Vapor phase Beckmann rearrangement using high silica zeolite catalyst

Vapor phase Beckmann rearrangement of cyclohexanone oxime to e-caprolactam has been studied using high silica zeolite catalysts. Catalysts with different crystal sizes and gel-ageing times have been activated by ionic exchange in different conditions by means of a highly basic solution and a nearly neutral solution both containing ammonium salts. Samples have been calcined at different temperatures in order modify the number of defective sites. We observed that samples exchanged by means of a highly basic solution (pH > 10)1,2 and calcined at a relatively lower temperature (450 C) show the most interesting catalytic results. X-ray powder diffraction patterns of these samples show2 retention of the unit cell symmetry (orthorhombic cell) if compared to the dried sample. NH3-TPD confirms the low acidity of high silica zeolites, however a higher amount of desorbed ammonia is observed for the samples exchanged at higher pH and calcined at 450 C. Due to silanol nests the IR spectra of the same samples show the formation of Si\u2013NH2 bonds which are absent in the same material exchanged by other methods. Such sites seem to promote the high stability of the high silica zeolite catalysts also to the regeneration which is needed to remove the heavy carbonaceous compounds from the catalyst surface

Good manufacturing practices in autologous chondrocyte implantation: the experience in a public hospital

n/

Aquivion® PFSA-based spray-freeze dried composite materials with SiO2 and TiO2 as hybrid catalysts for the gas phase dehydration of ethanol to ethylene in mild conditions

Aquivion PFSA resin, a perfluorinated ion-exchange polymer, has been used as a heterogeneous strong acid catalyst for a range of reactions; however, the activity of this material is limited due to the extremely low surface area of the polymer. In this paper we described the one-step synthesis of Aquivion® PFSA-based hybrid materials using heterocoagulation and spray-freeze-drying of sols containing the precursor of the active phases. The intimated encapsulation of different nano-oxides, such as TiO2 and SiO2 in the superacid resin matrix was easily obtained using this technique and compared with similar catalysts prepared by the impregnation conventional route. The approach led to the preparation of porous micro-granules characterised by a high homogeneity in the phase distribution and high surface area. The prepared materials were active and selective for the gas phase dehydration of ethanol to ethylene in mild conditions. The increase of the porosity improved the activity of the composites, compared to the pure Aquivion® PFSA, and allowed to reduce the amount of the superacid resin. Moreover, the type of encapsulated oxide, TiO2 or SiO2, modified the improved performance of the catalysts, having TiO2 the higher efficiency for ethanol conversion and selectivity in ethylene at very low temperature

Capsaicin 8% dermal patch in clinical practice: an expert opinion

Introduction: Neuropathic pain (NP) is caused by a lesion or disease of the somatosensory system, which can severely impact patients’ quality of life. The current-approved treatments for NP comprise of both centrally acting agents and topical drugs, including capsaicin 8% dermal patches, which is approved for the treatment of peripheral NP. / Areas covered: The authors summarize literature data regarding capsaicin use in patients who suffer from NP and discuss the clinical applications of this topical approach. / Expert opinion: Overall, the capsaicin 8% dermal patch is as effective in reducing pain intensity as other centrally active agents (i.e. pregabalin). Some studies have also reported fewer systemic side effects, a faster onset of action and superior treatment satisfaction compared with systemic agents. In our opinion, capsaicin 8% dermal patches also present additional advantages, such as a good systemic tolerability, the scarcity of adverse events, the possibility to combine it with other agents, and a good cost-effective profile. It is important to note that, as the mechanism of action of capsaicin 8% is the ‘defunctionalization’ of small afferent fibers through interaction with TRPV1 receptors, the peripheral expression of this receptor on nociceptor fibers, is crucial to predict patient’s response to treatment

Evaluation of macular pigment optical density following femtosecond laser-assisted cataract surgery

