11 research outputs found
Characteristics of the iron moment in Dy-Fe and Dy-FeCo amorphous alloys studied by X-ray magnetic circular dichroism
The local magnetic moment of Fe in Dy-Fe and Dy-FeCo amorphous alloys has been studied using X-ray absorption spectroscopy and X-ray magnetic circular dichroism (XMCD). The Fe orbital and spin magnetic moments have been obtained for a range of alloy compositions by applying the sum rules to the XMCD spectra. The room temperature variations of the average components of the Fe moments as a function of Dy concentration and with the substitution of Fe by Co have been determined. A sharp reversal of the total magnetic moment was found at 28 +/- 1 at% Dy for both alloys. (C) 2000 Elsevier Science B.V. All rights reserved
Substrate Mode-Integrated SPR Sensor
We present the design, implementation and characterisation of an integrated surface plasmon resonance (SPR) biosensor chip involving diffractive optical coupling elements avoiding the need of prism coupling. The integrated sensor chip uses the angular interrogation principle and includes two diffraction gratings and the SPR sensing zone. The theoretical design is presented as well as the fabrication process. Experimental results (response of a reference water droplet and phosphate-buffered saline/water kinetic) are presented and compared with those obtained with the classical Kretschmann prism coupling setup. We believe that this prism-free architecture is perfectly suitable for low-cost and reproducible SPR biochemical sensor chips since the sensing zone can be functionalised as any other oneINTERREG IV FW1.1.9 “Plasmobio
Isolating auroral FUV emission lines using compact, broadband instrumentation
Images of auroral emissions at far ultraviolet (FUV, 122–200 nm) wavelengths are useful tools with which to study magnetospheric–ionospheric coupling, as the scattered sunlight background in this region is low, allowing both dayside and nightside auroras to be imaged simultaneously. The ratio of intensities between certain FUV emission lines or regions can be used to characterise the precipitating particles responsible for auroral emissions, and hence is a useful diagnostic of magnetospheric dynamics. Here, we describe how the addition of simple transmission filters to a compact broadband imager design allows far ultraviolet emission ratios to be deduced while also providing large-scale instantaneous images of the aurora. The low mass and volume of such an instrument would make it well-suited for both small satellite Earth-orbiting missions and larger outer planet missions from which it could be used to characterise the tenuous atmospheres observed at several moons, as well as studying the auroral emissions of the gas giants. We present a study to investigate the accuracy of a technique to allow emission line ratio retrieval, as applied to the OI 130.4 nm and 135.6 nm emissions at Ganymede. The ratio of these emissions provides information about the atmospheric composition, specifically the relative abundances of O and O2. Using modelled FUV spectra representative of Ganymede׳s atmosphere, based on observations by the Hubble Space Telescope (HST) Space Telescope Imaging Spectrograph (STIS), we find that the accuracy of the retrieved ratios is a function of the magnitude of the ratio, with the best measurements corresponding to a ratio of ~1.
Optical modeling for the LiteBIRD Medium and High Frequency Telescope
LiteBIRD is the next-generation space mission for polarization-sensitive mapping of the Cosmic Microwave Background anisotropies, with observations covering the full sky in a wide frequency range (34-448 GHz) to ensure high-precision removal of polarized foregrounds. Its main goal is to constrain the contribution of primordial gravitational waves to the curly component of the CMB polarization pattern. The LiteBIRD Medium and High Frequency Telescope (MHFT) will observe the sky in the 89-448 GHz band. Its optical configuration features two separate dual-lens assemblies with 300mm and 200mm apertures, 28° fields of view and diffraction-limited imaging over the whole spectral range. Polarization modulation is achieved through the continuous spinning of a half-wave plate at the optical entrance of each system. The optical studies for MHFT focus on a refined modeling of the telescope elements (lenses, anti-reflection coatings, absorbers, interfaces) to assess their individual effects on the predicted optical behavior of the telescopes. Such studies will provide key inputs for end-To-end simulations and will inform the subsystem and system-level characterization to meet the stringent requirements set for the LiteBIRD success. We describe the progress in MHFT optical modeling and the ongoing efforts to reproduce full Medium Frequency Telescope (MFT) and High Frequency Telescope (HFT) beams for representative focal plane pixels down to the far-sidelobe angular region. Here, systematic effects due to challenging beam measurements and higher order optical coupling between the telescope and the surrounding structures are likely to affect the final level and shape of the beams and thus set compelling requirements for in-flight calibration and beam reconstruction
