Adapting data collection methods in the Australian life histories and health survey: a retrospective life course study

OBJECTIVE Ideally, life course data are collected prospectively through an ongoing longitudinal study. We report adaptive multimethod fieldwork procedures that gathered life history data by mail survey and telephone interview, comparable with the face-to-face methods employed in the English Longitudinal Study on Ageing (ELSA). DESIGN The Australian Life Histories and Health (LHH) Survey was a substudy of the Australian 45 and Up Study, with data collection methods modified from the ELSA Study. A self-complete questionnaire and life history calendar were completed by the participants, followed by a computer-assisted telephone interview recording key life events. RESULTS The LHH survey developed and tested procedures and instruments that gathered rich life history data within an ongoing Australian longitudinal survey on ageing. Data collection proved to be economical. The use of a self-complete questionnaire in conjunction with a life history calendar and coordinated computer-assisted telephone interview was successful in collecting retrospective life course information, in terms of being thorough, practical and efficient. This study has a diverse collection of data covering the life course, starting with early life experiences and continuing with socioeconomic and health exposures and outcomes during adult life. CONCLUSIONS Mail and telephone methodology can accurately and economically add a life history dimension to an ongoing longitudinal survey. The method is particularly valuable for surveying widely dispersed populations. The results will facilitate understanding of the social determinants of health by gathering data on earlier life exposures as well as comparative data across geographical and societal contexts.Supported by an Australian Research Council Grant (DP 1096778, “Socio-economic determinants and health inequalities over the life-course: Australian and English comparisons”) with investigators from the Universities of Sydney, Newcastle and Queensland (Australia) and the University of Manchester (UK)

Rigorous Formulation of Duality in Gravitational Theories

In this paper we evince a rigorous formulation of duality in gravitational theories where an Einstein like equation is valid, by providing the conditions under which the Hodge duals (with respect to the metric tensor g) of T^a and R_b^a may be considered as the torsion and curvature 2-forms associated with a connection D', part of a Riemann-Cartan structure (M,g',D'), in the cases g = g' and g does not equal g', once T^a and R_b^a are the torsion and curvature 2-forms associated with a connection D part of a Riemann-Cartan structure (M,g,D). A new form for the Einstein equation involving the dual of the Riemann tensor of D is also provided, and the result is compared with others appearing in the literature.Comment: 15 page

Structural changes in FeOx/γ-Al2O3 catalysts during ethylbenzene dehydrogenation

The structural changes that occur in a FeOx/γ-Al2O3 catalyst during the dehydrogenation of ethylbenzene in a fluidized CREC Riser Simulator have been investigated. Chemical and morphological changes are observed to take place as a result of reaction. Electron microscopy reveals the formation of needle-like alumina structures apparently enclosing iron oxide particles. The formation of such structures at relatively low temperatures is unexpected and has not previously been reported. Additionally, X-ray diffraction and Mössbauer spectroscopy confirmed the reduction of the oxidation state of iron, from Fe2O3 (haematite) to Fe3O4 (magnetite). Iron carbides, Fe3C and ɛ-Fe2C, were detected by electron microscopy through electron diffraction and lattice fringes analysis. Carbon deposition (coking) on the catalyst surface also occurs. The observed structural changes are likely to be closely correlated with the catalytic properties of the materials, in particular with catalyst deactivation, and thereby provide important avenues for future study of this industrially important reaction. Fe2O3/Al2O3 catalyst undergoes chemical and morphological changes during ethylbenzene dehydrogenation forming Al2O3 needles which appear to contain reduced Fe3O4 particles. Fe3C also forms during reaction

Oil Control Ring Friction And Low Viscosity Lubricants: A Combined Numerical and Experimental Analysis

