436 research outputs found
Charaterization of CFRP with Lockin Thermography
Thermal waves are suited for non-contacting inspection of near-surface areas of solids [1]. The reason for this depth limitation is the strong attenuation of this modulated thermal diffusion process. The resulting depth range is frequency dependent, hence it has been pointed out very early that thermal waves allow for depth profiling by variation of modulation frequency [2, 3]
20 and 3D Numerical Simulations of Flux Cancellation
Cancellation of magnetic flux in the solar photosphere and chromosphere has been linked observationally and theoretically to a broad range of solar activity, from filament channel formation to CME initiation. Because this phenomenon is typically measured at only a single layer in the atmosphere, in the radial (line of sight) component of the magnetic field, the actual processes behind this observational signature are ambiguous. It is clear that reconnection is involved in some way, but the location of the reconnection sites and associated connectivity changes remain uncertain in most cases. We are using numerical modeling to demystify flux cancellation, beginning with the simplest possible configuration: a subphotospheric Lundquist flux tube surrounded by a potential field, immersed in a gravitationally stratified atmosphere, spanning many orders of magnitude in plasma beta. In this system, cancellation is driven slowly by a 2-cell circulation pattern imposed in the convection zone, such that the tops of the cells are located around the beta= 1 level (Le., the photosphere) and the flows converge and form a downdraft at the polarity inversion line; note however that no flow is imposed along the neutral line. We will present the results of 2D and 3D MHD-AMR simulations of flux cancellation, in which the flux at the photosphere begins in either an unsheared or sheared state. In all cases, a lOW-lying flux rope is formed by reconnection at the polarity inversion line within a few thousand seconds. The flux rope remains stable and does not rise, however, in contrast to models which do not include the presence of significant mass loading
Preflare magnetic and velocity fields
A characterization is given of the preflare magnetic field, using theoretical models of force free fields together with observed field structure to determine the general morphology. Direct observational evidence for sheared magnetic fields is presented. The role of this magnetic shear in the flare process is considered within the context of a MHD model that describes the buildup of magnetic energy, and the concept of a critical value of shear is explored. The related subject of electric currents in the preflare state is discussed next, with emphasis on new insights provided by direct calculations of the vertical electric current density from vector magnetograph data and on the role of these currents in producing preflare brightenings. Results from investigations concerning velocity fields in flaring active regions, describing observations and analyses of preflare ejecta, sheared velocities, and vortical motions near flaring sites are given. This is followed by a critical review of prevalent concepts concerning the association of flux emergence with flare
Entrepreneurial ways of designing and designerly ways of entrepreneuring: Exploring the relationship between design thinking and effectuation theory
[Article updated 06 August 2021 after first online publication: Typographical error in a few citations were corrected in this version.].Scholars have suggested that design thinking and effectuation theory may enrich each other. However, to date, we lack deeper theorizing and empirical evidence to further advance this valuable discourse for the benefit of innovation management. Our qualitative study draws on 41 in-depth interviews with Australian designer-founders, with the aim to provide a theoretical perspective on and empirical insights into the relationship between the behavioral practices of design thinking and the cognitive principles of effectuation. The contributions are twofold. First, our study explains how design thinking practices enable designer-founders to enact the cognitive principles of effectuation. Uncovering these “entrepreneurial ways of designing” provides an explanation for the effectiveness of design thinking for entrepreneurial innovation and new venture creation. Second, our study sheds light on the ways in which designer-founders interpret effectuation principles through the professional values and norms embodied in design thinking. These “designerly ways of entrepreneuring” resemble particular, normative interpretations of effectual action. By doing so, our study offers empirical substantiation and theoretical elaboration of the ways in which design thinking functions as an approach for entrepreneurial innovation and new venture creation. Through shedding light on the “entrepreneurial ways of designing” and “designerly ways of entrepreneuring” exhibited by designer-founders, our research reveals the reciprocal relationship between design thinking and effectuation theory.Nico Florian Klenner, Gerda Gemser, Ingo Oswald Karpe
The Effects of Wave Escape on Fast Magnetosonic Wave Turbulence in Solar Flares
One of the leading models for electron acceleration in solar flares is stochastic acceleration by weakly turbulent fast magnetosonic waves ("fast waves"). In this model, large-scale flows triggered by magnetic reconnection excite large-wavelength fast waves, and fast-wave energy then cascades from large wavelengths to small wavelengths. Electron acceleration by large-wavelength fast-waves is weak, and so the model relies on the small-wavelength waves produced by the turbulent cascade. In order for the model to work, the energy cascade time for large-wavelength fast waves must be shorter than the time required for the waves to propagate out of the solar-flare acceleration region. To investigate the effects of wave escape, we solve the wave kinetic equation for fast waves in weak turbulence theory, supplemented with a homogeneous wave-loss term.We find that the amplitude of large-wavelength fast waves must exceed a minimum threshold in order for a significant fraction of the wave energy to cascade to small wavelengths before the waves leave the acceleration region.We evaluate this threshold as a function of the dominant wavelength of the fast waves that are initially excited by reconnection outflows
