31 and 10.70 mg/g fat, respectively). Group II n6/n3 ratio was narrower (2.69:1) than that of group I (4.55:1). Summing up, group II diet, which included fish oil, increased the CLA content in intramuscular fat and decreased the n6 fatty acids, improving the n6/n3 ratio
Recommended from our members
Repassivation Potential of Alloy 22 in Sodium and Calcium Chloride Brines
A comprehensive matrix of 60 tests was designed to explore the effect of calcium chloride vs. sodium chloride and the ratio R of nitrate concentration over chloride concentration on the repassivation potential of Alloy 22. Tests were conducted using the cyclic potentiodynamic polarization (CPP) technique at 75 C and at 90 C. Results show that at a ratio R of 0.18 and higher nitrate was able to inhibit the crevice corrosion in Alloy 22 induced by chloride. Current results fail to show in a consistent way a different effect on the repassivation potential of Alloy 22 for calcium chloride solutions than for sodium chloride solutions
Recommended from our members
DEGRADATION MODES OF ALLOY 22 IN YUCCA MOUNTAIN REPOSITORY CONDITIONS
The nuclear waste package design for Yucca Mountain (Nevada, USA), in its current configuration, consists of a double wall cylindrical container fabricated using a highly corrosion resistant Ni-based Alloy 22 for the outer barrier and type 316 stainless steel for the inner structural vessel. A mailbox-shaped drip shield fabricated primarily using Ti Grade 7 will cover the waste packages. The environmental degradation of the relevant materials have been extensively studied and modeled for over ten years. This paper reviews the state-of-the-art understanding of the degradation modes of Alloy 22 (N06022) due to its interaction with the predicted in-drift mountain conditions including temperature and types of electrolytes. Subjects discussed include thermal aging and phase stability, dry oxidation, general and localized corrosion, stress corrosion cracking and hydrogen induced cracking
Recommended from our members
Crevice Repassivation Potential of Alloy 22 in High-Nitrate Dust Deliquescence Type Environments
The nitrate ion (NO{sub 3}{sup -}) is an inhibitor for crevice corrosion of Alloy 22 (N06022) in chloride (Cl{sup -}) aqueous solutions. Naturally formed electrolytes may contain both chloride and nitrate ions. The higher the ratio R = [NO{sub 3}{sup -}]/[Cl{sup -}] in the solution the stronger the inhibition of crevice corrosion. Atmospheric desert dust contains both chloride and nitrate salts, generally based on sodium (Na{sup +}) and potassium (K{sup +}). Some of these salts may deliquescence at relatively low humidity at temperatures on the order of 150 C and higher. The resulting deliquescent brines are highly concentrated and especially rich in nitrate. Electrochemical tests have been performed to explore the anodic behavior of Alloy 22 in high chloride high nitrate electrolytes at temperatures as high as 150 C at ambient atmospheres. Naturally formed brines at temperatures higher than 120 C do not induce crevice corrosion in Alloy 22 because they contain high levels of nitrate. The inhibitive effect of nitrate on crevice corrosion is still active for temperatures higher than 100 C
Influence of Black Annealing Oxide Scale on the Anodic Behavior of Alloy 22
The resistance of Alloy 22 (N06022) to localized corrosion, mainly crevice corrosion, has been extensively investigated in the last few years. The effect of influencing variables such as temperature, applied potential, chloride concentration and nitrate inhibitor concentration have been addressed previously. At this time, it was important to address the effect an oxide film or scale that forms during the high temperature annealing process or solution heat treatment (SHT) and its subsequent water quenching. Electrochemical tests such as cyclic potentiodynamic polarization (CPP) have been carried out to determine the repassivation potential for localized corrosion and to assess the mode of attack on the specimens. Tests have been carried out in parallel using mill annealed (MA) specimens free from oxide on the surface. The comparative testing was carried out in six different electrolyte solutions at temperatures ranging from 60 to 100 C. Results show that the repassivation potential of the specimens containing the black anneal oxide film on the surface was practically the same as the repassivation potential for oxide-free specimens
Recommended from our members
Corrosion Rate of Alloy 22 as a Function of Immersion Time
