Micro-spectroscopy of Buried Short-Range Surface Plasmon Polaritons Supported by Thin Polycrystalline Gold Films

The dispersive properties of short-range surface plasmon polaritons are investigated at the buried interfaces in vacuum/Au/fused silica and vacuum/Au/SiO2/Si multilayer systems for different gold film thicknesses of up to 50 nm using two-photon photoemission electron microscopy. The experimental data agrees excellently with results of transfer matrix method simulations, emphasizing the sensitivity of the plasmonic wave vector to the thickness of the gold film and an ultrathin native substrate oxide layer. The results furthermore illustrate the exceptional qualification of low-energy electron photoemission techniques in studying electronic excitations at buried interfaces

PTFEP-Al2O3 hybrid nanowires reducing thrombosis and biofouling

Thrombosis and bacterial infection are major problems in cardiovascular implants. Here we demonstrated that a superhydrophobic surface composed of poly(bis(2,2,2-trifluoroethoxy)phosphazene) (PTFEP)-Al2O3 hybrid nanowires (NWs) is effective to reduce both platelet adhesion/activation and bacterial adherence/colonization. The proposed approach allows surface modification of cardiovascular implants which have 3D complex geometries. © 2019 The Royal Society of Chemistry

Marine Algae Incorporated Polylactide Acid Patch: Novel Candidate for Targeting Osteosarcoma Cells without Impairing the Osteoblastic Proliferation

Biodegradable collagen-based materials have been preferred as scaffolds and grafts for diverse clinical applications in density and orthopedy. Besides the advantages of using such bio-originated materials, the use of collagen matrices increases the risk of infection transmission through the cells or the tissues of the graft/scaffold. In addition, such collagen-based solutions are not counted as economically feasible approaches due to their high production cost. In recent years, incorporation of marine algae in synthetic polymers has been considered as an alternative method for preparation grafts/scaffolds since they represent abundant and cheap source of potential biopolymers. Current work aims to propose a novel composite patch prepared by blending Sargassum vulgare powders (SVP) to polylactide (PLA) as an alternative to the porcine-derived membranes. SVP-PLA composite patches were produced by using a modified solvent casting method. Following detailed material characterization to assess the cytocompatibility, human osteoblasts (HOBs) and osteosarcoma cells (SaOS-2) were seeded on neat PLA and SVP-PLA patches. MTT and BrdU assays indicated a greater cytocompatibility and higher proliferation for HOBs cultured on SVP-PLA composite than for those cultured on neat PLA. SaOS-2 cells cultured on SVP-PLA exhibited a significant decrease in cell proliferation. The composite patch described herein exhibits an antiproliferative effect against SaOS-2 cells without impairing HOBs' adhesion and proliferation

Acoustic attenuation spectroscopy and helium ion microscopy study of rehydration of dairy powder

Complete hydration is essential for the production of structured dairy products from powders. It is essential that the ingredients used hydrate completely. Determination of an end point of rehydration is non-trivial, but ultrasound-based methodologies have demonstrated potential in this area and are well suited to measuring bulk samples in situ. Here, acoustic attenuation spectroscopy (AAS) is used to monitor rehydration of skim milk powder, and recombined systems of micellar casein isolate with lactose and whey protein isolate. Dynamic light scattering, zeta-potential measurements and AAS as a function of pH characterise each component around its isoelectric point to assess its functionality. Scanning helium ion microscopy was used to image the dry powders, without any conductive coating, producing resolution equivalent to scanning electron microscopy, but with much larger focal lengths and fewer imaging artefacts. Imaging the powders provides information on particle size and morphology which can affect dissolution behaviour. Reconstituted skim milk powder and recombined samples were monitored showing there are changes occurring over several hours. Attenuation coefficients are shown to predict the end point of hydration. Model fitting is used to extract volume fractions and average particle sizes of large and small particle populations in recombined samples over time. AAS is demonstrated to be capable of tracking the dynamics in rehydrating dispersions over time. Physical parameters such as the volume fraction and particle size of the dispersed phase can be determined

Multicenter registry of Impella-assisted high-risk percutaneous coronary interventions and cardiogenic shock in Poland (IMPELLA-PL)

Background: Impella is a percutaneous mechanical circulatory support device for treatment of cardiogenic shock (CS) and high-risk percutaneous coronary interventions (HR-PCIs). IMPELLA-PL is a national retrospective registry of Impella-treated CS and HR-PCI patients in 20 Polish interventional cardiological centers, conducted from January 2014 until December 2021.Aims: We aimed to determine the efficacy and safety of Impella using real-world data from IMPELLA-PL and compare these with other registries.Methods: IMPELLA-PL data were analyzed to determine primary endpoints: in-hospital mortality and rates of mortality and major adverse cardiovascular and cerebrovascular events (MACCE) at 12 months post-discharge.Results: Of 308 patients, 18% had CS and 82% underwent HR-PCI. In-hospital mortality rates were 76.4% and 8.3% in the CS and HR-PCI groups, respectively. The 12-month mortality rates were 80.0% and 18.2%, and post-discharge MACCE rates were 9.1% and 22.5%, respectively. Any access site bleeding occurred in 30.9% of CS patients and 14.6% of HR-PCI patients, limb ischemia in 12.7% and 2.4%, and hemolysis in 10.9% and 1.6%, respectively.Conclusions: Impella is safe and effective during HR-PCIs, in accordance with previous registry analyses. The risk profile and mortality in CS patients were higher than in other registries, and the potential benefits of Impella in CS require investigation

Multidifferential study of identified charged hadron distributions in ZZ-tagged jets in proton-proton collisions at s=\sqrt{s}=13 TeV

Jet fragmentation functions are measured for the first time in proton-proton collisions for charged pions, kaons, and protons within jets recoiling against a $Z$ boson. The charged-hadron distributions are studied longitudinally and transversely to the jet direction for jets with transverse momentum 20 $< p_{\textrm{T}} < 100$ GeV and in the pseudorapidity range $2.5 < \eta < 4$. The data sample was collected with the LHCb experiment at a center-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 1.64 fb$^{-1}$. Triple differential distributions as a function of the hadron longitudinal momentum fraction, hadron transverse momentum, and jet transverse momentum are also measured for the first time. This helps constrain transverse-momentum-dependent fragmentation functions. Differences in the shapes and magnitudes of the measured distributions for the different hadron species provide insights into the hadronization process for jets predominantly initiated by light quarks.Comment: All figures and tables, along with machine-readable versions and any supplementary material and additional information, are available at https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2022-013.html (LHCb public pages