35 research outputs found
Robust and Cooperative Image-Based Visual Servoing System Using a Redundant Architecture
The reliability and robustness of image-based visual servoing systems is still unsolved by the moment. In order to address this issue, a redundant and cooperative 2D visual servoing system based on the information provided by two cameras in eye-in-hand/eye-to-hand configurations is proposed. Its control law has been defined to assure that the whole system is stable if each subsystem is stable and to allow avoiding typical problems of image-based visual servoing systems like task singularities, features extraction errors, disappearance of image features, local minima, etc. Experimental results with an industrial robot manipulator based on Schunk modular motors to demonstrate the stability, performance and robustness of the proposed system are presented
A Comparative Analysis of 2D and 3D Tasks for Virtual Reality Therapies Based on Robotic-Assisted Neurorehabilitation for Post-stroke Patients
Post-stroke neurorehabilitation based on virtual therapies are performed completing repetitive exercises shown in visual electronic devices, whose content represents imaginary or daily life tasks. Currently, there are two ways of visualization of these task. 3D virtual environments are used to get a three dimensional space that represents the real world with a high level of detail, whose realism is determinated by the resolucion and fidelity of the objects of the task. Furthermore, 2D virtual environments are used to represent the tasks with a low degree of realism using techniques of bidimensional graphics. However, the type of visualization can influence the quality of perception of the task, affecting the patient's sensorimotor performance. The purpose of this paper was to evaluate if there were differences in patterns of kinematic movements when post-stroke patients performed a reach task viewing a virtual therapeutic game with two different type of visualization of virtual environment: 2D and 3D. Nine post-stroke patients have participated in the study receiving a virtual therapy assisted by PUPArm rehabilitation robot. Horizontal movements of the upper limb were performed to complete the aim of the tasks, which consist in reaching peripheral or perspective targets depending on the virtual environment shown. Various parameter types such as the maximum speed, reaction time, path length, or initial movement are analyzed from the data acquired objectively by the robotic device to evaluate the influence of the task visualization. At the end of the study, a usability survey was provided to each patient to analysis his/her satisfaction level. For all patients, the movement trajectories were enhanced when they completed the therapy. This fact suggests that patient's motor recovery was increased. Despite of the similarity in majority of the kinematic parameters, differences in reaction time and path length were higher using the 3D task. Regarding the success rates were very similar. In conclusion, the using of 2D environments in virtual therapy may be a more appropriate and comfortable way to perform tasks for upper limb rehabilitation of post-stroke patients, in terms of accuracy in order to effectuate optimal kinematic trajectories
Physiological Responses During Hybrid BNCI Control of an Upper-Limb Exoskeleton
When combined with assistive robotic devices, such as wearable robotics,
brain/neural-computer interfaces (BNCI) have the potential to restore the capabilities of handicapped
people to carry out activities of daily living. To improve applicability of such systems, workload and
stress should be reduced to a minimal level. Here, we investigated the user’s physiological reactions
during the exhaustive use of the interfaces of a hybrid control interface. Eleven BNCI-naive healthy
volunteers participated in the experiments. All participants sat in a comfortable chair in front of a
desk and wore a whole-arm exoskeleton as well as wearable devices for monitoring physiological,
electroencephalographic (EEG) and electrooculographic (EoG) signals. The experimental protocol
consisted of three phases: (i) Set-up, calibration and BNCI training; (ii) Familiarization phase ; and (iii)
Experimental phase during which each subject had to perform EEG and EoG tasks. After completing
each task, the NASA-TLX questionnaire and self-assessment manikin (SAM) were completed by
the user. We found significant differences (p-value < 0.05) in heart rate variability (HRV) and skin
conductance level (SCL) between participants during the use of the two different biosignal modalities
(EEG, EoG) of the BNCI. This indicates that EEG control is associated with a higher level of stress
(associated with a decrease in HRV) and mental work load (associated with a higher level of SCL)
when compared to EoG control. In addition, HRV and SCL modulations correlated with the subject’s
workload perception and emotional responses assessed through NASA-TLX questionnaires and SAM
Development of a robotic device for post-stroke home tele-rehabilitation
This work deals with the complex mechanical design task of converting a large pneumatic rehabilitation robot into an
electric and compact system for in-home post-stroke therapies without losing performance. It presents the new
HomeRehab robot that supports rehabilitation therapies in three dimensions with an adaptive controller that optimizes
