An Analysis of the Fractional Distribution of the Substantial Composition of Limonitic Nickel Ore from Punta Gorda, Moa, Holguin, Cuba

This paper evaluates the mass and content distribution of the lateritic ore supplied to the Caron process in Moa, Cuba. The description of the most contrasting physical properties, particle size and magnetic susceptibility with the use of fractional analysis methods was done. The products of fractional analysis were further set to the analytical techniques of X-Ray Fluorescence (XRF), powder X-Ray Diffraction (XRD) and Atomic Absorption to determine the metallic and mineralogical phases. Statistical approaches were also used to validate the distribution functions. As a result of the research, the regularities of mass and content distribution of the following phases were determined: Ni, Co, Fe, Al, Mg, SiO, Mn and Cr. In addition, the joint fractional distribution functions that describe the mass and content of the aforementioned physical properties were found; an aspect that may allow for the possibility of identifying the particles according to the physical properties under study. These results may add up to the new knowledge about the possibilities of pre-concentration by elimination of components that do not have metal values of interest in the Caron process. Keywords: Theory of Separation, Fractional Distribution Function, Laterite, Nicke

Intrinsic decoherence and classical-quantum correspondence in two coupled delta-kicked rotors

We show that classical-quantum correspondence of center of mass motion in two coupled delta-kicked rotors can be obtained from intrinsic decoherence of the system itself which occurs due to the entanglement of the center of mass motion to the internal degree of freedom without coupling to external environment

Statistics of Lyapunov exponent in one-dimensional layered systems

Localization of acoustic waves in a one dimensional water duct containing many randomly distributed air filled blocks is studied. Both the Lyapunov exponent and its variance are computed. Their statistical properties are also explored extensively. The results reveal that in this system the single parameter scaling is generally inadequate no matter whether the frequency we consider is located in a pass band or in a band gap. This contradicts the earlier observations in an optical case. We compare the results with two optical cases and give a possible explanation of the origin of the different behaviors.Comment: 6 pages revtex file, 6 eps figure

Delocalization and spin-wave dynamics in ferromagnetic chains with long-range correlated random exchange

We study the one-dimensional quantum Heisenberg ferromagnet with exchange couplings exhibiting long-range correlated disorder with power spectrum proportional to $1/k^{\alpha}$, where $k$ is the wave-vector of the modulations on the random coupling landscape. By using renormalization group, integration of the equations of motion and exact diagonalization, we compute the spin-wave localization length and the mean-square displacement of the wave-packet. We find that, associated with the emergence of extended spin-waves in the low-energy region for $\alpha > 1$, the wave-packet mean-square displacement changes from a long-time super-diffusive behavior for $\alpha <1$ to a long-time ballistic behavior for $\alpha > 1$. At the vicinity of $\alpha =1$, the mobility edge separating the extended and localized phases is shown to scale with the degree of correlation as $E_c\propto (\alpha -1)^{1/3}$.Comment: PRB to appea

FtsZ-dependent elongation of a coccoid bacterium

A mechanistic understanding of the determination and maintenance of the simplest bacterial cell shape, a sphere, remains elusive compared with that of more complex shapes. Cocci seem to lack a dedicated elongation machinery, and a spherical shape has been considered an evolutionary dead-end morphology, as a transition from a spherical to a rod-like shape has never been observed in bacteria. Here we show that a Staphylococcus aureus mutant (M5) expressing the ftsZG193D allele exhibits elongated cells. Molecular dynamics simulations and in vitro studies indicate that FtsZG193D filaments are more twisted and shorter than wild-type filaments. In vivo, M5 cell wall deposition is initiated asymmetrically, only on one side of the cell, and progresses into a helical pattern rather than into a constricting ring as in wild-type cells. This helical pattern of wall insertion leads to elongation, as in rod-shaped cells. Thus, structural flexibility of FtsZ filaments can result in an FtsZ-dependent mechanism for generating elongated cells from cocci

Glucose consumption rate-dependent transcriptome profiling of Escherichia coli provides insight on performance as microbial factories

peer reviewedBACKGROUND: The modification of glucose import capacity is an engineering strategy that has been shown to improve the characteristics of Escherichia coli as a microbial factory. A reduction in glucose import capacity can have a positive effect on production strain performance, however, this is not always the case. In this study, E. coli W3110 and a group of four isogenic derivative strains, harboring single or multiple deletions of genes encoding phosphoenolpyruvate:sugar phosphotransferase system (PTS)-dependent transporters as well as non-PTS transporters were characterized by determining their transcriptomic response to reduced glucose import capacity. RESULTS: These strains were grown in bioreactors with M9 mineral salts medium containing 20 g/L of glucose, where they displayed specific growth rates ranging from 0.67 to 0.27 h-1, and specific glucose consumption rates (qs) ranging from 1.78 to 0.37 g/g h. RNA-seq analysis revealed a transcriptional response consistent with carbon source limitation among all the mutant strains, involving functions related to transport and metabolism of alternate carbon sources and characterized by a decrease in genes encoding glycolytic enzymes and an increase in gluconeogenic functions. A total of 107 and 185 genes displayed positive and negative correlations with qs, respectively. Functions displaying positive correlation included energy generation, amino acid biosynthesis, and sugar import. CONCLUSION: Changes in gene expression of E. coli strains with impaired glucose import capacity could be correlated with qs values and this allowed an inference of the physiological state of each mutant. In strains with lower qs values, a gene expression pattern is consistent with energy limitation and entry into the stationary phase. This physiological state could explain why these strains display a lower capacity to produce recombinant protein, even when they show very low rates of acetate production. The comparison of the transcriptomes of the engineered strains employed as microbial factories is an effective approach for identifying favorable phenotypes with the potential to improve the synthesis of biotechnological products. © 2022. The Author(s)

