Artificial vision by thermography : calving prediction and defect detection in carbon fiber reinforced polymer

La vision par ordinateur est un domaine qui consiste à extraire ou identifier une ou plusieurs informations à partir d’une ou plusieurs images dans le but soit d’automatiser une tache, soit de fournir une aide à la décision. Avec l’augmentation de la capacité de calcul des ordinateurs, la vulgarisation et la diversification des moyens d’imagerie tant dans la vie quotidienne, que dans le milieu industriel,ce domaine a subi une évolution rapide lors de dernières décennies. Parmi les différentes modalités d’imagerie pour lesquels il est possible d’utiliser la vision artificielle cette thèse se concentre sur l’imagerie infrarouge. Plus particulièrement sur l’imagerie infrarouge pour les longueurs d’ondes comprises dans les bandes moyennes et longues. Cette thèse se porte sur deux applications industrielles radicalement différentes. Dans la première partie de cette thèse, nous présentons une application de la vision artificielle pour la détection du moment de vêlage en milieux industriel pour des vaches Holstein. Plus précisément l’objectif de cette recherche est de déterminer le moment de vêlage en n’utilisant que des données comportementales de l’animal. À cette fin, nous avons acquis des données en continu sur différents animaux pendant plusieurs mois. Parmi les nombreux défis présentés par cette application l’un d’entre eux concerne l’acquisition des données. En effet, les caméras que nous avons utilisées sont basées sur des capteurs bolométriques, lesquels sont sensibles à un grand nombre de variables. Ces variables peuvent être classées en quatre catégories : intrinsèque, environnemental, radiométrique et géométrique. Un autre défit important de cette recherche concerne le traitement des données. Outre le fait que les données acquises utilisent une dynamique plus élevée que les images naturelles ce qui complique le traitement des données ; l’identification de schéma récurrent dans les images et la reconnaissance automatique de ces derniers grâce à l’apprentissage automatique représente aussi un défi majeur. Nous avons proposé une solution à ce problème. Dans le reste de cette thèse nous nous sommes penchés sur la problématique de la détection de défaut dans les matériaux, en utilisant la technique de la thermographie pulsée. La thermographie pulsée est une méthode très populaire grâce à sa simplicité, la possibilité d’être utilisée avec un grand nombre de matériaux, ainsi que son faible coût. Néanmoins, cette méthode est connue pour produire des données bruitées. La cause principale de cette réputation vient des diverses sources de distorsion auquel les cameras thermiques sont sensibles. Dans cette thèse, nous avons choisi d’explorer deux axes. Le premier concerne l’amélioration des méthodes de traitement de données existantes. Dans le second axe, nous proposons plusieurs méthodes pour améliorer la détection de défauts. Chaque méthode est comparée à plusieurs méthodes constituant l’état de l’art du domaine.Abstract Computer vision is a field which consists in extracting or identifying one or more information from one or more images in order either to automate a task or to provide decision support. With the increase in the computing capacity of computers, the popularization and diversification of imaging means, both in industry, as well as in everyone’s life, this field has undergone a rapid development in recent decades. Among the different imaging modalities for which it is possible to use artificial vision, this thesis focuses on infrared imaging. More particularly on infrared imagery for wavelengths included in the medium and long bands. This thesis focuses on two radically different industrial applications. In the first part of this thesis, we present an application of artificial vision for the detection of the calving moment in industrial environments for Holstein cows. More precisely, the objective of this research is to determine the time of calving using only physiological data from the animal. To this end, we continuously acquired data on different animals over several days. Among the many challenges presented by this application, one of them concerns data acquisition. Indeed, the cameras we used are based on bolometric sensors, which are sensitive to a large number of variables. These variables can be classified into four categories: intrinsic, environmental, radiometric and geometric. Another important challenge in this research concerns the processing of data. Besides the fact that the acquired data uses a higher dynamic range than the natural images which complicates the processing of the data; Identifying recurring patterns in images and automatically recognizing them through machine learning is a major challenge. We have proposed a solution to this problem. In the rest of this thesis we have focused on the problem of defect detection in materials, using the technique of pulsed thermography. Pulse thermography is a very popular method due toits simplicity, the possibility of being used with a large number of materials, as well as its low cost. However, this method is known to produce noisy data. The main cause of this reputation comes from the various sources of distortion to which thermal cameras are sensitive. In this thesis, we have chosen to explore two axes. The first concerns the improvement of existing data processing methods. In the second axis, we propose several methods to improve fault detection. Each method is compared to several methods constituting the state of the art in the field

