430 research outputs found

    The Optimal Pricing of Pollution When Enforcement is Costly

    Get PDF
    We consider the pricing of a uniformly mixed pollutant when enforcement is costly with a model of optimal, possibly firm-specific, emissions taxes and their enforcement. We argue that optimality requires an enforcement strategy that induces full compliance by every firm. This holds whether or not regulators have complete information about firms’ abatement costs, the costs of monitoring them for compliance, or the costs of collecting penalties from noncompliant firms. Moreover, ignoring several unrealistic special cases, optimality requires discriminatory emissions taxes except when regulators are unable to observe firms’ abatement costs, the costs of monitoring individual firms, or any firm-specific characteristic that is known to be jointly distributed with either the firms’ abatement costs or their monitoring costs. In many pollution control settings, especially those that have been subject to various forms of environmental regulation in the past, regulators are not likely to be so ill-informed about individual firms. In these settings, policies that set or generate a uniform pollution price like conventional designs involving uniform taxes and competitive emission trading with freely-allocated or auctioned permits will not be efficient.Compliance, Enforcement, Emissions Taxes, Monitoring, Asymmetric Information, Uncertainty

    Efecto de diámetro de esfera y densidad celular en la producción de etanol con levadura inmovilizada en alginato

    Get PDF
    Effect of pellet diameter and cell density on ethanol production with alginate immobilized yeast Título corto: Producción de etanol con levadura inmovilizada ResumenLas células inmovilizadas tienen aplicación potencial en la producción de biocombustibles posibilitando la reutilización de biomasa, el empleo de diversas configuraciones de reactores y sistemas de cultivo, el manejo de altas densidades celulares alcanzando altas productividades volumétricas, y la simplificación de operaciones de procesamiento de salida. El objetivo del presente estudio fue evaluar la influencia del diámetro de las perlas y la densidad celular en la producción de etanol con Saccharomyces uvarum inmovilizada en alginato al 2% (p/v). Para ello se evaluaron tres diámetros de perlas de 2, 2,5 y 3 mm. Las células inmovilizadas fueron cultivadas en medio con 12% (p/v) de glucosa en biorreactores de columna sin agitación a 28 ºC, y se operaron cuatro lotes consecutivos de 48 horas cada uno. En cada lote se cuantificó el consumo de glucosa y se determinó la cantidad de etanol producido. Los rendimientos máximos de etanol para las esferas de 2, 2,5 y 3 mm de diámetro fueron 81, 83 y 97% del rendimiento teórico. La máxima productividad volumétrica de etanol fue 1,2 g/L-1/h-1 con un consumo de glucosa de 99,8% al término del lote, correspondiente a las columnas con perlas de 3 mm y con una producción de 0,017 g de etanol por esfera. La producción de etanol acumulada en cada sistema fue 178, 189 y 200 g/L-1 para 2, 2,5 y 3 mm respectivamente, encontrándose una relación directa con el diámetro de perla e inversa respecto a la densidad celular. Los rendimientos de etanol obtenidos son superiores a los reportados para la misma especie. Palabras clave: inmovilización, alginato, Saccharomyces uvarum, etanol, lote repetido.AbstractImmobilized cells have a potential use in biofuel production. They also allow re-using biomass, using diverse reactor configurations and culture systems, handling high cell densities to obtain high volumetric productivities and to simplify the downstream processing. The purpose of this work was to evaluate the influence of bead diameter and cell density on ethanol production using immobilized Saccharomyces uvarum in 2% (w/v) alginate. For that, three bead diameters (2, 2.5 and 3 mm) were evaluated. Immobilized cells were cultured on a 12% (w/v) glucose medium in column bioreactors without agitation at 28 °C for four 48 h–repeated batches. For each batch, both glucose consumption and ethanol produced were measured. Maximum yields for 2, 2.5 and 3 mm bead diameters were 81, 83 and 97% of theoretical yield. Maximum volumetric productivity of ethanol was 1.2 g/L-1/h-1 with 99.8% glucose consumption at the end of the batch, corresponding to the 3 mm bead diameter and the ethanol production per bead was 0.017 g. Accumulated ethanol production for each system was 178, 189 and 200 g/L-1 for 2, 2.5 y 3 mm bead diameter, respectively, being this directly related to bead diameter and inversely related to cell density. Ethanol yields were higher than those reported for the same species.Key words: Immobilization, alginate, Saccharomyces uvarum, ethanol, repeated batch

