Porous polyethylene and proplast

A comparative animal study showed that, after implantation in skull defects in guinea pigs, porous high-density polyethylene (PHDPE) was substantially better anchored in the bone than Proplast, and had greater stability of form and structure. In Proplast, ingrowth of fibrous tissue caused partial structural dilatation and fragmentation, which could limit its suitability for use in reconstructive surgery

The Alps Paleoelevation and Paleoclimate Experiment (APE): Neogene Paleoelevation and Paleoclimate of the Central Alps

Stable isotope paleoaltimetry takes advantage of the relationship between orogen elevation and the stable isotope ratios in meteoric water, which are ultimately recorded in geological archives like foreland basins or orogen-internal shear zones. The δ-δ approach relies on contrasting time-equivalent δ18O and δD records from high- and low-elevation sites to constrain the height of the orogen at the time these geologic archives were formed. However, at the same time, different boundary conditions such as changing paleogeography, atmospheric CO2 concentrations or sea surface temperatures result in complex paleoclimate model outputs, which predict significant changes in the isotopic composition of meteoric water. These changes may be recorded in geological archives and thus complicate the reconstruction of past elevations. The 4DMB Phase 1 project APE aimed at generating a first quantitative estimate for the paleoclimatic signal in Alpine stable isotope records, so that these records may be corrected for and ultimately yield more accurate paleoelevation estimates. We addressed this challenge by integrating isotope-tracking climate model (ECHAM5-wiso) simulations with stable isotope and clumped isotope data from the foreland basin and high-elevation regions of the central Alps. ECHAM5-wiso simulations have been conducted with 1) boundary conditions based on paleogeographic reconstructions of the Last Glacial Maximum (LGM) and the mid-Pliocene (PLIO), and 2) different topographic scenarios for the Alps. The simulations show that modifying environmental conditions can produce similar magnitudes of δ18O change as changes in alpine topography. For example, the climatically induced δ18O changes in the PLIO and LGM experiments correspond to the magnitude of changes created by setting the entire orogen to 50% and 150% of its modern height, respectively (Botsyun et al., 2020). Our modelling results stress the need for the paleoaltimetry community to correct isotopic signals in geologic archives for climate-induced changes in isotope ratios. Pedogenic carbonate proxy data from alluvial megafans of the Swiss Molasse Basin revealed that 1) low-elevation, distal δ18O values are higher than previously assumed and thus, more adequately reflect low-elevation δ18O values required for paleoelevation estimates; 2) Mid-Miocene megafans had considerable topography and an internal elevation gradient; 3) clumped isotope-derived carbonate formation temperatures yield low-elevation paleoclimate estimates and help to embed δ18O data into global climate models. Under consideration of previous work and our modelling results, we conclude that the Central Alps, more specifically the region surrounding the Simplon Fault Zone, attained surface elevations of >4000 m no later than the mid-Miocene (Krsnik et al., 2021). In summary, our approach represents an important methodological advance that allows the disentangling of climatic and surface uplift signals in the geologic stable isotope record. Furthermore, new insights into the Alps elevation history can help to constrain the timing of slab inversion and/or break-off in the Western/Central Alps

Synergistic effects of diachronous surface uplift and global climate change on the isotopic composition of meteoric waters: implications on paleoelevation estimates across the European Alps

