Dynamical models with a general anisotropy profile

Both numerical simulations and observational evidence indicate that the outer regions of galaxies and dark matter haloes are typically mildly to significantly radially anisotropic. The inner regions can be significantly non-isotropic, depending on the dynamical formation and evolution processes. In an attempt to break the lack of simple dynamical models that can reproduce this behaviour, we explore a technique to construct dynamical models with an arbitrary density and an arbitrary anisotropy profile. We outline a general construction method and propose a more practical approach based on a parameterized anisotropy profile. This approach consists of fitting the density of the model with a set of dynamical components, each of which have the same anisotropy profile. Using this approach we avoid the delicate fine-tuning difficulties other fitting techniques typically encounter when constructing radially anisotropic models. We present a model anisotropy profile that generalizes the Osipkov-Merritt profile, and that can represent any smooth monotonic anisotropy profile. Based on this model anisotropy profile, we construct a very general seven-parameter set of dynamical components for which the most important dynamical properties can be calculated analytically. We use the results to look for simple one-component dynamical models that generate simple potential-density pairs while still supporting a flexible anisotropy profile. We present families of Plummer and Hernquist models in which the anisotropy at small and large radii can be chosen as free parameters. We also generalize these two families to a three-parameter family that self-consistently generates the set of Veltmann potential-density pairs. (Abridged...)Comment: 18 pages, accepted for publication in A&

CANEUS2006-11042 HIGH TEMPERATURE (800°C) MEMS PRESSURE SENSOR DEVELOPMENT INCLUDING REUSABLE PACKAGING FOR ROCKET ENGINE APPLICATIONS

ABSTRACT For aircraft and rocket engines there is a strong need to measure the pressure in the propulsion system at high temperature (HT) with a high local resolution. Miniaturized sensor elements commercially available show decisive disadvantages. With piezoelectric-based sensors working clearly above 500°C static pressures can not be measured. Optical sensors are very expensive and require complex electronics. SiC sensor prototypes are operated up to 650°C, but require high technological efforts. The present approach is based on resistors placed on top of a 2 mm diameter sapphire membrane (8 mm chip diameter). The strain gauges are made either of antimony doped tin oxide (SnO2:Sb) or platinum (Pt). This material combination allows for matching the thermal coefficients of expansion (TCE) of the materials involved. The morphology of the SnO 2 :Sb layer can be optimized to reduce surface roughness on the nanometer scale and hence, gas sensitivity. Antimony doping increases conductivity, but decreases the gauge factor. With this nanotechnological knowledge it is possible to adjust the material properties to the needs of our aerospace applications. Tin oxide was shown to be very stable at HT. We also measured a 2.5% change in electrica

Consistency criteria for generalized Cuddeford systems

General criteria to check the positivity of the distribution function (phase-space consistency) of stellar systems of assigned density and anisotropy profile are useful starting points in Jeans-based modeling. Here we substantially extend previous results, and we present the inversion formula and the analytical necessary and sufficient conditions for phase-space consistency of the family of multi-component Cuddeford spherical systems: the distribution function of each density component of these systems is defined as the sum of an arbitrary number of Cuddeford distribution functions with arbitrary values of the anisotropy radius, but identical angular momentum exponent. The radial trend of anisotropy that can be realized by these models is therefore very general. As a surprising by-product of our study, we found that the ``central cusp-anisotropy theorem'' (a necessary condition for consistency relating the values of the central density slope and of the anisotropy parameter) holds not only at the center, but at all radii in consistent multi-component generalized Cuddeford systems. This last result suggests that the so--called mass--anisotropy degeneracy could be less severe than what is sometimes feared.Comment: Comments: 8 pages, 3 figures, accepted by MNRA

High-fat diet impact on intestinal cholesterol conversion by the microbiota and serum cholesterol levels

Cholesterol-to-coprostanol conversion by the intestinal microbiota has been suggested to reduce intestinal and serum cholesterol availability, but the relationship between intestinal cholesterol conversion and the gut microbiota, dietary habits, and serum lipids has not been characterized in detail. We measured conserved proportions of cholesterol high and low-converter types in individuals with and without obesity from two distinct, independent low-carbohydrate high-fat (LCHF) dietary intervention studies. Across both cohorts, cholesterol conversion increased in previous low-converters after LCHF diet and was positively correlated with the fecal relative abundance of Eubacterium coprostanoligenes. Lean cholesterol high-converters had increased serum triacylglycerides and decreased HDL-C levels before LCHF diet and responded to the intervention with increased LDL-C, independently of fat, cholesterol, and saturated fatty acid intake. Our findings identify the cholesterol high-converter type as a microbiome marker, which in metabolically healthy lean individuals is associated with increased LDL-C in response to LCHF.publishedVersio

Genome sequence of the bioplastic-producing ‘‘Knallgas’’ bacterium Ralstonia eutropha H16

The H2-oxidizing lithoautotrophic bacterium Ralstonia eutropha H16 is a metabolically versatile organism capable of subsisting, in the absence of organic growth substrates, on H2 and CO2 as its sole sources of energy and carbon. R. eutropha H16 first attracted biotechnological interest nearly 50 years ago with the realization that the organism’s ability to produce and store large amounts of poly[R-(–)-3-hydroxybutyrate] and other polyesters could be harnessed to make biodegradable plastics. Here we report the complete genome sequence of the two chromosomes of R. eutropha H16. Together, chromosome 1 (4,052,032 base pairs (bp)) and chromosome 2 (2,912,490 bp) encode 6,116 putative genes. Analysis of the genome sequence offers the genetic basis for exploiting the biotechnological potential of this organism and provides insights into its remarkable metabolic versatility