Background: To evaluate macular pigment optical density (MPOD) after bimanual femtosecond laser-assisted cataract surgery (FLACS) compared to standard bimanual phacoemulsification (B-MICS). Methods: Aprospective, casematched, comparative cohort study conducted at theInstitute of Ophthalmology, University of Modena and Reggio Emilia (Italy); 30 eyes under wentbimanual FLACS with low-energy Ziemer LDV Z8 (FLACS) and 30 underwent B-MICS standard technique (B-MICS). All interventions were conducted by the same expert surgeon. MPOD using the Macular Pigment Screener II (MPS II) was evaluated at baseline, 7 and 30 days after surgery. As secondary outcomes, we considered best corrected visual acuity (BCVA) and central macular thickness (CMT) obtained using optical coherence tomography. Results: In all cases, a BunnyLens AF IOL was safely implanted in the capsular bag through a1.4 mm incision. We found asignificant reductionin MPOD in both groups at 7 and 30 days; 0.16 ±0.14 and 0.10±0.12 (FLACS) and 0.18±0.13 and 0.15±0.14 (B-MICS), respectively (P<0.05). However, there was no significant difference between the two groups at either 7 (P=0.52) or 30 days (P=0.18). BCVA improved significantly in both groups and CMT increased in both groups (P<0.001, P<0.001, respectively). BCVA and CMT were similar between the groups with a significant difference in CMT in favor of the FLACS group at 30 days (P=0.017). Conclusions: MPOD was reduced in both groups without any significant difference between the FLACS and B-MICS cataract interventions. FLACS is associated with a significantly higher increase of macular thickness at 30 days compared to B-MICS

Synergic combination of the sol-gel method with dip coating for plasmonic devices

Biosensing technologies based on plasmonic nanostructures have recently attracted significant attention due to their small dimensions, low-cost and high sensitivity but are often limited in terms of affinity, selectivity and stability. Consequently, several methods have been employed to functionalize plasmonic surfaces used for detection in order to increase their stability. Herein, a plasmonic surface was modified through a controlled, silica platform, which enables the improvement of the plasmonic-based sensor functionality. The key processing parameters that allow for the fine-tuning of the silica layer thickness on the plasmonic structure were studied. Control of the silica coating thickness was achieved through a combined approach involving sol-gel and dip-coating techniques. The silica films were characterized using spectroscopic ellipsometry, contact angle measurements, atomic force microscopy and dispersive spectroscopy. The effect of the use of silica layers on the optical properties of the plasmonic structures was evaluated. The obtained results show that the silica coating enables surface protection of the plasmonic structures, preserving their stability for an extended time and inducing a suitable reduction of the regeneration time of the chip

Efficient low-loaded ternary Pd-In2O3-Al2O3 catalysts for methanol production

Pd-In2O3 catalysts are among the most promising alternatives to Cu-ZnO-Al2O3 for synthesis of CH3OH from CO2. However, the intrinsic activity and stability of In2O3 per unit mass should be increased to reduce the content of this scarcely available element and to enhance the catalyst lifetime. Herein, we pro -pose and demonstrate a strategy for obtaining highly dispersed Pd and In2O3 nanoparticles onto an Al2O3 matrix by a one-step coprecipitation followed by calcination and activation. The activity of this catalyst is comparable with that of a Pd-In2O3 catalyst (0.52 vs 0.55 gMeOH h-1 gcat-1 at 300 & DEG;C, 30 bar, 40,800 mL h-1 gcat-1 ) but the In2O3 loading decreases from 98 to 12 wt% while improving the long-term stability by three-fold at 30 bar. In the new Pd-In2O3-Al2O3 system, the intrinsic activity of In2O3 is highly increased both in terms of STY normalized to In specific surface area and In2O3 mass (4.32 vs 0.56 g gMeOH h-1 gIn2O3-1 of a Pd-In2O3 catalyst operating at 300 & DEG;C, 30 bar, 40,800 mL h-1 gcat-1).The combination of ex situ and in situ catalyst characterizations during reduction provides insights into the interaction between Pd and In and with the support. The enhanced activity is likely related to the close proximity of Pd and In2O3, wherein the H2 splitting activity of Pd promotes, in combination with CO2 activation over highly dispersed In2O3 particles, facile formation of CH3OH