Interdisciplinary applications and interpretations of remotely sensed data

An interdisciplinary approach to use remote sensor for the inventory of natural resources is discussed. The areas under investigation are land use, determination of pollution sources and damage, and analysis of geologic structure and terrain. The geographical area of primary interest is the Susquehanna River Basin. Descriptions of the data obtained by aerial cameras, multiband cameras, optical mechanical scanners, and radar are included. The Earth Resources Technology Satellite and Skylab program are examined. Interpretations of spacecraft data to show specific areas of interest are developed

A TWT amplifier with a linear power transfer characteristic and improved efficiency

A novel method called "Dynamic Velocity Taper' to linearize the Pout versus Pin transfer characteristic that does not require any extraneous circuitry or tuning, has large bandwidth capabilities ( 10 percent) and offers also an increase in the intrinsic traveling wave tube (TWT) efficiency by 1 to 2 dB is described. In addition, the method permits the TWT to be operated at or near the synchronous voltage (b plus or minus o) which produces a flat small and large signal gain responses and low AM to PM conversion. The physics of the method and experimental verification are given. The implementation should have a significant impact on TWT performance and increase the channel capacity of communication satellites

Modelling Water Trade in the Southern Murray-Darling Basin

Released in November 2004, the paper uses TERM-Water, a bottoms-up regional CGE model of the Australian economy, to examine the regional effects of expanding trade of irrigation water in the southern Murray- Darling Basin. The study finds that water trading dampens the impact of water allocation cuts on gross regional product (GRP). The benefits of introducing trading within irrigation districts are greater than the further benefits of expanding trade to between these regions. Permitting trade of seasonal allocations allows irrigators to reallocate water in reaction to climatic conditions and water availability - and it is this flexibility that enables GRP reductions to be minimised.southern murray-darling basin, CGE model, irrigation water, water allocation, water trade,

Modeling Changes in Measured Conductance of Thin Boron Carbide Semiconducting Films Under Irradiation

Semiconducting, p-type, amorphous partially dehydrogenated boron carbide films (a-B10C2+x:Hy) were deposited utilizing plasma enhanced chemical vapor deposition (PECVD) onto n-type silicon thus creating a heterojunction diode. A model was developed for the conductance of the device as a function of perturbation frequency (��) that incorporates changes of the electrical properties for both the a-B10C2+x:Hy film and the silicon substrate when irradiated. The virgin model has 3 independent variables (R1, C1, R3), and 1 dependent variable (��). Samples were then irradiated with 200 keV He+ ions, and the conductance model was matched to the measured data. It was found that initial irradiation (0.1 displacements per atom (dpa) equivalent) resulted in a decrease in the parallel junction resistance parameter from 6032 Ω to 2705 Ω. Further irradiation drastically increased the parallel junction resistance parameter to 39000 Ω (0.2 dpa equivalent), 77440 Ω (0.3 dpa equivalent), and 190000 Ω (0.5 dpa equivalent). It is believed that the initial irradiation causes type inversion of the silicon substrate changing the original junction from a p-n to a p-p+ with a much lower barrier height leading to a lower junction resistance component between the a-B10C2+x:Hy and irradiated silicon. Additionally, it was found that after irradiation, a second parallel resistor and capacitor component is required for the model, introducing 2 additional independent variables (R2, C2). This is interpreted as the junction between the irradiated and virgin silicon near ion end of range

A South African review of harmonic emission level assessment as per IEC61000-3-6

Large-scale renewable power producing plants are being integrated into South African networks. Network operators need to ensure that Renewable Power Plants (RPP) do not negatively affect the power quality levels of their networks, as harmonics amongst others could become a concern. IEC 61000-3-6 details a method for allocating voltage harmonic emission limits for distorting loads. This method works well for the allocation of emission limits; however it does not address the management of harmonic emissions once a plant is connected to the network. The management of harmonic emissions requires that network operators measure or quantify the emissions from loads and generators to determine compliance. Post-connection quantification of harmonic levels and compliance is a challenge for network operators. The question asked is “How should a network operator measure/quantify the harmonic emissions of a load/generator to establish compliance with the calculated limits as per IEC 61000-3-6”. This paper reviews within a South African context methods of assessing harmonic emission levels and then evaluates these methods by means of field data. Opportunities for improvement are identified and operational requirements discussed

Water activities in the Kerala Khondalite Belt

The author and colleagues presented their determinations of water activities in various granulite-facies rocks of the Kerala Khondalite Belt. Using mineral equilibria, thermodynamic data, and assumed geopressure-geotemperature conditions of 5.5 kbar and 750 C, they calculated uniformly low a(H2O) values of about 0.27 over a large geographic region. They suggested that these conditions were produced by the presence of abundant CO2-rich fluids, derived either from deeper levels or from metamorphic reactions involving graphite