773 research outputs found

    cGMP kinase I regulates glucagon release

    Get PDF
    © 2009 Leiss et al; licensee BioMed Central Ltd. Blood glucose levels are tightly controlled by the two peptide hormones glucagon and insulin. At hyperglycaemia, B-cells in the islets of Langerhans secrete insulin, whereas islet A-cells release glucagon at hypoglycaemia to stimulate e.g. glucose production in the liver. Previously, an important role for nitric oxide (NO) in the development of type-1 diabetes mellitus (insulin dependent diabetes mellitus) was reported [1]. The mechanisms are unknown whereby NO modulates islet (mal-)function. We hypothesized that NO signals via the cGMP/cGMP kinase I (cGKI) pathway to modulate the endocrine control of blood glucose levels. Glucose homeostasis was studied in the conventional cGKI knockouts (KOs) and in cGKI rescue mice (RM) [2] in comparison to age- and littermat

    Tailored Charge Transfer Kinetics in Precursors for Organic Radical Batteries: A Joint Synthetic‐Theoretical Approach **

    Get PDF
    Abstract The development of sustainable energy storage devices is crucial for the transformation of our energy management. In this scope, organic batteries attracted considerable attention. To overcome the shortcomings of typically applied materials from the classes of redox‐active conjugated polymers (i. e., unstable cell voltages) and soft matter‐embedded stable organic radicals (i. e., low conductivity), a novel design concept was introduced, integrating such stable radicals within a conductive polymer backbone. In the present theory‐driven design approach, redox‐active (2,2,6,6‐tetramethylpiperidin‐1‐yl)oxyls (TEMPOs) were incorporated in thiophene‐based polymer model systems, while structure‐property relationships governing the thermodynamic properties as well as the charge transfer kinetics underlying the charging and discharging processes were investigated in a systematical approach. Thereby, the impact of the substitution pattern, the length as well as the nature of the chemical linker, and the ratio of TEMPO and thiophene units was studied using state‐of‐the‐art quantum chemical and quantum dynamical simulations for a set of six molecular model systems. Finally, two promising candidates were synthesized and electrochemically characterized, paving the way to applications in the frame of novel organic radical batteries.Radical approach : Molecular models of stable organic radicals incorporated in a conjugated backbone, with application in the field of organic radical batteries, are investigated by means of multiconfigurational methods. The theory‐guided design allows to tune the charge transfer kinetics as well as the underlying thermodynamics. Auspicious systems are synthesized and characterized electrochemically. imag

    Hydrophilic Crosslinked TEMPO‐Methacrylate Copolymers – a Straight Forward Approach towards Aqueous Semi‐Organic Batteries

    Get PDF
    Abstract Crosslinked hydrophilic poly(2,2,6,6‐tetramethylpiperidinyl‐ N ‐oxyl‐co‐[2‐(methacryloyloxy)‐ethyl]trimethyl ammonium chloride) [poly(TEMPO‐ co ‐METAC)] polymers with different monomer ratios are synthesized and characterized regarding a utilization as electrode material in organic batteries. These polymers can be synthesized rapidly utilizing commercial starting materials and reveal an increased hydrophilicity compared to the state‐of‐the‐art poly(2,2,6,6‐tetramethylpiperidinyl‐ N ‐oxyl‐4‐methacrylate) (PTMA). By increasing the hydrophilicity of the polymer, a preparation of cathode composites is enabled, which can be used for aqueous semi‐organic batteries. Detailed battery testing confirms that the additional METAC groups do not impair the battery behavior while enabling straight‐forward zinc‐TEMPO batteries.Organic cathode in aqueous electrolyte : A crosslinked hydrophilic 2,2,6,6‐tetramethylpiperidine‐ N ‐oxyl radical (TEMPO) bearing polymer was synthesized, which enables aqueous battery chemistries that have not been compatible with poly(TEMPO‐methacrylate) derived structures before. Extensive battery testing was performed, to reveal the battery chemistry of the polymer containing composite electrodes in an aqueous semi‐organic zinc coin‐cell setup. imag

    Aqueous Redox Flow Battery Suitable for High Temperature Applications Based on a Tailor‐Made Ferrocene Copolymer