A common strategy to reduce engine parasitic power losses is to decrease pumping and viscous friction losses through use of a low viscosity engine oil. However, reducing lubricant viscosity can also decrease the contact load carrying capacity, thus exacerbating direct interaction of contacting surfaces. This leads to boundary frictional losses in contacts prone to mixed regime lubrication. As a result, detailed experimental and modelling studies of engine component frictional behaviour is required to ensure the engine level trade-offs. This paper presents a combined experimental and numerical investigation of frictional behaviour of three-piece piston oil control rings. A bespoke tribometer replicates kinematics of the contact between a full oil control ring and the cylinder liner. The three-piece oil control ring is composed of two segments, separated by a waveform type expander. The experimental results indicate the dominance of mixed regime of lubrication throughout the stroke. This is particularly the case when the experiments are conducted at 80 °C; a typical engine sump temperature, when compared with the case of 20 °C (a typical engine start-up temperature in the UK in the Spring). A mixed hydrodynamic numerical model of the oil control ring-cylinder liner tribological interface is employed to apportion frictional contributions with their physical underlying mechanisms. The combined experimental-predictive approach provides key information for engine designers when considering the efficiency trade-offs

Dutch translation and cross-cultural validation of the Adult Social Care Outcomes Toolkit (ASCOT)

Background: The Adult Social Care Outcomes Toolkit was developed to measure outcomes of social care in England. In this study, we translated the four level self-completion version (SCT-4) of the ASCOT for use in the Netherlands and performed a cross-cultural validation. Methods: The ASCOT SCT-4 was translated into Dutch following international guidelines, including two forward and back translations. The resulting version was pilot tested among frail older adults using think-aloud interviews. Furthermore, using a subsample of the Dutch ACT-study, we investigated test-retest reliability and construct validity and compared response distributions with data from a comparable English study. Results: The pilot tests showed that translated items were in general understood as intended, that most items were reliable, and that the response distributions of the Dutch translation and associations with other measures were comparable to the original English version. Based on the results of the pilot tests, some small modifications and a revision of the Dignity items were proposed for the final translation, which were approved by the ASCOT development team. The complete original English version and the final Dutch translation can be obtained after registration on the ASCOT website (http://www.pssru.ac.uk/ascot). Conclusions: This study provides preliminary evidence that the Dutch translation of the ASCOT is valid, reliable and comparable to the original English version. We recommend further research to confirm the validity of the modified Dutch ASCOT translation

Determination of Debye Temperatures and Lamb-Mössbauer Factors for LnFeO3 Orthoferrite Perovskites (Ln = La, Nd, Sm, Eu, Gd)

Lanthanide orthoferrites have wide-ranging industrial uses including solar, catalytic and electronic applications. Here a series of lanthanide orthoferrite perovskites, LnFeO3 (Ln = La; Nd; Sm; Eu; Gd), prepared through a standard stoichiometric wet ball milling route using oxide precursors, has been studied. Characterisation through X-ray diffraction and X-ray fluorescence confirmed the synthesis of phase-pure or near-pure LnFeO3 compounds. 57Fe Mössbauer spectroscopy was performed over a temperature range of 10 K to 293 K to observe hyperfine structure and to enable calculation of the recoil-free fraction and Debye temperature (θD) of each orthoferrite. Debye temperatures (Ln = La 474 K; Nd 459 K; Sm 457 K; Eu 452 K; Gd 473 K) and recoil-free fractions (Ln = La 0.827; Nd 0.817; Sm 0.816; Eu 0.812; Gd 0.826) were approximated through minimising the difference in the temperature dependent experimental Centre Shift (CS) and theoretical Isomer Shift (IS), by allowing the Debye temperature and Isomer Shift values to vary. This method of minimising the difference between theoretical and actual values yields Debye temperatures consistent with results from other studies determined through thermal analysis methods. This displays the ability of variable-temperature Mössbauer spectroscopy to approximate Debye temperatures and recoil-free fractions, whilst observing temperature induced transitions over the temperature range observed. X-ray diffraction and Rietveld refinement show an inverse relationship between FeO6 octahedral volume and approximated Debye temperatures. Raman spectroscopy show an increase in the band positions attributed to soft modes of Ag symmetry, Ag(3) and Ag(5) from La to GdFeO3 corresponding to octahedral rotations and tilts in the [010] and [101] planes respectively