    Adenosine Deaminase Activity Is a Sensitive Marker for the Diagnosis of Tuberculous Pleuritis in Patients with Very Low CD4 Counts

    Get PDF
    Background: Adenosine Deaminase Activity (ADA) is a commonly used marker for the diagnosis of tuberculous pleural effusion. There has been concern about its usefulness in immunocompromised patients, especially HIV positive patients with very low CD4 counts. The objective of this study was to evaluate the sensitivity of ADA in pleural fluid in patients with low CD4 counts. Materials and Methods: This was a retrospective case control study. Medical files of patients with tuberculous pleuritis and non-tuberculous pleuritis were reviewed. Clinical characteristics, CD4 cell counts in blood and biochemical markers in pleural fluid, including ADA were recorded. Results: One ninety seven tuberculous pleuritis and 40 non- tuberculous pleuritis patients were evaluated. Using the cut-off value of 30 U/L, the overall sensitivity, specificity, positive likelihood ratio, and negative likelihood ratio of ADA was 94%, 95%, 19, and 0.06 respectively. The mean CD4 cell counts among TB pleuritis patients was 29 and 153 cells/microL in patients with CD4 ,50 cells/microL and .50 cells/microL, (p,0.05) respectively. The corresponding mean ADA values for these patients were 76 U/L and 72 U/L respectively (p.0.5). There was no correlation between ADA values and CD4 cell counts (r =20.120, p = 0.369). Conclusion: ADA analysis is a sensitive marker of tuberculous pleuritis even in HIV patients with very low CD4 counts in a high TB endemic region. The ADA assay is inexpensive, rapid, and simple to perform and is of great value for the immediate diagnosis of tuberculous pleuritis while waiting for culture result and this has a positive impact on patient outcome

    Review of low-cost sensors for indoor air quality: Features and applications

    Get PDF
    Humans spend the majority of their time indoors, where they are potentially exposed to hazardous pollutants. Within this context, over the past few years, there has been an upsurge of low-cost sensors (LCS) for the measurement of indoor air pollutants, motivated both by recent technological advances and by increased awareness of indoor air quality (IAQ) and its potential negative health impacts. Although not meeting the performance requirements for reference regulatory-equivalent monitoring indoors, LCS can provide informative measurements, offering an opportunity for high-resolution monitoring, emission source identification, exposure mitigation and managing IAQ and energy efficiency, among others. This article discusses the strengths and limitations that LCS offer for applications in the field of IAQ monitoring; it provides an overview of existing sensor technologies and gives recommendations for different indoor applications, considering their performance in the complex indoor environment and discussing future trends

    Host immunity in the protective response to nasal immunization with a pneumococcal antigen associated to live and heat-killed Lactobacillus casei

    Get PDF
    Background: At present, available pneumococcal vaccines have failed to eradicate infections caused by S. pneumoniae. Search for effective vaccine continues and some serotype independent pneumococcal proteins are considered as candidates for the design of new vaccines, especially a mucosal vaccine, since pneumococci enter the body through mucosal surfaces. Selection of the appropriate adjuvant is important for mucosal vaccines, and lactic acid bacteria (LAB) with immunostimulant properties are promissory candidates. In this work, we assessed the adjuvant effect of a probiotic strain, Lactobacillus casei (L. casei), when nasally administered with a pneumococcal antigen (pneumococcal protective protein A: PppA) for the prevention of pneumococcal infection. Adjuvanticity of both live (LcV) and heat-killed (LcM) was evaluated and humoral and cellular antigen-specific immune response was assessed in mucosal and systemic compartments. The potential mechanisms induced by nasal immunization were discussed.Results: Nasal immunization of young mice with PppA+LcV and PppA+LcM induced anti-PppA IgA and IgG antibodies in mucosal and systemic compartments and levels of these specific antibodies remained high even at day 45 after the 3rd Immunization (3rd I). These results were correlated with IL-4 induction by the mixture of antigen plus LcV and LcM. Also, PppA+Lc (V and M) induced stimulation of Th1 and Th17 cells involved in the defence against pneumococci. The protection against pneumococcal respiratory challenge at day 30 after the 3rd I showed that PppA+LcV and PppA+LcM immunizations significantly reduced pathogen counts in nasal lavages while prventing their passage into lung and blood. Survival of mice immunized with the co-application of PppA plus LcV and LcM was significantly higher than in mice immunized with PppA alone and control mice when intraperitoneal challenge was performed. No significant differences between the treatments involving LcV and LcM were found.Conclusions: Live and heat-killed L. casei enhanced the antigen-specific immune response when administered nasally with a pneumococcal antigen. Considering the potential risk associated with live bacteria, the design of a nasal vaccine based on pneumococcal antigens and heat-killed L. casei emerges as a safe and effective strategy for the prevention of pneumococcal infections and opens new possibilities of application of dead LAB as adjuvants in vaccine formulations against other pathogens.Fil: Vintiñi, Elisa Ofelia. Universidad Nacional de Tucumán. Facultad de Agronomía y Zootecnia; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Tucumán. Centro de Referencia para Lactobacilos; ArgentinaFil: Medina, Marcela Susana. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Tucumán. Centro de Referencia para Lactobacilos; Argentina. Universidad Nacional de Tucumán. Facultad de Bioquímica, Química y Farmacia; Argentin