    Get PDF
    Abstract Water‐soluble, and ferrocene‐containing methacrylamide copolymers with different comonomer ratios of the solubility‐promoting comonomer [2‐(methacryloyloxy)‐ethyl]‐trimethylammonium chloride (METAC) are synthesized in order to obtain a novel, temperature‐stable electrolyte for aqueous redox flow batteries. The electrochemical properties of one chosen polymer are studied in detail by cyclic voltammetry and rotating disc electrode (RDE) investigations. Additionally, the diffusion coefficient and the charge transfer rate are obtained from these measurements. The diffusion coefficient from RDE is compared to the value from synthetic boundary experiments at battery concentrations, using an analytical ultracentrifuge, yielding diffusion coefficients of a similar order of magnitude. The polymer is further tested in a redox flow battery setup. While performing charge and discharge experiments against the well‐established bis ‐(trimethylammoniumpropyl)‐viologen, the polymer reveals high columbic efficiencies of >99.8% and desirable apparent capacity retention, both at room temperature as well as at 60 °C. Further experiments are conducted to verify the stability of the active compounds under these conditions in both charge states. Lastly, the electrochemical behavior is linked to the characteristics of the polymers concerning absolute values of the molar mass and diffusion coefficients.A new ferrocene containing monomer is synthesized and its copolymerization with a water‐solubility promoting comonomer is investigated. The electrochemical and solution characteristics of a corresponding polymer are studied in detail. With a coulombic efficiency of >99.8% in an aqueous redox flow battery setup at 60 °C, a cheap, robust system for use at elevated temperatures is presented. imag

    Alien chromosome segment from Aegilops speltoides and Dasypyrum villosum increases drought tolerance in wheat via profuse and deep root system

    Get PDF
    BackgroundRecurrent drought associated with climate change is a major constraint to wheat (Triticum aestivum L.) productivity. This study aimed to (i) quantify the effects of addition/substitution/translocation of chromosome segments from wild relatives of wheat on the root, physiological and yield traits of hexaploid wheat under drought, and (ii) understand the mechanism(s) associated with drought tolerance or susceptibility in wheat-alien chromosome lines.MethodsA set of 48 wheat-alien chromosome lines (addition/substitution/translocation lines) with Chinese Spring background were used. Seedling root traits were studied on solid agar medium. To understand the influence of drought on the root system of adult plants, these 48 lines were grown in 150-cm columns for 65 d under full irrigation or withholding water for 58 d. To quantify the effect of drought on physiological and yield traits, the 48 lines were grown in pots under full irrigation until anthesis; after that, half of the plants were drought stressed by withholding water for 16 d before recording physiological and yield-associated traits.ResultsThe alien chromosome lines exhibited altered root architecture and decreased photochemical efficiency and seed yield and its components under drought. The wheat-alien chromosome lines T5DS5S#3L (TA5088) with a chromosome segment from Aegilops speltoides (5S) and T5DL(.)5V#3S (TA5638) with a chromosome segment from Dasypyrum villosum (5V) were identified as drought tolerant, and the drought tolerance mechanism was associated with a deep, thin and profuse root system.ConclusionsThe two germplasm lines (TA5088 and TA5638) could be used in wheat breeding programs to improve drought tolerance in wheat and understand the underlying molecular genetic mechanisms of root architecture and drought tolerance

    Interactions of Bacillus Mojavensis and Fusarium Verticillioides With a Benzoxazolinone (Boa) and Its Transformation Product, Apo

    Get PDF
    En:Journal of Chemical Ecology (2007, vol. 33, n. 10, p. 1885-1897)The benzoxazolinones, specifically benzoxazolin-2(3H)-one (BOA), are important transformation products of the benzoxazinones that can serve as allelochemicals providing resistance to maize from pathogenic bacteria, fungi, and insects. However, maize pathogens such as Fusarium verticillioides are capable of detoxifying the benzoxazolinones to 2-aminophenol (AP), which is converted to the less toxic N-(2-hydroxyphenyl) malonamic acid (HPMA) and 2-acetamidophenol (HPAA). As biocontrol strategies that utilize a species of endophytic bacterium, Bacillus mojavensis, are considered efficacious as a control of this Fusarium species, the in vitro transformation and effects of BOA on growth of this bacterium was examined relative to its interaction with strains of F. verticillioides. The results showed that a red pigment was produced and accumulated only on BOA-amended media when wild type and the progeny of genetic crosses of F. verticillioides are cultured in the presence of the bacterium. The pigment was identified as 2-amino-3H-phenoxazin-3-one (APO), which is a stable product. The results indicate that the bacterium interacts with the fungus preventing the usual transformation of AP to the nontoxic HPMA, resulting in the accumulation of higher amounts of APO than when the fungus is cultured alone. APO is highly toxic to F. verticillioides and other organisms. Thus, an enhanced biocontrol is suggested by this in vitro study. =580 $aEn:Journal of Chemical Ecolog
    • 

    corecore