Low-temperature and purification-free stereocontrolled ring-opening polymerisation of lactide in supercritical carbon dioxide

A stereoselective, solvent-free ring-opening polymerisation (ROP) of lactide (LA) in supercritical carbon dioxide (scCO2) is reported for the first time. The key aim is to exploit scCO2 to lower the temperature of traditional melt polymerisations, lowering the energy requirement and leading to cleaner polymeric materials. We have utilised a zirconium amine-trisphenolate initiator-stereoselective catalyst [(iPrO)Zr(OPh(tBu)2-CH2)3N] to yield highly heterotactic poly(lactide) (PLA) homopolymer (Pr = 0.74–0.84) from rac-LA, demonstrating control of the PLA microstructure in scCO2. In addition, high monomer conversion (86–93%) was achieved in short reaction time (1 h), affording poly(lactide) with a very low degree of transesterification and narrow molecular weight distribution. Most importantly, all the reactions were performed at only 80 °C, almost 100 °C lower than the conventional melt process (typically performed at 130–180 °C), representing a very significant potential energy saving

Factor structure and construct validity of the Adult Social Care Outcomes Toolkit for Carers (ASCOT-Carer)

Background: The ASCOT-Carer is a self-report instrument designed to measure social care-related quality of life (SCRQoL). This article presents the psychometric testing and validation of the ASCOT-Carer four response-level interview (INT4) in a sample of unpaid carers of adults who receive publicly-funded social care services in England. Methods: Unpaid carers were identified through a survey of users of publicly-funded social care services in England. 387 carers completed a face-to-face or telephone interview. Data on variables hypothesised to be related to SCRQoL (for example, characteristics of the carer, cared-for person and care situation) and measures of carer experience, strain, health-related quality of life and overall QoL were collected. Relationships between these variables and overall SCRQoL score were evaluated through correlation, ANOVA and regression analysis to test the construct validity of the scale. Internal reliability was assessed using Cronbach’s alpha and feasibility by the number of missing responses. Results: The construct validity was supported by statistically significant relationships between SCRQoL and scores on instruments of related constructs, as well as with characteristics of the carer and care recipient in univariate and multivariate analyses. A Cronbach’s alpha of 0.87 (7 items) indicates that the internal reliability of the instrument is satisfactory and a low number of missing responses (<1%) indicates a high level of acceptance. Conclusions: The results provide evidence to support the construct validity, factor structure, internal reliability and feasibility of the ASCOT-Carer INT4 as an instrument for measuring social care-related quality of life of unpaid carers who care for adults with a variety of long-term conditions, disability or problems related to old age

Soft Chemical Control of Superconductivity in Lithium Iron Selenide Hydroxides Li1–x_{1–x}Fex_x(OH)Fe1–y_{1–y}Se

Hydrothermal synthesis is described of layered lithium iron selenide hydroxides Li$_{1–x}$Fex(OH)Fe$_{1–y}$Se (x$\sim$0.2; 0.02 < $y$ < 0.15) with a wide range of iron site vacancy concentrations in the iron selenide layers. This iron vacancy concentration is revealed as the only significant compositional variable and as the key parameter controlling the crystal structure and the electronic properties. Single crystal X-ray diffraction, neutron powder diffraction, and X-ray absorption spectroscopy measurements are used to demonstrate that superconductivity at temperatures as high as 40 K is observed in the hydrothermally synthesized samples when the iron vacancy concentration is low ($y$ < 0.05) and when the iron oxidation state is reduced slightly below +2, while samples with a higher vacancy concentration and a correspondingly higher iron oxidation state are not superconducting. The importance of combining a low iron oxidation state with a low vacancy concentration in the iron selenide layers is emphasized by the demonstration that reductive postsynthetic lithiation of the samples turns on superconductivity with critical temperatures exceeding 40 K by displacing iron atoms from the Li$_{1–x}$Fe$_x$(OH) reservoir layer to fill vacancies in the selenide layer