    Does pleural fluid appearance really matter? The relationship between fluid appearance and cytology, cell counts, and chemical laboratory measurements in pleural effusions of patients with cancer

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Previous reports have suggested that the appearance of pleural effusions (i.e., the presence or absence of blood) might help to establish the etiology of the effusions. This study explores the relationship between pleural fluid appearance and the results of chemical and cytological analyses in a group of patients with recurrent symptomatic pleural effusions and a diagnosis of cancer.</p> <p>Methods</p> <p>Medical records were reviewed from all 390 patients who were diagnosed with cancer, who underwent thoracentesis before placement of an intrapleural catheter (IPC) between April 2000 and January 2006. Adequate information for data analysis was available in 365 patients. The appearance of their pleural fluid was obtained from procedure notes dictated by the pulmonologists who had performed the thoracenteses. The patients were separated into 2 groups based on fluid appearance: non-bloody and bloody. Group differences in cytology interpretation were compared by using the chi square test. Cellular counts, chemical laboratory results, and survival after index procedure were compared by using the student's t test.</p> <p>Results</p> <p>Pleural fluid cytology was positive on 82.5% of the non-bloody effusions and on 82.4% of the bloody ones. The number of red blood cells (220.5 × 10<sup>3</sup>/μL vs. 12.3 × 10<sup>3</sup>/μL) and LDH values (1914 IU/dl vs. 863 IU/dl) were statistically higher in bloody pleural effusions.</p> <p>Conclusion</p> <p>The presence or absence of blood in pleural effusions cannot predict their etiology in patients with cancer and recurrent symptomatic pleural effusions.</p

    Estimation of the solubility parameters of model plant surfaces and agrochemicals: a valuable tool for understanding plant surface interactions

    Get PDF
    Background Most aerial plant parts are covered with a hydrophobic lipid-rich cuticle, which is the interface between the plant organs and the surrounding environment. Plant surfaces may have a high degree of hydrophobicity because of the combined effects of surface chemistry and roughness. The physical and chemical complexity of the plant cuticle limits the development of models that explain its internal structure and interactions with surface-applied agrochemicals. In this article we introduce a thermodynamic method for estimating the solubilities of model plant surface constituents and relating them to the effects of agrochemicals. Results Following the van Krevelen and Hoftyzer method, we calculated the solubility parameters of three model plant species and eight compounds that differ in hydrophobicity and polarity. In addition, intact tissues were examined by scanning electron microscopy and the surface free energy, polarity, solubility parameter and work of adhesion of each were calculated from contact angle measurements of three liquids with different polarities. By comparing the affinities between plant surface constituents and agrochemicals derived from (a) theoretical calculations and (b) contact angle measurements we were able to distinguish the physical effect of surface roughness from the effect of the chemical nature of the epicuticular waxes. A solubility parameter model for plant surfaces is proposed on the basis of an increasing gradient from the cuticular surface towards the underlying cell wall. Conclusions The procedure enabled us to predict the interactions among agrochemicals, plant surfaces, and cuticular and cell wall components, and promises to be a useful tool for improving our understanding of biological surface interactions

