Carrier thermal escape in families of InAs/InP self-assembled quantum dots

We investigate the thermal quenching of the multimodal photoluminescence from InAs/InP (001) self-assembled quantum dots. The temperature evolution of the photoluminescence spectra of two samples is followed from 10 K to 300 K. We develop a coupled rate-equation model that includes the effect of carrier thermal escape from a quantum dot to the wetting layer and to the InP matrix, followed by transport, recapture or non-radiative recombination. Our model reproduces the temperature dependence of the emission of each family of quantum dots with a single set of parameters. We find that the main escape mechanism of the carriers confined in the quantum dots is through thermal emission to the wetting layer. The activation energy for this process is found to be close to one-half the energy difference between that of a given family of quantum dots and that of the wetting layer as measured by photoluminescence excitation experiments. This indicates that electron and holes exit the InAs quantum dots as correlated pairs

TRIAD zoning in Quebec: Experiences and results after 5 years

The TRIAD approach to forest management involves dividing the forest into 3 zones, each with its own management\ud objectives, but with the overall goal of increasing the ecological and economic sustainability of the forest. For the past 5 years, we have been experimenting with TRIAD zoning in central Quebec, incorporating social interests into the original concept of TRIAD management. Results generally indicate that this approach is economically viable, socially acceptable, and preferable ecologically in this area. Although much remains to be done, thus far the consensus among the\ud various project participants is that this approach may be a good fit for the public forest of Canada

Resonant energy transfer of triplet excitons from pentacene to PbSe nanocrystals.

The efficient transfer of energy between organic and inorganic semiconductors is a widely sought after property, but has so far been limited to the transfer of spin-singlet excitons. Here we report efficient resonant-energy transfer of molecular spin-triplet excitons from organic semiconductors to inorganic semiconductors. We use ultrafast optical absorption spectroscopy to track the dynamics of triplets, generated in pentacene through singlet exciton fission, at the interface with lead selenide (PbSe) nanocrystals. We show that triplets transfer to PbSe rapidly (<1 ps) and efficiently, with 1.9 triplets transferred for every photon absorbed in pentacene, but only when the bandgap of the nanocrystals is close to resonance (±0.2 eV) with the triplet energy. Following triplet transfer, the excitation can undergo either charge separation, allowing photovoltaic operation, or radiative recombination in the nanocrystal, enabling luminescent harvesting of triplet exciton energy in light-emitting structures.This is the author's accepted manuscript and will be under embargo until the 5th of April 2015. The final version is published by NPG in Nature Materials here: http://www.nature.com/nmat/journal/v13/n11/full/nmat4093.html

Production of rVSV-ZEBOV in serum-free suspension culture of HEK 293SF cells.

Abstract Ebola virus disease is an urgent international priority. Promising results for several vaccine candidates have been reported in non-human primate studies and clinical trials with the most promising being the rVSV-ZEBOV vaccine. In this study, we sought to produce rVSV-ZEBOV in HEK 293SF cells in suspension and serum-free media. The purpose of this study was to establish a process using the HEK 293SF production platform, optimise the production titre, demonstrate scalability and the efficiency of the generated material to elicit an immune reaction in an animal model. Critical process parameters were evaluated to maximize production yield and process robustness and the following operating conditions: 1–2 × 106 cells/mL grown in HyClone HyCell TransFx-H media infected at an MOI of 0.001 with a temperature shift to 34 °C during the production phase and a harvest of the product after 48 h. Using these conditions, scalability in a 3.5 L controlled bioreactor was shown reaching a titre of 1.19 × 108 TCID50/mL at the peak of production, the equivalent of 4165 doses of vaccine per litre. The produced virus was shown to be thermostable in the culture media and, when concentrated, purified and administered to mice, demonstrated the ability to induce a ZEBOV-specific immune response

Evaluation of novel HIV vaccine candidates using recombinant vesicular stomatitis virus vector produced in serum-free Vero cell cultures.

Acquired Immune Deficiency Syndrome (AIDS) in humans is a result of the destruction of the immune system caused by Human Immunodeficiency Virus (HIV) infection. This serious epidemic is still progressing world-wide. Despite advances in treatment, a safe and effective preventive HIV vaccine is desired to combat this disease, and to save millions of lives. However, such a vaccine is not available yet although extensive amounts of resources in research and development have been invested over three decades. In light of the recently approved Ebola virus disease vaccine based on a recombinant vesicular stomatitis virus (rVSV-ZEBOV), we present the results of our work on three novel VSV-vectored HIV vaccine candidates. We describe the design, rescue, production and purification method and evaluate their immunogenicity in mice prior to preclinical studies that will be performed in non-human primates. The production of each of the three candidate vaccines (rVSV-B6-NL4.3Env/SIVtm, rVSV-B6-NL4.3Env/Ebtm and rVSV-B6-A74Env(PN6)/SIVtm) was evaluated in small scale in Vero cells and it was found that production kinetics on Vero cells vary depending on the HIV gp surface protein used. Purified virus preparations complied with the WHO restrictions for the residual DNA and host cell protein contents. Finally, when administered to mice, all three rVSV-HIV vaccine candidates induced an HIV gp140-specific antibody response

An environmentally benign antimicrobial nanoparticle based on a silver-infused lignin core