Automated assessment and tracking of human body thermal variations using unsupervised clustering

The presented approach addresses a review of the overheating that occurs during radiological examinations, such as magnetic resonance imaging, and a series of thermal experiments to determine a thermally suitable fabric material that should be used for radiological gowns. Moreover, an automatic system for detecting and tracking of the thermal fluctuation is presented. It applies hue-saturated-value-based kernelled k-means clustering, which initializes and controls the points that lie on the region-of-interest (ROI) boundary. Afterward, a particle filter tracks the targeted ROI during the video sequence independently of previous locations of overheating spots. The proposed approach was tested during experiments and under conditions very similar to those used during real radiology exams. Six subjects have voluntarily participated in these experiments. To simulate the hot spots occurring during radiology, a controllable heat source was utilized near the subject’s body. The results indicate promising accuracy for the proposed approach to track hot spots. Some approximations were used regarding the transmittance of the atmosphere, and emissivity of the fabric could be neglected because of the independence of the proposed approach for these parameters. The approach can track the heating spots continuously and correctly, even for moving subjects, and provides considerable robustness against motion artifact, which occurs during most medical radiology procedures

Unsupervised automatic tracking of thermal changes in human body

An automated system for detecting and tracking of the thermal fluctuation in human body is addressed. It applies HSV based k-means clustering which initialized and controlled the points which lie on the ROI boundary. Afterward a particle filter tracked the targeted ROI in the thermal video stream. There were six subjects have voluntarily participated on these experiments. For simulating the hot spots occur during the some medical tests a controllable heater utilized close to the subjects body. The results indicated promising accuracy of the proposed approach for tracking the hot spots. However, there were some approximations (e.g. the transmittance of the atmosphere and emissivity of the fabric) which can be neglected because of independency of the proposed approach for these parameters. The approach can track the heating spots efficiently considering the movement in the subjects which provided a confidence of considerable robustness against motion-artifact usually occurs in the medical tests

Non-destructive investigation of paintings on canvas by continuous wave terahertz imaging and flash thermography

Terahertz (THz) imaging is increasingly used in the cultural heritage field. In particular, continuous wave (CW) and low frequency THz is attracting more attention. The first application of the THz technique inherent to the cultural heritage field dates back 10 years ago. Since 2006, tangible improvements have been conducted in the refinement of the technique, with the aim to produce clear maps useful for any art restorer. In this paper, a CW THz (0.1 THz) imaging system was used to inspect paintings on canvas both in reflection and in transmission modes. In particular, two paintings were analyzed: in the first one, similar materials and painting execution of the original artwork were used, while in the second one, the canvas layer is slightly different. Flash thermography was used herein together with the THz method in order to observe the differences in results for the textile support materials. A possible application of this method for the detection of artwork forgery requires some parameterization and analysis of various materials or thickness influence which will be addressed in a future study. In this work, advanced image processing techniques including principal component thermography (PCT) and partial least squares thermography (PLST) were used to process the infrared data. Finally, a comparison of CW THz and thermographic results was conducted

Sequential design of computer experiments for the estimation of a probability of failure

This paper deals with the problem of estimating the volume of the excursion set of a function $f:\mathbb{R}^d \to \mathbb{R}$ above a given threshold, under a probability measure on $\mathbb{R}^d$ that is assumed to be known. In the industrial world, this corresponds to the problem of estimating a probability of failure of a system. When only an expensive-to-simulate model of the system is available, the budget for simulations is usually severely limited and therefore classical Monte Carlo methods ought to be avoided. One of the main contributions of this article is to derive SUR (stepwise uncertainty reduction) strategies from a Bayesian-theoretic formulation of the problem of estimating a probability of failure. These sequential strategies use a Gaussian process model of $f$ and aim at performing evaluations of $f$ as efficiently as possible to infer the value of the probability of failure. We compare these strategies to other strategies also based on a Gaussian process model for estimating a probability of failure.Comment: This is an author-generated postprint version. The published version is available at http://www.springerlink.co

Les droits disciplinaires des fonctions publiques : « unification », « harmonisation » ou « distanciation ». A propos de la loi du 26 avril 2016 relative à la déontologie et aux droits et obligations des fonctionnaires

