Characterisation of Tactile Sensors based on Fibre Bragg gratings Towards Temperature Independent Pressure Sensing

AbstractThis paper presents the development of flexible pressure sensing sheets, based on fibre Bragg grating sensing elements. The devices feature optical wavelength-encoded sensing signals and show promise in applications such as pressure mapping and tactile sensing. FBGs inscribed in highly-birefringent microstructured fibres, reflecting two separate Bragg peaks, are specially employed. Prototypes with FBGs embedded in polymer sheets were produced and characterised for temperature and pressure sensitivities. An improved sensor structure was implemented aiming at temperature independent tactile sensing with Bragg peak separation as the sensing signal

Challenges in the Fabrication of Biodegradable and Implantable Optical Fibers for Biomedical Applications

The limited penetration depth of visible light in biological tissues has encouraged researchers to develop novel implantable light-guiding devices. Optical fibers and waveguides that are made from biocompatible and biodegradable materials offer a straightforward but effective approach to overcome this issue. In the last decade, various optically transparent biomaterials, as well as different fabrication techniques, have been investigated for this purpose, and in view of obtaining fully fledged optical fibers. This article reviews the state-of-the-art in the development of biocompatible and biodegradable optical fibers. Whilst several reviews that focus on the chemical properties of the biomaterials from which these optical waveguides can be made have been published, a systematic review about the actual optical fibers made from these materials and the different fabrication processes is not available yet. This prompted us to investigate the essential properties of these biomaterials, in view of fabricating optical fibers, and in particular to look into the issues related to fabrication techniques, and also to discuss the challenges in the use and operation of these optical fibers. We close our review with a summary and an outline of the applications that may benefit from these novel optical waveguides

Distributed hydrostatic pressure measurement using phase OTDR in a highly birefringent photonic crystal fiber

Although distributed fiber-optic sensing of axial strain and temperature is a well-established technique, there are almost no demonstrations of distributed hydrostatic pressure sensing. The main obstacle for such measurements is the low sensitivity to pressure of standard optical fibers. Structured fibers, such as photonic crystal fibers can be made pressure-sensitive by means of an optimized arrangement of their internal microstructure. In this paper, we demonstrate - for the first time to our knowledge - distributed birefringence and hydrostatic pressure measurements based on phase sensitive optical time-domain reflectometry (OTDR) in highly birefringent photonic crystal fibers. We study the response to hydrostatic pressure of two dedicated pressure-sensitive photonic crystal fibers in the range from ∼0.8 bar to ∼67 bar with a 5 cm spatial resolution using a phase-OTDR approach. We find differential pressure sensitivities between the slow and fast polarization axes of the studied fibers of -219 MHz/bar and -95.4 MHz/bar. These values are ∼3.8 to ∼8.8 times larger than those demonstrated previously in distributed pressure measurements with other photonic crystal fibers

Optical fiber sensors embedded in flexible polymer foils

In traditional electrical sensing applications, multiplexing and interconnecting the different sensing elements is a major challenge. Recently, many optical alternatives have been investigated including optical fiber sensors of which the sensing elements consist of fiber Bragg gratings. Different sensing points can be integrated in one optical fiber solving the interconnection problem and avoiding any electromagnetical interference (EMI). Many new sensing applications also require flexible or stretchable sensing foils which can be attached to or wrapped around irregularly shaped objects such as robot fingers and car bumpers or which can even be applied in biomedical applications where a sensor is fixed on a human body. The use of these optical sensors however always implies the use of a light-source, detectors and electronic circuitry to be coupled and integrated with these sensors. The coupling of these fibers with these light sources and detectors is a critical packaging problem and as it is well-known the costs for packaging, especially with optoelectronic components and fiber alignment issues are huge. The end goal of this embedded sensor is to create a flexible optical sensor integrated with (opto)electronic modules and control circuitry. To obtain this flexibility, one can embed the optical sensors and the driving optoelectronics in a stretchable polymer host material. In this article different embedding techniques for optical fiber sensors are described and characterized. Initial tests based on standard manufacturing processes such as molding and laser structuring are reported as well as a more advanced embedding technique based on soft lithography processing

Internal strain monitoring in composite materials with embedded photonic crystal fiber Bragg gratings

The possibility of embedding optical fiber sensors inside carbon fiber reinforced polymer (CFRP) for structural health monitoring purposes has already been demonstrated previously. So far however, these sensors only allowed axial strain measurements because of their low sensitivity for strain in the direction perpendicular to the optical fiber's axis. The design flexibility provided by novel photonic crystal fiber (PCF) technology now allows developing dedicated fibers with substantially enhanced sensitivity to such transverse loads. We exploited that flexibility and we developed a PCF that, when equipped with a fiber Bragg grating (FBG), leads to a sensor that allows measuring transverse strains in reinforced composite materials, with an order of magnitude increase of the sensitivity over the state-of-the-art. In addition it allows shear strain sensing in adhesive bonds, which are used in composite repair patches. This is confirmed both with experiments and finite element simulations on such fibers embedded in CFRP coupons and adhesive bonds. Our sensor brings the achievable transverse strain measurement resolution close to a target value of 1 mu strain and could therefore play an important role for multi-dimensional strain sensing, not only in the domain of structural health monitoring, but also in the field of composite material production monitoring. Our results thereby illustrate the added value that PCFs have to offer for internal strain measurements inside composite materials and structures

Photonic skins for optical sensing:highlights of the PHOSFOS project

PHOSFOS (Photonic Skins For Optical Sensing) is a research project funded by the European Commission's 7th Framework Programme. The project aims at developing a flexible and stretchable foil that integrates highly advanced optical fibre sensing elements as well as optical and electrical powering functionalities and read-out of the sensors. This skin-like foil can be wrapped around or attached to irregularly shaped objects or bodies and will allow quasi-distributed sensing of mechanical quantities such as deformation and pressure. The applications targeted can be found in the fields of structural health monitoring and healthcare

Thermal effects on the photoelastic coefficient of polymer optical fibers

We measure the radial profile of the photoelastic coefficient C(r) in single-mode polymer optical fibers (POFs), and we determine the evolution of C(r) after annealing the fibers at temperatures from 40°C to 80°C. We demonstrate that C(r) in the fibers drawn from a preform without specific thermal pre-treatment changes and converges to values between 1.2 and 1.6×10-12 Pa-1 following annealing at 80°C. The annealed fibers display a smoothened radial profile of C(r) and a lowered residual birefringence. In contrast, the mean value of C(r) of the fiber drawn from a preform that has been pre-annealed remains constant after our annealing process and is significantly higher, i.e., 4×10-12 Pa-1. The annealing process decreases the residual birefringence to a lower extent as well. These measurements indicate the impact of annealing on the thermal stability of the photoelastic coefficient of POFs, which is an essential characteristic in view of developing POF-based thermomechanical sensors

Microstructured optical fiber Bragg grating-based shear stress sensing in adhesive bonds

We present shear stress sensing with a Bragg grating sensor fabricated in a highly birefringent microstructured optical fiber. This sensor has a shear strain sensing resolution of 0.04 pm/mu epsilon when embedded in a shear loaded adhesive bond. We achieve discrete shear stress mapping in an adhesive bond by embedding a multitude of these sensors at different locations in the bond line. Experiments and numerical modeling show the limited influence of angular misalignment of the sensor on its shear stress response. Finally, we discuss the cross-sensitivity of this sensor to shear strain and temperature