Silver nanoparticles have antibacterial properties, but their use has been a cause for concern because they persist in the environment. Here, we show that lignin nanoparticles infused with silver ions and coated with a cationic polyelectrolyte layer form a biodegradable and green alternative to silver nanoparticles. The polyelectrolyte layer promotes the adhesion of the particles to bacterial cell membranes and, together with silver ions, can kill a broad spectrum of bacteria, including Escherichia coli, Pseudomonas aeruginosa and quaternary-amine-resistant Ralstonia sp. Ion depletion studies have shown that the bioactivity of these nanoparticles is time-limited because of the desorption of silver ions. High-throughput bioactivity screening did not reveal increased toxicity of the particles when compared to an equivalent mass of metallic silver nanoparticles or silver nitrate solution. Our results demonstrate that the application of green chemistry principles may allow the synthesis of nanoparticles with biodegradable cores that have higher antimicrobial activity and smaller environmental impact than metallic silver nanoparticles

Linking Auxin with Photosynthetic Rate via Leaf Venation

International audienceLand plants lose vast quantities of water to the atmosphere during photosynthetic gas exchange. In angiosperms, a complex network of veins irrigates the leaf, and it is widely held that the density and placement of these veins determines maximum leaf hydraulic capacity and thus maximum photosynthetic rate. This theory is largely based on interspecific comparisons and has never been tested using vein mutants to examine the specific impact of leaf vein morphology on plant water relations. Here we characterize mutants at the Crispoid (Crd) locus in pea (Pisum sativum), which have altered auxin homeostasis and activity in developing leaves, as well as reduced leaf vein density and aberrant placement of free-ending veinlets. This altered vein phenotype in crd mutant plants results in a significant reduction in leaf hydraulic conductance and leaf gas exchange. We find Crispoid to be a member of the YUCCA family of auxin biosynthetic genes. Our results link auxin biosynthesis with maximum photosynthetic rate through leaf venation and substantiate the theory that an increase in the density of leaf veins coupled with their efficient placement can drive increases in leaf photosynthetic capacity

Is it feasible to deliver a complex intervention to improve the outcome of falls in people with dementia? A protocol for the DIFRID feasibility study

Background: People with dementia (PWD) experience ten times as many incident falls as people without dementia. Little is known about how best to deliver services to people with dementia following a fall. We used an integrated, mixed-methods approach to develop a new intervention which combines theory generated via a realist synthesis and data on current provision and pathways, gathered through a prospective observational study as well as qualitative interviews, focus groups, and ethnographic observation. This intervention is to be tested in a feasibility study in the UK National Health Service. Methods: People living with dementia in one of three geographical areas will be eligible for the study if they experience a fall requiring healthcare attention and have an informal carer. Potential participants will be identified by community services (primary care, paramedics, telecare), secondary care (ED; facilitated discharge services; rehabilitation outreach teams) and research case registers. Participants will receive a complex multidisciplinary intervention focused on their goals and interests for up to 12 weeks. The intervention will be delivered by occupational therapists, physiotherapists and rehabilitation support workers. Feasibility outcomes will include recruitment and retention, suitability and acceptability of outcome measures and acceptability, feasibility and fidelity of intervention components. PWD outcome measures will include number of falls, Montreal Cognitive Assessment (MOCA), European Quality of Life Instrument (EQ-5D-5L), Quality of Life–Alzheimer’s Disease Scale (QOL-AD), Modified Falls Efficacy Scale (MFES) and Goal Attainment Scaling (GAS). PWD outcome measures completed by an informal carer will include Disability Assessment for Dementia (DAD), EQ-5D-5L Proxy, QoL-AD Proxy and a Health Utilisation Questionnaire (HUQ), The carer outcome measure will be the Zarit Burden Interview (ZBI). An embedded process evaluation will explore barriers and facilitators to recruitment and intervention delivery. Discussion: The study results will inform whether and how a larger multicentre RCT should be undertaken. A full RCT would have the potential to show how outcomes can be improved for people with dementia who have fallen. Ethics and dissemination: The National Research Ethics Service Committee Newcastle and North Tyneside 2 approved the feasibility study. Trial registration: International Standard Randomised Controlled Trial Registry Registration number: ISRCTN41760734 Date of registration: 16/11/201

Atomic force microscopy analysis of nanoparticles in non-ideal conditions

Nanoparticles are often measured using atomic force microscopy or other scanning probe microscopy methods. For isolated nanoparticles on flat substrates, this is a relatively easy task. However, in real situations, we often need to analyze nanoparticles on rough substrates or nanoparticles that are not isolated. In this article, we present a simple model for realistic simulations of nanoparticle deposition and we employ this model for modeling nanoparticles on rough substrates. Different modeling conditions (coverage, relaxation after deposition) and convolution with different tip shapes are used to obtain a wide spectrum of virtual AFM nanoparticle images similar to those known from practice. Statistical parameters of nanoparticles are then analyzed using different data processing algorithms in order to show their systematic errors and to estimate uncertainties for atomic force microscopy analysis of nanoparticles under non-ideal conditions. It is shown that the elimination of user influence on the data processing algorithm is a key step for obtaining accurate results while analyzing nanoparticles measured in non-ideal conditions