Malnutrition as cause and consequence of sensory distorsiones

La malnutrición es una enfermedad provocada por un exceso o defecto en el consumo o aprovechamiento de los nutrientes. Habitualmente, se utiliza este término para referirse a la desnutrición, es decir, a un trastorno derivado del déficit de algún macro y o micronutrientes. Las alteraciones quimiosensoriales pueden reducir de forma importante la alimentación en el individuo, por lo que es importante verificar que el aporte de nutrientes y, de forma concreta, de algunos micronutrientes, sea suficiente, ya que alguno de ellos, como el zinc, desempeñan un papel primordial en las alteraciones del gusto y del olfato. Además, el paciente malnutrido o con una alimentación que excluya gran número de alimentos, tiene mayor riesgo de presentar déficits de dichos micronutrientes. Diversas enfermedades, tanto agudas como crónicas, se asocian a alteraciones de la percepción sensorial, y pueden llegar a afectar a más del 50% de las personas mayores de 65 años. Los efectos provocados por los fármacos y algunos tratamientos como la quimioterapia y la radioterapia, juegan también un papel muy importante en la distorsión sensorial y en la incidencia de malnutriciónMalnutrition is a pathological condition caused by an excess or deficiency in the consumption or the use of the nutrients. Usually this term refers to a lack of adequate nourishment, a disorder resulting from a deficiency of some macro and/or micronutrients. Chemo-sensory alterations can significantly reduce food choice and intake, so it is very important to verify that the supply of nutrients and specifically of some micronutrients are sufficient. Some of them, such as “zinc”, play a very important role in alterations in the sense of taste and smell. In addition malnutrition patients or a poorly-balanced diet or faulty utilization of foods have increased the risk of deficiencies in these micronutrients. Several types of diseases, both acute and chronic ones, are associated with sensory perception and can affect more than 50% of people over 65 years old. The effects caused by drugs and some treatments such as chemotherapy and radiation therapy play an important role in sensory distortion and the incidence of malnutritio

Development of a prototype for submarine communications in shallow waters

The Telecommunications Marine Laboratory (TML) of the University of Cádiz takes part in a research project to study the intertidal sediments of the Bay of Cádiz. The collection of samples from the seabed and the transmission of data to the surface are performed by a Mini Profiler with four channels (MP4), which is supplied by UNISENSE. Each channel processes the samples collected by a single sensor. For power, control, and data transmission, a special wiring that connects the submerged subsystem with the surface subsystem is used. The tension transmitted by the cable to the MP4 structure makes its handling and positioning under water more difficult. This article explains the technological solution developed by the TML to replace some wiring from the MP4. For the prototype, two underwater acoustic modems have been used and an electronic system has been developed based on the Arduino platform, in order to multiplex, digitize, and transmit the data collected by the MP4 sensors, eliminating the need to use wiring. The submerged subsystem has an autonomous power supply by a battery.Peer Reviewe

An Expanding HI Photodissociated Region Associated with the Compact HII Region G213.880-11.837 in the GGD 14 Complex

We present high angular and spectral resolution HI 21~cm line observations toward the cometary-shaped compact HII region G213.880-11.837 in the GGD~14 complex.The kinematics and morphology of the photodissociated region, traced by the HI line emission, reveal that the neutral gas is part of an expanding flow. The kinematics of the HI gas along the major axis of G213.880-11.837 shows that the emission is very extended toward the SE direction, reaching LSR radial velocities in the tail of about 14 km/s. The ambient LSR radial velocity of the molecular gas is 11.5 km/s, which suggests a champagne flow of the HI gas. This is the second (after G111.61+0.37) cometary HII/HI region known.Comment: Accepted for publication in the Astronomical Journal (10 pages, 4 figures, 1 table

Debromination and Reusable Glass Fiber Recovery from Large Waste Circuit Board Pieces in Subcritical Water Treatment