Optical modeling for the LiteBIRD Medium and High Frequency Telescope
International audienceLiteBIRD is the next-generation space mission for polarization-sensitive mapping of the Cosmic Microwave Background anisotropies, with observations covering the full sky in a wide frequency range (34-448 GHz) to ensure high-precision removal of polarized foregrounds. Its main goal is to constrain the contribution of primordial gravitational waves to the curly component of the CMB polarization pattern. The LiteBIRD Medium and High Frequency Telescope (MHFT) will observe the sky in the 89-448 GHz band. Its optical configuration features two separate dual-lens assemblies with 300mm and 200mm apertures, 28° fields of view and diffraction-limited imaging over the whole spectral range. Polarization modulation is achieved through the continuous spinning of a half-wave plate at the optical entrance of each system. The optical studies for MHFT focus on a refined modeling of the telescope elements (lenses, anti-reflection coatings, absorbers, interfaces) to assess their individual effects on the predicted optical behavior of the telescopes. Such studies will provide key inputs for end-to-end simulations and will inform the subsystem and system-level characterization to meet the stringent requirements set for the LiteBIRD success. We describe the progress in MHFT optical modeling and the ongoing efforts to reproduce full Medium Frequency Telescope (MFT) and High Frequency Telescope (HFT) beams for representative focal plane pixels down to the far-sidelobe angular region. Here, systematic effects due to challenging beam measurements and higher order optical coupling between the telescope and the surrounding structures are likely to affect the final level and shape of the beams and thus set compelling requirements for in-flight calibration and beam reconstruction
Design status of ASPIICS, an externally occulted coronagraph for PROBA-3
The “sonic region” of the Sun corona remains extremely difficult to observe with spatial resolution and sensitivity sufficient to understand the fine scale phenomena that govern the quiescent solar corona, as well as phenomena that lead to coronal mass ejections (CMEs), which influence space weather. Improvement on this front requires eclipse-like conditions over long observation times. The space-borne coronagraphs flown so far provided a continuous coverage of the external parts of the corona but their over-occulting system did not permit to analyse the part of the white-light corona where the main coronal mass is concentrated. The proposed PROBA-3 Coronagraph System, also known as ASPIICS (Association of Spacecraft for Polarimetric and Imaging Investigation of the Corona of the Sun), with its novel design, will be the first space coronagraph to cover the range of radial distances between ~1.15 and 3 solar radii where the magnetic field plays a crucial role in the coronal dynamics, thus providing continuous observational conditions very close to those during a total solar eclipse.
PROBA-3 is first a mission devoted to the in-orbit demonstration of precise formation flying techniques and technologies for future European missions, which will fly ASPIICS as primary payload. The instrument is distributed over two satellites flying in formation (approx. 150m apart) to form a giant coronagraph capable of producing a nearly perfect eclipse allowing observing the sun corona closer to the rim than ever before.
The coronagraph instrument is developed by a large European consortium including about 20 partners from 7 countries under the auspices of the European Space Agency. This paper is reviewing the recent improvements and design updates of the ASPIICS instrument as it is stepping into the detailed design phase
An Examination of Factors Affecting Perception of Workplace Discrimination
Discrimination, Racial minorities, Perceptions, Employment inequity,
Optical Characterization of OMT-Coupled TES Bolometers for LiteBIRD
International audienceFeedhorn- and orthomode transducer- (OMT) coupled transition edge sensor (TES) bolometers have been designed and micro-fabricated to meet the optical specifications of the LiteBIRD high frequency telescope (HFT) focal plane. We discuss the design and optical characterization of two LiteBIRD HFT detector types: dual-polarization, dual-frequency-band pixels with 195/280 GHz and 235/337 GHz band centers. Results show well-matched passbands between orthogonal polarization channels and frequency centers within 3% of the design values. The optical efficiency of each frequency channel is conservatively reported to be within the range 0.64-0.72, determined from the response to a cryogenic, temperature-controlled thermal source. These values are in good agreement with expectations and either exceed or are within 10% of the values used in the LiteBIRD sensitivity forecast. Lastly, we report a measurement of loss in Nb/SiN x/Nb microstrip at 100 mK and over the frequency range 200-350 GHz, which is comparable to values previously reported in the literature