patient recovery. A preliminary usability test is also conducted to show that its performance resembles that found in
RoboTherapist 2D commercial system designed for hospitals. The mechanical design of a novel and smart twodimensional force sensor at the end-effector is also described
Arquitectura de control multimodal para robótica asistencial
[Resumen] Este documento presenta una arquitectura de control multimodal para robótica de asistencia, la cual trata de tener en cuenta las decisiones del usuario para mejorar en el desempeño de las tareas al mismo tiempo que se implementa un método para minimizar posibles errores en el manejo del robot mediante un control visual. A través de la información proporcionada por el sistema de eyetracking, el usuario será capaz de interactuar con el sistema para seleccionar el objeto deseado, indicar la intención de cogerlo o incluso abortar la ejecución. El sistema incorpora un sistema de tracking 3D para conocer la ubicación de los objetos con respecto al manipulador robótico. Este sistema nos sirve tanto para definir la posición que debe alcanzar el robot, como para corregir las posibles desviaciones durante la ejecución de la trayectoria.Este trabajo ha sido financiado por la Comisión Europea a través del proyecto AIDE: Adaptive Multimodal Interfaces to AssistDisabled People in Daily Activities (Grant agreementno: 645322) y por el Ministerio de Economía y Competitividad a través del proyecto DPI2015-70415-C2-2-Rhttps://doi.org/10.17979/spudc.978849749808
When Playing Is a Problem: An Atypical Case of Alien Hand Syndrome in a Professional Pianist
Distributed Smart Device for Monitoring, Control and Management of Electric Loads in Domotic Environments
This paper presents a microdevice for monitoring, control and management of electric loads at home. The key idea is to compact the electronic design as much as possible in order to install it inside a Schuko socket. Moreover, the electronic Schuko socket (electronic microdevice + Schuko socket) has the feature of communicating with a central unit and with other microdevices over the existing powerlines. Using the existing power lines, the proposed device can be installed in new buildings or in old ones. The main use of this device is to monitor, control and manage electric loads to save energy and prevent accidents produced by different kind of devices (e.g., iron) used in domestic tasks. The developed smart device is based on a single phase multifunction energy meter manufactured by Analog Devices (ADE7753) to measure the consumption of electrical energy and thento transmit it using a serial interface. To provide current measurement information to the ADE7753, an ultra flat SMD open loop integrated circuit current transducer based on the Hall effect principle manufactured by Lem (FHS-40P/SP600) has been used. Moreover, each smart device has a PL-3120 smart transceiver manufactured by LonWorks to execute the user’s program, to communicate with the ADE7753 via serial interface and to transmit information to the central unit via powerline communication. Experimental results show the exactitude of the measurements made using the developed smart device
Auto-adaptative Robot-aided Therapy based in 3D Virtual Tasks controlled by a Supervised and Dynamic Neuro-Fuzzy System
This paper presents an application formed by a
classification method based on the architecture of ART neural
network (Adaptive Resonance Theory) and the Fuzzy Set Theory
to classify physiological reactions in order to automatically and
dynamically adapt a robot-assisted rehabilitation therapy to the
patient needs, using a three-dimensional task in a virtual reality
system. Firstly, the mathematical and structural model of the
neuro-fuzzy classification method is described together with the
signal and training data acquisition. Then, the virtual designed
task with physics behavior and its development procedure are
explained. Finally, the general architecture of the
experimentation for the auto-adaptive therapy is presented using
the classification method with the virtual reality exercise
Customizable Optical Force Sensor for Fast Prototyping and Cost-Effective Applications
This paper presents the development of an optical force sensor architecture directed to prototyping and cost-effective applications, where the actual force requirements are still not well defined or the most suitable commercial technologies would highly increase the cost of the device. The working principle of this sensor consists of determining the displacement of a lens by measuring the distortion of a refracted light beam. This lens is attached to an elastic interface whose elastic constant is known, allowing the estimation of the force that disturbs the optical system. In order to satisfy the requirements of the design process in an inexpensive way, this sensor can be built by fast prototyping technologies and using non-optical grade elements. To deal with the imperfections of this kind of manufacturing procedures and materials, four fitting models are proposed to calibrate the implemented sensor. In order to validate the system, two different sensor implementations with measurement ranges of ±45 N and ±10 N are tested with the proposed models, comparing the resulting force estimation with respect to an industrial-grade load cell. Results show that all models can estimate the loads with an error of about 6% of the measurement range