The great economic, social, and environmental interest that favors an effective management of the recycling of waste printed circuit boards (WCBs) encourages research on the improvement of processes capable of mitigating their harmful effects. In this work, the debromination of large WCBs was first performed through a hydrothermal process employing potassium carbonate as an additive. A total of 32 runs were carried out at 225 °C, various CO32–/Br– anionic ratios of 1:1, 2:1, 4:1, and 6:1, treatment times from 30 to 360 min, proportion of submerged WCBs in the liquid of 100, 50, and 25% that corresponded with the use of three WCB sizes of 20 mm × 16.5 mm, 20 mm × 33 mm, and 80 mm × 33 mm, respectively, and solid/liquid ratios of 1:2 and 1:1 g/mL without other metallic catalysts. A debromination efficiency of 50 wt % was reached at only 225 °C (limited by mechanical reasons) and 360 min, using a CO32–/Br– anionic ratio of 4:1 and a solid/liquid ratio of 1:2 for a large WCB with only 25% of its volume submerged in the liquid. This means conservation of water and energy compared to previous studies. A muffle furnace was used later to thermally treat a total of 101 debrominated samples, at constant temperature or following a temperature scaling program. An estimated decrease in resistance to rupture of glass fibers of only around 50% was accomplished by following a temperature scaling program up to 475 °C, obtaining clean glass fibers of large size. The simple techniques proposed to obtain reusable glass fibers from WCBs as large as the size of the reactor allows (as it might be in their original size) could significantly improve interest in the industry.Support for this work was granted by the PID2019-105359RB-I00 project and the scholarship BES-2017-080382 from the Ministry of Science and Innovation of Spain and project UAUSTI20-05 from the University of Alicante

Improving efficiency and feasibility of subcritical water debromination of printed circuit boards E-waste via potassium carbonate adding

Waste printed circuit boards (WCBs) were debrominated under hydrothermal treatment, using potassium carbonate as an alkaline additive to improve debromination efficiency (DE). Two different high-pressure reactors were used: a 1-L stirred reactor, where the evolution of the DE was followed over time at a low CO32−/Br− ratio (1:25), and an elementary 0.1-L non-stirred reactor, used to find the optimal parameters and to simplify the hydrothermal debromination (HTD) process. Considering both reactors, experiments were conducted changing the temperature (200 °C, 225 °C, 250 °C, 275 °C), and also the CO32−/Br− anionic ratio (1:50, 1:25, 1:10, 1:5, 1:2.5, 1:1, 2:1, 4:1) and the solid/liquid ratio (1:10, 1:5, 1:2) in the case of the 0.1-L reactor. No metallic catalyst was required. A maximum DE of about 98.9 wt % was reached in the agitated vessel at 275 °C after 4 h, with an additive/bromine ratio of 1:25. Similar DE (99.6 wt %) was also achieved in the non-stirred reactor at only 225 °C and after 2 h, using an additive/bromine ratio of 4:1 and a solid/liquid ratio of only 1:2. Concerning the solid phase behaviour during debromination, only 5 % of the net calorific value (NCV) was lost after a complete HTD treatment of WCB.Support for this work was granted by CTQ2016-76608-R project and the scholarship BES-2017-080382 from the Ministry of Economy, Industry and Competitiveness (Spain)

Editorial: Research on emotion and learning: contributions from Latin America

Latin America has increased its share of world scientific publications by nearly twofold during the last two decades (approximately from 2 to 4%). Despite this positive trend, the scholarly impact of scientific research produced in the region - measured in terms of citation rate - remains low. Two interrelated factors that contribute to this situation is that most research groups tend to work in isolation or in local sporadic collaboration, and results are often published in journals that are not indexed in major citation databases (e.g., SCOPUS, or Web of Science). Ultimately, part of Latin American high-quality research seems to remain hidden from the rest of the world. Over the last decades, an important number of Latin American scientists have developed fruitful research agendas on questions on learning and emotion, focusing on basic and/or translational research with humans and other animal models, and implementing diverse methodologies. Notwithstanding the important contributions of these research programs, Latin American research on emotion and learning has followed the overall trend of other research fields throughout the region; namely, remaining partially hidden from the large scientific community of the world. This Research Topic aimed to engage researchers from Latin America to share their empirical and conceptual work on learning and emotion. Ultimately, this effort was expected to strengthen and integrate our regional community of experts, enhance global networking, and establish new challenges and developments for future investigation.Fil: Hurtado Parrado, Camilo. Fundación Universitaria Konrad Lorenz; ColombiaFil: Gantiva, Carlos. Universidad de Los Andes; VenezuelaFil: Gómez A., Alexander. University of North Carolina; Estados UnidosFil: Cuenya, Lucas. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Investigaciones Médicas. Universidad de Buenos Aires. Facultad de Medicina. Instituto de Investigaciones Médicas; ArgentinaFil: Ortega, Leonardo. Fundación Universitaria Konrad Lorenz; ColombiaFil: Rico, Javier L.. Fundación Universitaria Konrad Lorenz; Colombi

Social preferences and perceptions about rural multifunctionality in Castilla y León

Resume

Systematic Tools for the Conceptual Design of Inherently Safer Chemical Processes