Spatial rigid-multi-body systems with lubricated spherical clearance joints : modeling and simulation

The dynamic modeling and simulation of spatial rigid-multi-body systems with lubricated spherical joints is the main purpose of the present work. This issue is of paramount importance in the analysis and design of realistic multibody mechanical systems undergoing spatial motion. When the spherical clearance joint is modeled as dry contact; i.e., when there is no lubricant between the mechanical elements which constitute the joint, a body-to-body (typically metal-to-metal) contact takes place. The joint reaction forces in this case are evaluated through a Hertzian-based contact law. A hysteretic damping factor is included in the dry contact force model to account for the energy dissipation during the contact process. The presence of a fluid lubricant avoids the direct metal-to-metal contact. In this situation, the squeeze film action, due to the relative approaching motion between the mechanical joint elements, is considered utilizing the lubrication theory associated with the spherical bearings. In both cases, the intra-joint reaction forces are evaluated as functions of the geometrical, kinematical and physical characteristics of the spherical joint. These forces are then incorporated into a standard formulation of the system’s governing equations of motion as generalized external forces. A spatial four bar mechanism that includes a spherical clearance joint is considered here as example. The computational simulations are carried out with and without the fluid lubricant, and the results are compared with those obtained when the system is modeled with perfect joints only. From the general results it is observed that the system’s performance with lubricant effect presents fewer peaks in the kinematic and dynamic outputs, when compared with those from the dry contact joint model.Fundação para a Ciência e a Tecnologia (FCT

An inflation model with large variations in spectral index

Recent fits of cosmological parameters by the Wilkinson Microwave Anisotropy Probe (WMAP) measurement favor a primordial scalar spectrum with varying index. This result, if stands, could severely constrain inflation model buildings. Most extant slow-roll inflation models allow for only a tiny amount of scale variations in the spectrum. We propose in this paper an extra-dimensional inflation model which is natural theoretically and can generate the required variations of the spectral index as implied by the WMAP for suitable choices of parameters.Comment: 5 pages, 3 figures, REVTeX 4. Comments on low CMB quadrupoles added; Version accepted for publication in Phys. Rev.

In situ degradability of corn stover and elephant-grass harvested at four stages of maturity

Among tropical forages, corn silage is largely used by farmers trying to explore the maximum genetic potential from the animals. However, other tropical forages, such as elephant-grass (Pennisetum purpureum), are more productive and therefore cheaper to use than corn silage. Our objective was to compare the in situ degradability of elephant-grass with that from corn hybrids, all harvested at four stages of maturity. The experimental design followed a randomized block design with nested subplots. Two corn hybrids: AG5011, ZN8392 were harvested with 25, 30, 35, and 40% dry matter (DM) in the whole plant, and separated in stem + leaf sheath + leaf blade (stover), and cobs. Elephant-grass was harvested with 30, 40, 50 and 60 days after a leveling cut. Dried and ground samples were incubated in nylon bags inside the rumen for 0, 6, 12, 24, 48 and 72 h to estimate the kinetics of ruminal DM and neutral detergent fiber (NDF) degradation. The advance of maturity increased the NDF and acid detergent fiber (ADF) content in elephant-grass, and reduced its DM degradability. However, maturity had little or no effect on fiber content and DM degradability of corn stover. Elephant-grass had a higher NDF degradability than corn stover, and there was no effect of maturity on NDF degradability of either elephant-grass or corn stover. Fiber degradability of elephant-grass was not worse than that of corn stover, and therefore the choice of forage should be made on economical analysis rather than assuming an intrinsic low production potential for elephant-grass based diets.Dentre as forragens, a silagem de milho é amplamente utilizada pelos fazendeiros que visam explorar o máximo do potencial genético dos animais. No entanto, outros volumosos tropicais como o capim-elefante (Pennisetum purpureum) são mais produtivos e, portanto, mais baratos do que a silagem de milho. Nosso objetivo foi comparar a degradabilidade in situ do capim-elefante com a degradabilidade de híbridos de milho, colhidos em quatro estágios de maturidade. O experimento seguiu um delineamento de blocos ao acaso com sub-parcelas. Dois híbridos de milho: AG5011 e ZN8392 foram colhidos com 25, 30, 35 e 40% matéria seca (MS) na planta toda e separados na fração colmo + bainha + folhas e espigas. Capim elefante foi colhido 30, 40, 50 e 60 dias após o corte de nivelamento. As amostras secas e trituradas foram incubadas no rúmen por 0, 6, 12, 24, 48 e 72 h para cálculo da cinética da degradação ruminal da MS e da fibra em detergente neutro (FDN). O avanço da maturidade aumentou os teores de FDN e fibra em detergente ácido (FDA) do capim elefante e reduziu a degradabilidade da MS. Entretanto, a maturidade teve pouco efeito sobre os teores de fibra e a degradabilidade da MS da fração planta dos híbridos de milho. O capim elefante apresentou maior degradabilidade da FDN do que híbridos de milho, e não houve efeito da maturidade sobre a degradabilidade da FDN das duas espécies. A degradabilidade da fibra de capim-elefante não é pior do que a de híbridos de milho e, portanto a escolha da forragem deve ser feita com base em análises econômicas ao invés de assumir um menor potencial de produção em dietas a base de capim elefante