    C16 ceramide is crucial for triacylglycerol-induced apoptosis in macrophages

    Get PDF
    Triacylglycerol (TG) accumulation caused by adipose triglyceride lipase (ATGL) deficiency or very low-density lipoprotein (VLDL) loading of wild-type (Wt) macrophages results in mitochondrial-mediated apoptosis. This phenotype is correlated to depletion of Ca2+ from the endoplasmic reticulum (ER), an event known to induce the unfolded protein response (UPR). Here, we show that ER stress in TG-rich macrophages activates the UPR, resulting in increased abundance of the chaperone GRP78/BiP, the induction of pancreatic ER kinase-like ER kinase, phosphorylation and activation of eukaryotic translation initiation factor 2A, the translocation of activating transcription factor (ATF)4 and ATF6 to the nucleus and the induction of the cell death executor CCAAT/enhancer-binding protein homologous protein. C16:0 ceramide concentrations were increased in Atgl–/– and VLDL-loaded Wt macrophages. Overexpression of ceramide synthases was sufficient to induce mitochondrial apoptosis in Wt macrophages. In accordance, inhibition of ceramide synthases in Atgl–/– macrophages by fumonisin B1 (FB1) resulted in specific inhibition of C16:0 ceramide, whereas intracellular TG concentrations remained high. Although the UPR was still activated in Atgl–/– macrophages, FB1 treatment rescued Atgl–/– macrophages from mitochondrial dysfunction and programmed cell death. We conclude that C16:0 ceramide elicits apoptosis in Atgl–/– macrophages by activation of the mitochondrial apoptosis pathway

    Evaluation of seven tumour markers in pleural fluid for the diagnosis of malignant effusions

    Get PDF
    Carcinoembryonic antigen (CEA), carbohydrate antigens 15–3, 19–9 and 72–4 (CA 15–3, CA 19–9 and CA 72–4), cytokeratin 19 fragments (CYFRA 21–1), neuron-specific enolase (NSE) and squamous cell carcinoma antigen (SCC) were evaluated in pleural fluid for the diagnosis of malignant effusions. With a specificity of 99%, determined in a series of 121 benign effusions, the best individual diagnostic sensitivities in the whole series of 215 malignant effusions or in the subgroup of adenocarcinomas were observed with CEA, CA 15–3 and CA 72–4. As expected, a high sensitivity was obtained with SCC in squamous cell carcinomas and with NSE in small-cell lung carcinomas. CYFRA and/or CA 15–3 were frequently increased in mesotheliomas. Discriminant analysis showed that the optimal combination for diagnosis of non-lymphomatous malignant effusions was CEA + CA 15–3 + CYFRA + NSE: sensitivity of 94.4% with an overall specificity of 95%. In malignant effusions with a negative cytology, 83.9% were diagnosed using this association. The association CYFRA + NSE + SCC was able to discriminate adenocarcinomas from small-cell lung cancers. Regarding their sensitivity and their complementarity, CEA, CA 15–3, CYFRA 21–1, NSE and SCC appear to be very useful to improve the diagnosis of malignant pleural effusions. © 1999 Cancer Research Campaig

    A Novel Intronic Single Nucleotide Polymorphism in the Myosin heavy polypeptide 4 Gene Is Responsible for the Mini-Muscle Phenotype Characterized by Major Reduction in Hind-Limb Muscle Mass in Mice

    Get PDF
    Replicated artificial selection for high levels of voluntary wheel running in an outbred strain of mice favored an autosomal recessive allele whose primary phenotypic effect is a 50% reduction in hind-limb muscle mass. Within the High Runner (HR) lines of mice, the numerous pleiotropic effects (e.g., larger hearts, reduced total body mass and fat mass, longer hind-limb bones) of this hypothesized adaptive allele include functional characteristics that facilitate high levels of voluntary wheel running (e.g., doubling of mass-specific muscle aerobic capacity, increased fatigue resistance of isolated muscles, longer hind-limb bones). Previously, we created a backcross population suitable for mapping the responsible locus. We phenotypically characterized the population and mapped the Minimsc locus to a 2.6-Mb interval on MMU11, a region containing ∼100 known or predicted genes. Here, we present a novel strategy to identify the genetic variant causing the mini-muscle phenotype. Using high-density genotyping and whole-genome sequencing of key backcross individuals and HR mice with and without the mini-muscle mutation, from both recent and historical generations of the HR lines, we show that a SNP representing a C-to-T transition located in a 709-bp intron between exons 11 and 12 of the Myosin heavy polypeptide 4 (Myh4) skeletal muscle gene (position 67,244,850 on MMU11; assembly, December 2011, GRCm38/mm10; ENSMUSG00000057003) is responsible for the mini-muscle phenotype, Myh4Minimsc. Using next-generation sequencing, our approach can be extended to identify causative mutations arising in mouse inbred lines and thus offers a great avenue to overcome one of the most challenging steps in quantitative genetics
    corecore