Stable isotope paleoaltimetry is widely used to infer past elevations of orogens due to the robust systematic inverse relationships between elevation and oxygen (δ18O) and hydrogen (δD) isotopic composition of meteoric waters recorded in geologic archives, such as paleosol carbonates or hydrous silicates. This δ18O-elevation relationship (or isotopic lapse rate) is commonly attributed to the preferential rainout of heavy water isotopologues from air masses ascending over topography. However, numerous non-linear climatic processes, such as surface recycling, vapor mixing, variability in moisture source, and precipitation dynamics, can also influence the isotopic lapse rate and thus complicate stable isotope paleoaltimetry estimates. This highlights the need for a better quantitative understanding of topographic and regional climatic effects on the isotopic composition of ancient waters. Through topographic sensitivity experiments, Boateng et al. (2023) suggested plausible changes in isotopic lapse rates across the Alps in response to different diachronous surface uplift scenarios and validated that the expected isotopic signal difference due to elevation changes is significant enough to be reflected in geologic archives. Recent paleoelevation reconstructions across the Alps estimate the mean elevation of >4000 m in the Central Alps during the Middle Miocene (Krsnik et al., 2021). These high elevation estimates have been attributed to the complicated transition from pre- to mid-Miocene Central Alps with a diverse landscape and a complex topography, mainly driven by the rapid exhumation of deep-seated core complexes, followed by a rearrangement of the drainage system. However, the paleoelevation estimate is based on the assumptions that the isotopic lapse rate (1) is similar to the modern lapse rate (~2.0 ‰/km), which is lower than the global average, (2) did not change during the deposition of the paleoaltimetry proxies compared to the present day, and (3) remained constant across the entire Alps. Here, we use a high-resolution isotope-tracking ECHAM5-wiso General Circulation Model to simulate the Middle Miocene climate and δ18Op responses to different surface uplift scenarios of the Alps. More specifically, we performed topographic sensitivity experiments by varying the height of the Western/Central Alps and Eastern Alps under two atmospheric CO2 concentration scenarios for Middle Miocene paleoenvironmental conditions. The simulated δ18Op values are consistent with the proxy reconstructions across the low- and high-elevation sites in the Alps. The topographic scenarios indicated δ18Op values differences of up to -10 ‰ between the low- and high-elevation sites, primarily due to changes in orographic precipitation and local near-surface temperature. Even though the differences across the low-elevation sites showed minor changes compared to the present-day climate, the high-elevation sites indicated significant changes mainly due to differences in moisture transport and moisture redistribution. These changes resulted in different isotopic lapse rates across the different transects around the Alps, contradicting the assumption of a regionally similar isotopic lapse rate. Using the simulated Middle Miocene isotopic lapse rates with the reconstructed Δδ18Op signal between the low-elevation Northern Alpine Foreland Basin and high-elevation Simplon fault gouge reveals an overestimation of paleoelevation estimates by 2 km when compared to the constant isotopic lapse rate of -2.0 ‰/km across the Alps. These uncertainty estimates are an improvement of the previous paleoelevation reconstruction across the Alps and support the integration of paleoaltimetry and paleoclimate modelling to reconstruct past surface elevations accurately

The Alps Paleoelevation and Paleoclimate Experiment: Reconstructing Eastward Propagation of Surface Uplift in the ALps (REAL)

Geological observations, geodynamic models, and seismic studies suggest Neogene eastward propagating surface uplift of the European Alps. Whereas 4DMB Phase I project APE focused on reconstructing surface uplift of the Central Alps, 4DMB Phase II project REAL aims at testing the predicted west-to-east surface uplift of the Alps by combining stable isotope paleoaltimetry and paleoclimate modeling. Stable isotope paleoaltimetry is based on the inverse relationship between elevation and the stable isotopic composition of meteoric water and provides a tool to reconstruct the elevation of mountain belts in the geological past. First, REAL explores applications of the δ-δ method (see Poster Phase I APE), which requires that various recorders of past rainfall are available in the rock record: soil carbonates from low-elevation (foreland) basins and hydrous minerals from high-elevation fault gouges/shear zones. Paleoelevation estimates are obtained by contrasting time-equivalent low- and high-elevation proxy data sets, provided that the isotopic composition of the fluids during mineral formation is estimated accurately. Whereas formation temperatures of fault gouge minerals (such as illite and syntectonic micas) can be readily estimated, we apply clumped isotope paleothermometry to provide robust estimates of meteoric water δ18O from the low-elevation foreland basin carbonate record. Second, meteoric water δ18O values are not only sensitive to local elevation, but also to the complex climatic changes resulting from different paleoenvironmental boundary conditions and regional topographic configuration. To isolate the contribution of each of these components δ-δ stable isotope paleoaltimetry is applied in combination with ECHAM5-wiso paleoclimate simulations for a number of topographic scenarios of diachronous surface uplift. This unique combination allows for the removal of climate change effects on the stable isotope data, and therefore improves the accuracy of paleoelevation reconstructions. Results from our ongoing Phase II project (spring 2021 - spring 2024): 1. Reveal that diachronous surface uplift would produce patterns of climate, δ18O in precipitation values, and isotopic lapse rates that are distinctly different from those of today and those produced by bulk surface uplift scenarios. Importantly, this signal would be detectable in stable isotope paleoaltimetry results (Boateng et al., in revision). 2. Present a Miocene (23–13 Ma) continental paleotemperature record from the northern Mediterranean region (Digne-Valensole basin, SE France), which indicates near-constant temperatures from 23.0-18.8 Ma, followed by a highly variable and warm climate during the Middle Miocene and rapid cooling after 14 Ma (Ballian et al., 2023). 3. Together with new and existing paleotemperature records, preliminary results of the δ-δ method show for the first time that (a) the Central Alps were already high during the Early Miocene and (b) the Eastern Alps were appreciably lower than the Central Alps during the Middle Miocene (Ballian et al., 2022)