The production of tt‾ , W+bb‾ and W+cc‾ is studied in the forward region of proton–proton collisions collected at a centre-of-mass energy of 8 TeV by the LHCb experiment, corresponding to an integrated luminosity of 1.98±0.02 fb−1 . The W bosons are reconstructed in the decays W→ℓν , where ℓ denotes muon or electron, while the b and c quarks are reconstructed as jets. All measured cross-sections are in agreement with next-to-leading-order Standard Model predictions.The production of $t\overline{t}$, $W+b\overline{b}$ and $W+c\overline{c}$ is studied in the forward region of proton-proton collisions collected at a centre-of-mass energy of 8 TeV by the LHCb experiment, corresponding to an integrated luminosity of 1.98 $\pm$ 0.02 \mbox{fb}^{-1}. The $W$ bosons are reconstructed in the decays $W\rightarrow\ell\nu$, where $\ell$ denotes muon or electron, while the $b$ and $c$ quarks are reconstructed as jets. All measured cross-sections are in agreement with next-to-leading-order Standard Model predictions

Physics case for an LHCb Upgrade II - Opportunities in flavour physics, and beyond, in the HL-LHC era

The LHCb Upgrade II will fully exploit the flavour-physics opportunities of the HL-LHC, and study additional physics topics that take advantage of the forward acceptance of the LHCb spectrometer. The LHCb Upgrade I will begin operation in 2020. Consolidation will occur, and modest enhancements of the Upgrade I detector will be installed, in Long Shutdown 3 of the LHC (2025) and these are discussed here. The main Upgrade II detector will be installed in long shutdown 4 of the LHC (2030) and will build on the strengths of the current LHCb experiment and the Upgrade I. It will operate at a luminosity up to 2×1034 cm−2s−1, ten times that of the Upgrade I detector. New detector components will improve the intrinsic performance of the experiment in certain key areas. An Expression Of Interest proposing Upgrade II was submitted in February 2017. The physics case for the Upgrade II is presented here in more depth. CP-violating phases will be measured with precisions unattainable at any other envisaged facility. The experiment will probe b → sl+l−and b → dl+l− transitions in both muon and electron decays in modes not accessible at Upgrade I. Minimal flavour violation will be tested with a precision measurement of the ratio of B(B0 → μ+μ−)/B(Bs → μ+μ−). Probing charm CP violation at the 10−5 level may result in its long sought discovery. Major advances in hadron spectroscopy will be possible, which will be powerful probes of low energy QCD. Upgrade II potentially will have the highest sensitivity of all the LHC experiments on the Higgs to charm-quark couplings. Generically, the new physics mass scale probed, for fixed couplings, will almost double compared with the pre-HL-LHC era; this extended reach for flavour physics is similar to that which would be achieved by the HE-LHC proposal for the energy frontier

LHCb upgrade software and computing : technical design report

This document reports the Research and Development activities that are carried out in the software and computing domains in view of the upgrade of the LHCb experiment. The implementation of a full software trigger implies major changes in the core software framework, in the event data model, and in the reconstruction algorithms. The increase of the data volumes for both real and simulated datasets requires a corresponding scaling of the distributed computing infrastructure. An implementation plan in both domains is presented, together with a risk assessment analysis

Multidifferential study of identified charged hadron distributions in ZZ-tagged jets in proton-proton collisions at s=\sqrt{s}=13 TeV

Jet fragmentation functions are measured for the first time in proton-proton collisions for charged pions, kaons, and protons within jets recoiling against a $Z$ boson. The charged-hadron distributions are studied longitudinally and transversely to the jet direction for jets with transverse momentum 20 $< p_{\textrm{T}} < 100$ GeV and in the pseudorapidity range $2.5 < \eta < 4$. The data sample was collected with the LHCb experiment at a center-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 1.64 fb$^{-1}$. Triple differential distributions as a function of the hadron longitudinal momentum fraction, hadron transverse momentum, and jet transverse momentum are also measured for the first time. This helps constrain transverse-momentum-dependent fragmentation functions. Differences in the shapes and magnitudes of the measured distributions for the different hadron species provide insights into the hadronization process for jets predominantly initiated by light quarks.Comment: All figures and tables, along with machine-readable versions and any supplementary material and additional information, are available at https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2022-013.html (LHCb public pages