Experimental realization of a high-contrast grating based broadband quarter-wave plate

Cataloged from PDF version of article.Fabrication and experimental characterization of a broadband quarter-wave plate, which is based on two-dimensional and binary silicon high-contrast gratings, are reported. The quarter-wave plate feature is achieved by the utilization of a regime, in which the proposed grating structure exhibits nearly total and approximately equal transmission of transverse electric and transverse magnetic waves with a phase difference of approximately pi/2. The numerical and experimental results suggest a percent bandwidth of 42% and 33%, respectively, if the operation regime is defined as the range for which the conversion efficiency is higher than 0.9. A compact circular polarizer can be implemented by combining the grating with a linear polarizer. (C) 2012 Optical Society of Americ

PUMA: Efficient and Low-Cost Memory Allocation and Alignment Support for Processing-Using-Memory Architectures

Processing-using-DRAM (PUD) architectures impose a restrictive data layout and alignment for their operands, where source and destination operands (i) must reside in the same DRAM subarray (i.e., a group of DRAM rows sharing the same row buffer and row decoder) and (ii) are aligned to the boundaries of a DRAM row. However, standard memory allocation routines (i.e., malloc, posix_memalign, and huge pages-based memory allocation) fail to meet the data layout and alignment requirements for PUD architectures to operate successfully. To allow the memory allocation API to influence the OS memory allocator and ensure that memory objects are placed within specific DRAM subarrays, we propose a new lazy data allocation routine (in the kernel) for PUD memory objects called PUMA. The key idea of PUMA is to use the internal DRAM mapping information together with huge pages and then split huge pages into finer-grained allocation units that are (i) aligned to the page address and size and (ii) virtually contiguous. We implement PUMA as a kernel module using QEMU and emulate a RISC-V machine running Fedora 33 with v5.9.0 Linux Kernel. We emulate the implementation of a PUD system capable of executing row copy operations (as in RowClone) and Boolean AND/OR/NOT operations (as in Ambit). In our experiments, such an operation is performed in the host CPU if a given operation cannot be executed in our PUD substrate (due to data misalignment). PUMA significantly outperforms the baseline memory allocators for all evaluated microbenchmarks and allocation sizes

Relationship between internal accuracy and load-bearing capacity of minimally invasive lithium disilicate occlusal veneers

Purpose: To test whether internal accuracy affects the load-bearing capacity of 0.5-mm-thick occlusal veneers made out of milled or heat-pressed lithium disilicate (LS2). Materials and methods: Extracted human molars (N = 80) were divided into four groups (n = 20 each) depending on the bonding substrate (enamel [E] or dentin [D]) and the fabrication method (milling [CAD] or heat pressing [PRE]) for the occlusal LS2 veneers: (1) E-CAD, (2) D-CAD, (3) E-PRE, or (4) D-PRE. After restoration fabrication, the abutment teeth and the corresponding restorations were scanned and superimposed in order to measure the marginal and internal accuracy. After adhesive cementation, the specimens were thermomechanically aged and thereafter loaded until fracture. The load-bearing capacities (Fmax) were measured. Fmax and the marginal and internal accuracy between the groups were compared using Kruskal-Wallis test (P < .05) and pairwise group comparisons. In addition, the relationship between Fmax and the internal accuracy was analyzed using Spearman rank correlation. Results: Median Fmax values (and first and third quartiles) per group were as follows: 1,495 N (Q1: 932; Q3: 2'318) for E-CAD; 1,575 N (Q1: 1,314; Q3: 1,668) for E-PRE; 1,856 N (Q1: 1,555; Q3: 2,013) for D-CAD; and 1,877 N (Q1: 1,566; Q3: 2,131) for D-PRE. No statistical difference was found between the groups (P = .0981). Overall, the internal accuracy in the areas of the cusp (P < .0007) and fossa (P < .0001) showed significant differences. While no significant differences were detected in the marginal area (P = .3518), a significant correlation with a negative linear relationship was found between the 3D internal accuracy and the Fmax values (P = .0007). Conclusion: An increase in the internal accuracy raised the load-bearing capacity of minimally invasive LS2 occlusal veneers. In general, the restorations bonded to dentin in the occlusal regions showed a better accuracy compared to those bonded to enamel

Severity and progression rate of periodontitis are associated with an increased risk of hypertension of patients attending the university clinic

Peer reviewe

The Quenched Satellite Population Around Milky Way Analogs

We study the relative fractions of quenched and star-forming satellite galaxies in the Satellites Around Galactic Analogs (SAGA) survey and Exploration of Local VolumE Satellites (ELVES) program, two nearby and complementary samples of Milky Way-like galaxies that take different approaches to identify faint satellite galaxy populations. We cross-check and validate sample cuts and selection criteria, as well as explore the effects of different star-formation definitions when determining the quenched satellite fraction of Milky Way analogs. We find the mean ELVES quenched fraction ($\langle QF\rangle$), derived using a specific star formation rate (sSFR) threshold, decreases from $\sim$50% to $\sim$27% after applying a cut in absolute magnitude to match that of the SAGA survey ($\langle QF\rangle_{SAGA}\sim$9%). We show these results are consistent for alternative star-formation definitions. Furthermore, these quenched fractions remain virtually unchanged after applying an additional cut in surface brightness. Using a consistently-derived sSFR and absolute magnitude limit for both samples, we show that the quenched fraction and the cumulative number of satellites in the ELVES and SAGA samples broadly agree. We briefly explore radial trends in the ELVES and SAGA samples, finding general agreement in the number of star-forming satellites per host as a function of radius. Despite the broad agreement between the ELVES and SAGA samples, some tension remains with these quenched fractions in comparison to the Local Group and simulations of Milky Way analogs.Comment: 13 pages, 7 figures, 1 table, 1 appendix with 2 additional figures. Main results in Figure 3-6. Submitted to MNRAS and comments welcome