Alloy 22 (N06022) is a nickel (Ni) based alloy containing nominally 22% Chromium (Cr), 13% Molybdenum (Mo) and 3% tungsten (W). Alloy 22 is highly resistant to general and localized corrosion such as pitting corrosion and stress corrosion cracking. Due to the formation of a stable passive film, when Alloy 22 is immersed in certain electrolytes, its corrosion potential (E{sub corr}) increases and its corrosion rate (CR) decreases as a function of the immersion time. This paper discusses the evolution of E{sub corr} and corrosion rate (CR) of creviced Alloy 22 specimens in six different mixtures of sodium chloride (NaCl) and potassium nitrate (KNO{sub 3}) at 100 C. Two types of specimens were used, polished as-welded (ASW) and as-welded solution plus heat-treated (ASW+SHT). The latter contained the black annealing oxide film on the surface. Results show that, for the two type of materials, as the immersion time increases, E{sub corr} increased and the CR decreased. Even for concentrated brine solutions at 100 C the CR was < 50 nm/year after more than 100 days immersion
Recommended from our members
Electrochemical Testing of Gas Tungsten Arc Welded and Reduced Pressure Electron Beam Welded Alloy 22
Alloy 22 (N06022) is the material selected for the fabrication of the outer shell of the nuclear waste containers for the Yucca Mountain high-level nuclear waste repository site. A key technical issue in the waste package program has been the integrity of the container weld joints. The currently selected welding process for fabricating and sealing the containers is the traditional gas tungsten arc welding (GTAW) or TIG method. An appealing faster alternative technique is reduced pressure electron beam (RPEB) welding. It was of interest to compare the corrosion properties of specimens prepared using both types of welding techniques. Standard electrochemical tests were carried on GTAW and RPEB welds as well as on base metal (non-welded) to determine their relative corrosion behavior in simulated concentrated water (SCW) at 90 C (alkaline), 1 M HCl at 60 C (acidic) and 1 M NaCl at 90 C (neutral) solutions. Results show that for all practical purposes, the three tested materials had the same electrochemical behavior in the three tested electrolytes
Recommended from our members
General Corrosion and Passive Film Stability
This report summarizes both general corrosion of Alloy 22 from 60 to 220 C and the stability of the passive (oxide) film from 60 to 90 C over a range of solution compositions that are relevant to the in-drift chemical environment at the waste package surface. The general corrosion rates were determined by weight-loss measurements in a range of complex solution compositions representing the products of both the evaporation of seepage water and also the deliquescence of dust previously deposited on the waste canisters. These data represent the first weight-loss measurements performed by the program at temperatures above 90 C. The low corrosion rates of Alloy 22 are attributed to the protective oxide film that forms at the metal surface. In this report, changes in the oxide film composition are correlated with weight loss at the higher temperatures (140-220 C) where film characterization had not been previously performed. The stability of the oxide film was further analyzed by conducting a series of electrochemical tests in progressively more acidic solutions to measure the general corrosion rates in solutions that mimic crevice or pit environments
Recommended from our members
Effect of Organic Acid Additions on the General and Localized Corrosion Susceptibility of Alloy 22 in Chloride Solutions
Electrochemical studies such as cyclic potentiodynamic polarization (CPP) and electrochemical impedance spectroscopy (EIS) were performed to determine the corrosion behavior of Alloy 22 (N06022) in 1M NaCl solutions at various pH values from acidic to neutral at 90 C. All the tested material was wrought Mill Annealed (MA). Tests were also performed in NaCl solutions containing weak organic acids such as oxalic, acetic, citric and picric. Results show that the corrosion rate of Alloy 22 was significantly higher in solutions containing oxalic acid than in solutions of pure NaCl at the same pH. Citric and picric acids showed a slightly higher corrosion rate, and acetic acid maintained the corrosion rate of pure chloride solutions at the same pH. Organic acids revealed to be weak inhibitors for crevice corrosion. Higher concentration ratios, compared to nitrate ions, were needed to completely inhibit crevice corrosion in chloride solutions. Results are discussed considering acid dissociation constants, buffer capacity and complex formation constants of the different weak acids
- …