The effects of diachronous surface uplift of the European Alps on regional climate and the oxygen isotopic composition of precipitation

The European Alps are hypothesized to have experienced diachronous surface uplift in response to post-collisional processes such as, e.g., slab break-off. Therefore, understanding the geodynamic and geomorphic evolution of the Alps requires knowledge of its surface uplift history. This study presents the simulated response of regional climate and oxygen isotopic composition of precipitation (&delta;18Op) to different along-strike topographic evolution scenarios. These responses are modeled to determine if diachronous surface uplift in the Western and Eastern Alps would produce &delta;18Op signals in the geologic record that are sufficiently large and distinct for stable isotope paleoaltimetry. This is tested with a series of sensitivity experiments conducted with the water isotope tracking atmospheric General Circulation Model (GCM) ECHAM5-wiso. The topographic scenarios are created from the variation of two free parameters, (1) the elevation of the West-Central Alps and (2) the elevation of the Eastern Alps. Results suggest significant changes in the spatial patterns of &delta;18Op, the elevation-dependent rate of change in &delta;18Op (&ldquo;isotopic lapse rate&rdquo;), near-surface temperatures, precipitation amounts, and atmospheric circulation patterns in response to the different scenarios. The predictions for the diachronous surface uplift experiments are distinctly different from simulations forced with present-day topography and for simulations where the entire Alps experience synchronous surface uplift. Topographic scenarios with higher elevations in the West-Central Alps produce higher magnitude changes and an expansion of the affected geographical domain surrounding the Alps when compared to present-day topography. Furthermore, differences in &delta;18Op values of up to &minus;2 to &minus;8 &permil; are predicted along the strike of the Alps for the diachronous uplift scenarios, suggesting that the signal can be preserved and measured in geologic archives. Lastly, the results highlight the importance of sampling far-field and low-elevation sites using the &delta;-&delta; paleoaltimetry approach to discern between different surface uplift histories.</p

Phase equilibrium modelling of the amphibolite to granulite facies transition in metabasic rocks (Ivrea Zone, NW Italy)

The development of thermodynamic models for tonalitic melt and the updated clinopyroxene and amphibole models now allow the use of phase equilibrium modelling to estimate P–T conditions and melt production for anatectic mafic and intermediate rock types at high‐temperature conditions. The Permian mid‐lower crustal section of the Ivrea Zone preserves a metamorphic field gradient from mid amphibolite facies to granulite facies, and thus records the onset of partial melting in metabasic rocks. Interlayered metabasic and metapelitic rocks allows the direct comparison of P–T estimates and partial melting between both rock types with the same metamorphic evolution. Pseudosections for metabasic compositions calculated in the Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–O (NCKFMASHTO) system are presented and compared with those of metapelitic rocks calculated with consistent endmember data and a–x models. The results presented in this study show that P–T conditions obtained by phase equilibria modelling of both metabasic and metapelitic rocks give consistent results within uncertainties, allowing integration of results obtained for both rock types. In combination, the calculations for both metabasic and metapelitic rocks allows an updated and more precisely constrained metamorphic field gradient for Val Strona di Omegna to be defined. The new field gradient has a slightly lower dP/dT which is in better agreement with the onset of crustal thinning of the Adriatic margin during the Permian inferred in recent studies

Zircon ages in granulite facies rocks: decoupling from geochemistry above 850 °C?