Assembly of Drosophila Centromeric Chromatin Proteins during Mitosis
Semi-conservative segregation of nucleosomes to sister chromatids during DNA replication creates gaps that must be filled by new nucleosome assembly. We analyzed the cell-cycle timing of centromeric chromatin assembly in Drosophila, which contains the H3 variant CID (CENP-A in humans), as well as CENP-C and CAL1, which are required for CID localization. Pulse-chase experiments show that CID and CENP-C levels decrease by 50% at each cell division, as predicted for semi-conservative segregation and inheritance, whereas CAL1 displays higher turnover. Quench-chase-pulse experiments demonstrate that there is a significant lag between replication and replenishment of centromeric chromatin. Surprisingly, new CID is recruited to centromeres in metaphase, by a mechanism that does not require an intact mitotic spindle, but does require proteasome activity. Interestingly, new CAL1 is recruited to centromeres before CID in prophase. Furthermore, CAL1, but not CENP-C, is found in complex with pre-nucleosomal CID. Finally, CENP-C displays yet a different pattern of incorporation, during both interphase and mitosis. The unusual timing of CID recruitment and unique dynamics of CAL1 identify a distinct centromere assembly pathway in Drosophila and suggest that CAL1 is a key regulator of centromere propagation
Genome-wide analysis reveals a cell cycle–dependent mechanism controlling centromere propagation
Centromeres are the structural and functional foundation for kinetochore formation, spindle attachment, and chromosome segregation. In this study, we isolated factors required for centromere propagation using genome-wide RNA interference screening for defects in centromere protein A (CENP-A; centromere identifier [CID]) localization in Drosophila melanogaster. We identified the proteins CAL1 and CENP-C as essential factors for CID assembly at the centromere. CID, CAL1, and CENP-C coimmunoprecipitate and are mutually dependent for centromere localization and function. We also identified the mitotic cyclin A (CYCA) and the anaphase-promoting complex (APC) inhibitor RCA1/Emi1 as regulators of centromere propagation. We show that CYCA is centromere localized and that CYCA and RCA1/Emi1 couple centromere assembly to the cell cycle through regulation of the fizzy-related/CDH1 subunit of the APC. Our findings identify essential components of the epigenetic machinery that ensures proper specification and propagation of the centromere and suggest a mechanism for coordinating centromere inheritance with cell division
Spontaneous non-steady magnetic reconnection within the solar environment
This work presents a 2.5-dimensional simulation study of the instability of
current-sheets located in a medium with a strong density variation along the
current layer. The initial force-free configuration is observed to undergo a
two-stage evolution consisting of an abrupt regime transition from a slow to a
fast reconnection process leading the system to a final chaotic configuration.
Yet, the onset of the fast phase is not determined by the presence of any
anomalous enhancement in plasma's local resistivity, but rather is the result
of a new mechanism discovered in Lapenta (2008)* and captured only when
sufficient resolution is present. Hence, the effects of the global resistivity,
the global viscosity and the plasma beta on the overall dynamics are
considered. This mechanism allowing the transition from slow to fast
reconnection provides a simple but effective model of several processes taking
place within the solar atmosphere from the high chromosphere up to the low
corona. In fact, the understanding of a spontaneous transition to a
self-feeding fast reconnection regime as well as its macroscopic evolution is
the first and fundamental step to produce realistic models of all those
phenomena requiring fast (and high power) triggering events (* Lapenta G. 2008,
Phys. Rev. Lett., 100, 235001).Comment: 29 pages, 10 figure
Tests of Dynamical Flux Emergence as a Mechanism for CME Initiation
Current coronal mass ejection (CME) models set their lower boundary to be in
the lower corona. They do not calculate accurately the transfer of free
magnetic energy from the convection zone to the magnetically dominated corona
because they model the effects of flux emergence using kinematic boundary
conditions or simply assume the appearance of flux at these heights. We test
the importance of including dynamical flux emergence in CME modeling by
simulating, in 2.5D, the emergence of sub-surface flux tubes into different
coronal magnetic field configurations. We investigate how much free magnetic
energy, in the form of shear magnetic field, is transported from the convection
zone to the corona, and whether dynamical flux emergence can drive CMEs. We
find that multiple coronal flux ropes can be formed during flux emergence, and
although they carry some shear field into the corona, the majority of shear
field is confined to the lower atmosphere. Less than 10% of the magnetic energy
in the corona is in the shear field, and this, combined with the fact that the
coronal flux ropes bring up significant dense material, means that they do not
erupt. Our results have significant implications for all CME models which rely
on the transfer of free magnetic energy from the lower atmosphere into the
corona but which do not explicitly model this transfer. Such studies of flux
emergence and CMEs are timely, as we have new capabilities to observe this with
Hinode and SDO, and therefore to test the models against observations
- …