15 research outputs found

    Concrete sewer pipe corrosion induced by sulphuric acid environment

    Get PDF
    Corrosion of concrete sewer pipes induced by sulphuric acid attack is a recognised problem worldwide, which is not only an attribute of countries with hot climate conditions as thought before. The significance of this problem is by far only realised when the pipe collapses causing surface flooding and other severe consequences. To change the existing post-reactive attitude of managing companies, easy to use and robust models are required to be developed which currently lack reliable data to be correctly calibrated. This paper focuses on laboratory experiments of establishing concrete pipe corrosion rate by submerging samples in to 0.5 pH sulphuric acid solution for 56 days under 10ºC, 20ºC and 30ºC temperature regimes. The result showed that at very early stage of the corrosion process the samples gained overall mass, at 30ºC the corrosion progressed quicker than for other temperature regimes, however with time the corrosion level for 10ºC and 20ºC regimes tended towards those at 30ºC. Overall, at these conditions the corrosion rates of 10 mm/year, 13,5 mm/year and 17 mm/year were observed

    Household, community, sub-national and country-level predictors of primary cooking fuel switching in nine countries from the PURE study

    Get PDF
    Introduction. Switchingfrom polluting (e.g. wood, crop waste, coal)to clean (e.g. gas, electricity) cooking fuels can reduce household air pollution exposures and climate-forcing emissions.While studies have evaluated specific interventions and assessed fuel-switching in repeated cross-sectional surveys, the role of different multilevel factors in household fuel switching, outside of interventions and across diverse community settings, is not well understood. Methods.We examined longitudinal survey data from 24 172 households in 177 rural communities across nine countries within the Prospective Urban and Rural Epidemiology study.We assessed household-level primary cooking fuel switching during a median of 10 years offollow up (∼2005–2015).We used hierarchical logistic regression models to examine the relative importance of household, community, sub-national and national-level factors contributing to primary fuel switching. Results. One-half of study households(12 369)reported changing their primary cookingfuels between baseline andfollow up surveys. Of these, 61% (7582) switchedfrom polluting (wood, dung, agricultural waste, charcoal, coal, kerosene)to clean (gas, electricity)fuels, 26% (3109)switched between different polluting fuels, 10% (1164)switched from clean to polluting fuels and 3% (522)switched between different clean fuels

    Household, community, sub-national and country-level predictors of primary cooking fuel switching in nine countries from the PURE study

    Get PDF

    Battery Cell Equalization via Megahertz Multiple-Receiver Wireless Power Transfer

    No full text

    Transmitter Coils Design for Free-Positioning Omnidirectional Wireless Power Transfer System

    No full text

    A Low-Cost Voltage Equalizer Based on Wireless Power Transfer and a Voltage Multiplier

    No full text

    Autonomous Power Control in a Reconfigurable 6.78-MHz Multiple-Receiver Wireless Charging System

    No full text

    Optimal Design of Planar Magnetic Components for a Two-Stage GaN-Based DC–DC Converter

    No full text

    Resonant Frequency Tracking Scheme for <italic>LLC</italic> Converter Based on Large and Small Signal Combined Model

    No full text
    To achieve optimal system performance, it&#x2019;s recommended to operate an LLC resonant converter at its resonant frequency. However, in mass production, the resonant parameters of different products can deviate significantly. This means that we need to actively track the resonant frequency during practical usage. To address this issue, this paper presents a novel automatic control scheme for LLC converter that tracks the resonant frequency. The proposed control scheme is based on an accurate small-signal model, and an extended state observer which provides small-signal characteristics at the operating frequency. The controller checks the voltage gain of the converter and combines large-signal with small-signal models to control the LLC converter effectively. Compared to conventional automatic resonant frequency tracking (ARFT) control schemes, the proposed control scheme is easier to implement and requires fewer sensors. Experimental results demonstrate its effectiveness in tracking the resonant frequency. In summary, this manuscript proposes an effective ARFT control scheme for LLC converter that can track the resonant frequency with reduced sensors and is easier to implement

    František Palacký and Czech politics in the end of the last century

    Get PDF
    Timing of data collection in each country. (PDF 14 kb
    corecore