Granulite facies rocks frequently show a large spread in their zircon ages, the interpretation of which raises questions: Has the isotopic system been disturbed? By what process(es) and conditions did the alteration occur? Can the dates be regarded as real ages, reflecting several growth episodes? Furthermore, under some circumstances of (ultra-)high-temperature metamorphism, decoupling of zircon U–Pb dates from their trace element geochemistry has been reported. Understanding these processes is crucial to help interpret such dates in the context of the P–T history. Our study presents evidence for decoupling in zircon from the highest grade metapelites (> 850 °C) taken along a continuous high-temperature metamorphic field gradient in the Ivrea Zone (NW Italy). These rocks represent a well-characterised segment of Permian lower continental crust with a protracted high-temperature history. Cathodoluminescence images reveal that zircons in the mid-amphibolite facies preserve mainly detrital cores with narrow overgrowths. In the upper amphibolite and granulite facies, preserved detrital cores decrease and metamorphic zircon increases in quantity. Across all samples we document a sequence of four rim generations based on textures. U–Pb dates, Th/U ratios and Ti-in-zircon concentrations show an essentially continuous evolution with increasing metamorphic grade, except in the samples from the granulite facies, which display significant scatter in age and chemistry. We associate the observed decoupling of zircon systematics in high-grade non-metamict zircon with disturbance processes related to differences in behaviour of non-formula elements (i.e. Pb, Th, U, Ti) at high-temperature conditions, notably differences in compatibility within the crystal structure

Miocene high elevation and high relief in the Central Alps

Reconstructing Oligocene–Miocene paleoelevation contributes to our understanding of the evolutionary history of the European Alps and sheds light on geodynamic and Earth surface processes involved in the development of Alpine topography. Despite being one of the most intensively explored mountain ranges worldwide, constraints on the elevation history of the European Alps remain scarce. Here we present stable and clumped isotope measurements to provide a new paleoelevation estimate for the mid-Miocene (∼14.5 Ma) European Central Alps. We apply stable isotope δ–δ paleoaltimetry to near-sea-level pedogenic carbonate oxygen isotope (δ18O) records from the Northern Alpine Foreland Basin (Swiss Molasse Basin) and high-Alpine phyllosilicate hydrogen isotope (δD) records from the Simplon Fault Zone (Swiss Alps). We further explore Miocene paleoclimate and paleoenvironmental conditions in the Swiss Molasse Basin through carbonate stable (δ18O, δ13C) and clumped (Δ47) isotope data from three foreland basin sections in different alluvial megafan settings (proximal, mid-fan, and distal). Combined pedogenic carbonate δ18O values and Δ47 temperatures (30±5 ∘C) yield a near-sea-level precipitation δ18Ow value of -5.8±1.2‰ and, in conjunction with the high-Alpine phyllosilicate δD value of  -14.6±0.3‰, suggest that the region surrounding the Simplon Fault Zone attained surface elevations of &gt;4000 m no later than the mid-Miocene. Our near-sea-level δ18Ow estimate is supported by paleoclimate (iGCM ECHAM5-wiso) modeled δ18O values, which vary between −4.2 ‰ and −7.6 ‰ for the Northern Alpine Foreland Basin

Past, present, and future geo-biosphere interactions on the Tibetan Plateau and implications for permafrost

This manuscript resulted from a Workshop in 2019 at the Senckenberg Research Institute and Natural History Museum Frankfurt, Germany, supported by the Strategic Priority Research Program of the Chinese Academy of Sciences (Grant No. XDA20100300). J. Liu also thanks the support of the Henan Provincial Key Laboratory of Hydrosphere and Watershed Water Security. T. Ehlers thanks the California Institute of Technology Moore Distinguished Scholar Program for support in completing this manuscript during a sabbatical. J. Liu and T. Bolch thank the support from the Strategic Priority Research Program of the Chinese Academy of Sciences (grants no. XDA20060402, XDA20100300). We thank the German Science Foundation (DFG) for support of the TiP (Tibetan Plateau: Formation-Climate-Ecoystems) priority research program (SPP-1372) for initiating the collaborations that led to this manuscript.Interactions between the atmosphere, biosphere, cryosphere, hydrosphere, and geosphere are most active in the critical zone, a region extending from the tops of trees to the top of unweathered bedrock. Changes in one or more of these spheres can result in a cascade of changes throughout the system in ways that are often poorly understood. Here we investigate how past and present climate change have impacted permafrost, hydrology, and ecosystems on the Tibetan Plateau. We do this by compiling existing climate, hydrologic, cryosphere, biosphere, and geologic studies documenting change over decadal to glacial-interglacial timescales and longer. Our emphasis is on showing present-day trends in environmental change and how plateau ecosystems have largely flourished under warmer and wetter periods in the geologic past. We identify two future pathways that could lead to either a favorable greening or unfavorable degradation and desiccation of plateau ecosystems. Both paths are plausible given the available evidence. We contend that the key to which pathway future generations experience lies in what, if any, human intervention measures are implemented. We conclude with suggested management strategies that can be implemented to facilitate a future greening of the Tibetan Plateau.Publisher PDFPeer reviewe