Genome sequence analyses of two isolates from the recent Escherichia coli outbreak in Germany reveal the emergence of a new pathotype: Entero-Aggregative-Haemorrhagic Escherichia coli (EAHEC)

The genome sequences of two Escherichia coli O104:H4 strains derived from two different patients of the 2011 German E. coli outbreak were determined. The two analyzed strains were designated E. coli GOS1 and GOS2 (German outbreak strain). Both isolates comprise one chromosome of approximately 5.31 Mbp and two putative plasmids. Comparisons of the 5,217 (GOS1) and 5,224 (GOS2) predicted protein-encoding genes with various E. coli strains, and a multilocus sequence typing analysis revealed that the isolates were most similar to the entero-aggregative E. coli (EAEC) strain 55989. In addition, one of the putative plasmids of the outbreak strain is similar to pAA-type plasmids of EAEC strains, which contain aggregative adhesion fimbrial operons. The second putative plasmid harbors genes for extended-spectrum β-lactamases. This type of plasmid is widely distributed in pathogenic E. coli strains. A significant difference of the E. coli GOS1 and GOS2 genomes to those of EAEC strains is the presence of a prophage encoding the Shiga toxin, which is characteristic for enterohemorrhagic E. coli (EHEC) strains. The unique combination of genomic features of the German outbreak strain, containing characteristics from pathotypes EAEC and EHEC, suggested that it represents a new pathotype Entero-Aggregative-Haemorrhagic Escherichiacoli (EAHEC)

Messung der körperlichen Fitness in der NAKO Gesundheitsstudie: Methoden, Qualitätssicherung und erste deskriptive Ergebnisse

Die körperliche Fitness ist das Maß für die individuelle Fähigkeit, körperlich aktiv zu sein. Ihre wesentlichen Komponenten sind die kardiorespiratorische Fitness (Cardiorespiratory Fitness, CRF), die Muskelkraft und die Beweglichkeit. Neben der körperlichen Aktivität ist die körperliche Fitness ein wesentlicher Prädiktor für Morbidität und Mortalität. Ziel der Arbeit sind die Beschreibung der Erhebungsmethoden körperlicher Fitness in der NAKO Gesundheitsstudie und die Darstellung erster deskriptiver Ergebnisse. In der NAKO-Basiserhebung wurden die maximale Handgreifkraft (Grip Strength, GS) und die CRF als Komponenten der körperlichen Fitness über ein Handdynamometer bzw. über einen Fahrradergometertest mit submaximaler Belastung erhoben. Daraus wurde die maximale Sauerstoffaufnahme (VO2max) zur Beurteilung der CRF abgeleitet. Die Ergebnisse von insgesamt 99.068 GS-Messungen und 3094 Messungen der CRF beruhen auf einem Datensatz zur Halbzeit der Basiserhebung der NAKO (Alter 20–73 Jahre, 47 % Männer). Männer zeigten im Vergleich zu Frauen höhere Werte der körperlichen Fitness (Männer: GS = 47,8 kg, VO2max = 36,4 ml·min−1 · kg−1; Frauen: GS = 29,9 kg, VO2max = 32,3 ml·min−1 · kg−1). Ungefähr ab dem 50. Lebensjahr konnte ein Rückgang der GS verzeichnet werden, wohingegen die CRF ab der Altersgruppe 20–29 Jahre bis zu den ≥60-Jährigen kontinuierlich abfiel. Die GS und die VO2max zeigten nach Korrektur für das Körpergewicht einen linear positiven Zusammenhang (Männer β = 0,21; Frauen β = 0,35). Die Analysen zeigten eine gute Übereinstimmung der Verteilung der körperlichen Fitness in der NAKO im Vergleich zu anderen bevölkerungsbasierten Studien. Zukünftige Auswertungen werden insbesondere die unabhängige Bedeutung der GS und CRF bei der Prädiktion von Morbidität und Mortalität beleuchten.Physical fitness is defined as an individual’s ability to be physically active. The main components are cardiorespiratory fitness (CRF), muscle strength, and flexibility. Regardless of physical activity level, physical fitness is an important determinant of morbidity and mortality. The aim of the current study was to describe the physical fitness assessment methodology in the German National Cohort (NAKO) and to present initial descriptive results in a subsample of the cohort. In the NAKO, hand grip strength (GS) and CRF as physical fitness components were assessed at baseline using a hand dynamometer and a submaximal bicycle ergometer test, respectively. Maximum oxygen uptake (VO2max) was estimated as a result of the bicycle ergometer test. The results of a total of 99,068 GS measurements and 3094 CRF measurements are based on a data set at halftime of the NAKO baseline survey (age 20–73 years, 47% men). Males showed higher values of physical fitness compared to women (males: GS = 47.8 kg, VO2max = 36.4 ml·min−1 · kg−1; females: GS = 29.9 kg, VO2max = 32.3 ml · min−1 · kg−1). GS declined from the age of 50 onwards, whereas VO2max levels decreased continuously between the age groups of 20–29 and ≥60 years. GS and VO2max showed a linear positive association after adjustment for body weight (males β = 0.21; females β = 0.35). These results indicate that the physical fitness measured in the NAKO are comparable to other population-based studies. Future analyses in this study will focus on examining the independent relations of GS and CRF with risk of morbidity and mortality