Peningkatan Nilai Kalori pada Batubara Lignit dengan Metode Aglomerasi Air dan Minyak Sawit pada PT. Indonesia Power Ujp Pltu Barru

Penggunaan batubara di PLTU sangat bergantung kepada kualitas batubara yang digunakan, karena semakin tinggi kualitas batubara maka akan memaksimalkan pembakaran dan secara langsung akan berdampak pada produksi listrik yang dihasilkan. Penelitian ini bertujuan untuk mengetahui peningkatan nilai kalori pada batubara lignit. Pada penelitian ini digunakan metode aglomerasi dengan media air dan minyak sawit yang pada setiap sampel diberi perlakukan yang sama namun mengalami peningkatan yang berbeda. Ada tiga sampel yang digunakan pada penelitian ini dimana pada setiap sampel memiliki komposisi batubara lignit seberat 1 gram, minyak sawit sebanyak 10,20,30 ml dan air sebanyak 100 ml. Hasil penelitian ini menunjukkan bahwa semakin banyak konsentrasi minyak maka semakin tinggi kadar karbon yang diikat, sehingga dapat meningkatkan nilai kalori batubara. Dilihat dari konsentrasi 30% pada setiap sampel batubara mengalami peningkatan nilai kalori yang sebelumnya 3.765,23 cal/gr menjadi 5.279,46 cal/gr pada sampel pertama, 3.567,44 cal/gr menjadi 4.989,07 cal/gr pada sampel kedua dan 4.026,07 cal/gr menjadi 5.166,98 cal/gr pada sampel ketiga. Dari hasil penelitian ini dapat disimpulkan bahwa batubara lignit yang digunakan di PLTU dapat ditingkatkan nilai kalorinya menggunakan metode aglomerasi air dan minyak sawit

Mutation of Directed Graphs -- Corresponding Regular Expressions and Complexity of Their Generation

Directed graphs (DG), interpreted as state transition diagrams, are traditionally used to represent finite-state automata (FSA). In the context of formal languages, both FSA and regular expressions (RE) are equivalent in that they accept and generate, respectively, type-3 (regular) languages. Based on our previous work, this paper analyzes effects of graph manipulations on corresponding RE. In this present, starting stage we assume that the DG under consideration contains no cycles. Graph manipulation is performed by deleting or inserting of nodes or arcs. Combined and/or multiple application of these basic operators enable a great variety of transformations of DG (and corresponding RE) that can be seen as mutants of the original DG (and corresponding RE). DG are popular for modeling complex systems; however they easily become intractable if the system under consideration is complex and/or large. In such situations, we propose to switch to corresponding RE in order to benefit from their compact format for modeling and algebraic operations for analysis. The results of the study are of great potential interest to mutation testing

Biocatalytic protein membranes fabricated by electrospinning

In this study, a protein-based catalytic membrane was produced by electrospinning. Membrane activity was characterised in terms of response current for various glucose concentrations. We focused on the preparation of a scaffold by converting a globular protein to other structural forms using catastrophic solvents. A scaffolding protein, bovine serum albumin, and an enzyme, glucose oxidase (GOD), were selected as a model natural carrier matrix and a biologically active agent, respectively. Beta-mercaptoethanol (β-ME) was used to convert the globular protein to an amyloid-like form. A structural stabilising agent, 2,2,2-triflouroethanol (TFE), was used to maintain the final α-helical structure of the amyloid-like protein. The TFE:PBS (phosphate-buffered saline) ratio and various electrospinning parameters were analysed to minimise activity loss. Using this approach, we applied electrospinning to an active enzyme to obtain biocatalytic nanofibrous membranes. After optimising the protein electrospinning process, the activities of the protein nanofibrous membranes were monitored. GOD remained active in the new membrane structure. The highest enzyme activity was observed for the membranes prepared with a 1.5:1 (v:v) TFE:PBS solvent ratio. In that particular case, the immobilized enzyme created a current of 0.7 μA and the apparent activity was 2547 ± 132 U/m2. © 2016, Elsevier B.V. All rights reserved

Improving Phase Change Memory Performance with Data Content Aware Access

A prominent characteristic of write operation in Phase-Change Memory (PCM) is that its latency and energy are sensitive to the data to be written as well as the content that is overwritten. We observe that overwriting unknown memory content can incur significantly higher latency and energy compared to overwriting known all-zeros or all-ones content. This is because all-zeros or all-ones content is overwritten by programming the PCM cells only in one direction, i.e., using either SET or RESET operations, not both. In this paper, we propose data content aware PCM writes (DATACON), a new mechanism that reduces the latency and energy of PCM writes by redirecting these requests to overwrite memory locations containing all-zeros or all-ones. DATACON operates in three steps. First, it estimates how much a PCM write access would benefit from overwriting known content (e.g., all-zeros, or all-ones) by comprehensively considering the number of set bits in the data to be written, and the energy-latency trade-offs for SET and RESET operations in PCM. Second, it translates the write address to a physical address within memory that contains the best type of content to overwrite, and records this translation in a table for future accesses. We exploit data access locality in workloads to minimize the address translation overhead. Third, it re-initializes unused memory locations with known all-zeros or all-ones content in a manner that does not interfere with regular read and write accesses. DATACON overwrites unknown content only when it is absolutely necessary to do so. We evaluate DATACON with workloads from state-of-the-art machine learning applications, SPEC CPU2017, and NAS Parallel Benchmarks. Results demonstrate that DATACON significantly improves system performance and memory system energy consumption compared to the best of performance-oriented state-of-the-art techniques.Comment: 18 pages, 21 figures, accepted at ACM SIGPLAN International Symposium on Memory Management (ISMM