Society is continuously facing challenges for safer chemical plants design, which is usually driven by economic criteria during the early steps of the design process, relegating safety concerns to the latest stages. This paper highlights the synergy of merging Process System Engineering tools with inherent safety principles. First, we design a superstructure that comprises several alternatives for streams, equipment, and process conditions, which exhibit different performance of economic and inherently safer indicators, the total annualized cost, and the Dow’s Fire and Explosion Index, respectively. The solution to this multiobjective problem is given by a Pareto set of solutions that indicates the existing trade-off between both objectives. The capabilities of the proposed framework are illustrated through two case studies, which solutions provide valuable insights into the design problem and are intended to guide decision-makers toward the adoption of inherently safer process alternatives.The authors acknowledge financial support from “Proyectos de l+D para grupos de investigación emergentes GV/2016/005” (Conselleria d’Educació, Investigació, Cultura i Esport, GENERALITAT VALENCIANA) and from the Spanish “Ministerio de Economía, Industria y Competitividad” (CTQ2016-77968-C3-02-P, AEI/FEDER, UE)

Study of the Briquetting Process of Walnut Shells for Pyrolysis and Combustion

Walnut shells can be used as fuels in power plants directly or as biochars obtained by pyrolysis or torrefaction. They are an example of clean waste biomass which shows a low ash content and a high Net Calorific Value, making them excellent for energy recovery in industrial and non-industrial applications, such as in bakeries, restaurants, and homes. Their main inconvenience is their low bulk density. Densification is a possible solution that reduces the costs of transportation, handling, and storage. In this work, after the characterization of the walnut shells, briquettes were obtained using a hydraulic piston press briquette machine under different conditions to find the best quality without the need for previous grinding for pelletizing. This method features easy operation and maintenance, and the briquette shape could be adapted as desired. The quality of the briquettes was measured through their density and durability. After fixing a compaction pressure to obtain acceptable briquettes, the factors affecting their quality were studied: operating temperature, moisture content, and the presence of small amounts of walnuts. Good quality briquettes were obtained with a compaction pressure of 66 MPa, with densities around 1040 kg/m3, and durabilities higher than 94% when the process was carried at 140 °C. The greatest increase in durability was observed between briquettes obtained at room temperature and those obtained at 80 °C. The presence of small amounts of walnuts, common after the shelling process, improved the durability. Although water is necessary, briquettes obtained from biomass with only 1% of moisture showed better durabilities. Therefore, walnut shells are suitable for obtaining good quality briquettes according to the specifications of solid biofuels established in the standards, without the need for any pretreatment.This research was funded by the Agencia Estatal de Investigación (Spain) [grant number AEI/10.13039/501100011033], by the University of Alicante [grant number UAUSTI21-03] and by the Spanish Ministerio de Economia y Competividad [Research Project CTQ2016-76608-R]

A Win–Win Combination to Inhibit Persistent Organic Pollutant Formation via the Co-Incineration of Polyvinyl Chloride E-Waste and Sewage Sludge

Persistent organic pollutant inhibition in the combustion process of polyvinyl chloride (PVC) by prior addition of an inhibitor is currently being studied, reducing the emission of pollutants, and thus reducing the large amount of waste PVC destined for landfill. In this work, the use of sewage sludge (SS) as an alternative to chemical inhibitors to improve the quality emissions of the incineration of polyvinyl chloride waste (PVC e-waste) was studied and optimized. Different combustion runs were carried out at 850 °C in a laboratory tubular reactor, varying both the molar ratio Ri (0.25, 0.50, 0.75) between inhibitors (N + S) and chlorine (Cl) and the oxygen ratio λ (0.15, 0.50) between actual oxygen and stoichiometric oxygen. The emissions of several semivolatile compounds families such as polycyclic aromatic hydrocarbons (PAHs), polychlorobenzenes (ClBzs), and polychlorophenols (ClPhs), with special interest in the emissions of the most toxic compounds, i.e., polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (dl-PCBs), were analyzed. A notable decrease in PCDD/F and dl-PCB formation was achieved in most of the experiments, especially for those runs performed under an oxygen-rich atmosphere (λ = 0.50), where the addition of sludge was beneficial with inhibition ratios Ri ≥ 0.25. An inhibition ratio of 0.75 showed the best results with almost a 100% reduction in PCDD/F formation and a 95% reduction in dl-PCB formation.Support for this work was granted by CTQ2016-76608-R project and the scholarship BES-2017-080382 from the Ministry of Economy, Industry and Competitiveness (Spain). GC-MS/QQQ used in the analysis was supported by Project IDIFEDER/2018/004 by the Generalitat Valenciana (Spain)