An Analysis of the Shapes of Interstellar Extinction Curves. VI. The Near-IR Extinction Law

We combine new HST/ACS observations and existing data to investigate the wavelength dependence of NIR extinction. Previous studies suggest a power-law form, with a "universal" value of the exponent, although some recent observations indicate that significant sight line-to-sight line variability may exist. We show that a power-law model provides an excellent fit to most NIR extinction curves, but that the value of the power, beta, varies significantly from sight line-to-sight line. Therefore, it seems that a "universal NIR extinction law" is not possible. Instead, we find that as beta decreases, R(V) [=A(V)/E(B-V)] tends to increase, suggesting that NIR extinction curves which have been considered "peculiar" may, in fact, be typical for different R(V) values. We show that the power law parameters can depend on the wavelength interval used to derive them, with the beta increasing as longer wavelengths are included. This result implies that extrapolating power law fits to determine R(V) is unreliable. To avoid this problem, we adopt a different functional form for NIR extinction. This new form mimics a power law whose exponent increases with wavelength, has only 2 free parameters, can fit all of our curves over a longer wavelength baseline and to higher precision, and produces R(V) values which are consistent with independent estimates and commonly used methods for estimating R(V). Furthermore, unlike the power law model, it gives R(V)'s that are independent of the wavelength interval used to derive them. It also suggests that the relation R(V) = -1.36 E(K-V)/E(B-V) - 0.79 can estimate R(V) to +/-0.12. Finally, we use model extinction curves to show that our extinction curves are in accord with theoretical expectations.Comment: To appear in the Astrophysical Journa

Intellectual Property Topics in Open University Distance-Taught Courses

Patents lie at the heart of engineering as a permanent and ongoing record of invention. We have taught the subject for about 5 years in both UG and PG courses, written from scratch owing to the absence of textbooks aimed specifically at engineers. Most practising engineers develop patent skills on the job rather than through conventional courses. But there is a need to present such courses as early as possible in the engineering curriculum, so that graduates have a flying start in their first employment

Determination of plasticity following deformation and welding of austenitic stainless steel

Intergranular strain has been associated with high-temperature cracking of welded pipework in 316H austenitic stainless steel material used in nuclear power plant heat exchangers. In this study, neutron diffraction has been used to study the development of intergranular strains in plastically-deformed and welded 316H stainless steel. Measurements have been made of the intergranular strain evolution with increasing plastic strain in base material, and correlated with further measurements made in samples extracted from welded pipes, where the pipes were welded following plastic deformation to different levels of plastic strain. Strong tensile strain evolution was seen on the compliant 200 grain family. The results were correlated with various proxy measures of plastic strain, including hardness and diffraction peak width, and excellent agreement was obtained

A recalibration of IUE NEWSIPS low dispersion data

While the low dispersion IUE NEWSIPS data products represent a significant improvement over original IUE SIPS data, they still contain serious systematic effects which compromise their utility for certain applications. We show that NEWSIPS low resolution data are internally consistent to only 10-15% at best, with the majority of the problem due to time dependent systematic effects. In addition, the NEWSIPS flux calibration is shown to be inconsistent by nearly 10%. We examine the origin of these problems and proceed to formulate and apply algorithms to correct them to ~ 3% level -- a factor of 5 improvement in accuracy. Because of the temporal systematics, transforming the corrected data to the IUE flux calibration becomes ambiguous. Therefore, we elect to transform the corrected data onto the HST FOS system. This system is far more self-consistent, and transforming the IUE data to it places data from both telescopes on a single system. Finally, we argue that much of the remaining 3% systematic effects in the corrected data is traceable to problems with the NEWSIPS intensity transformation function (ITF). The accuracy could probably be doubled by rederiving the ITF.Comment: Submitted to ApJ Supplement, 35 pages, 13 figures, LaTeX - AASTEX aas2pp4.st

Lessons from crossing symmetry at large N

20 pages, v2: Assumptions stated more clearly, version published in JHEPWe consider the four-point correlator of the stress tensor multiplet in N=4 SYM. We construct all solutions consistent with crossing symmetry in the limit of large central charge c ~ N^2 and large g^2 N. While we find an infinite tower of solutions, we argue most of them are suppressed by an extra scale \Delta_{gap} and are consistent with the upper bounds for the scaling dimension of unprotected operators observed in the numerical superconformal bootstrap at large central charge. These solutions organize as a double expansion in 1/c and 1/\Delta_{gap}. Our solutions are valid to leading order in 1/c and to all orders in 1/\Delta_{gap} and reproduce, in particular, instanton corrections previously found. Furthermore, we find a connection between such upper bounds and positivity constraints arising from causality in flat space. Finally, we show that certain relations derived from causality constraints for scattering in AdS follow from crossing symmetry.Peer reviewe

Effect of prior cold work on the mechanical properties of weldments

Heat exchanger units used in steam raising power plant are often manufactured using many metres of austenitic stainless steel tubes that have been plastically formed (bent and swaged) and welded into complex shapes. The amount of plastic deformation (pre-straining) before welding varies greatly. This has a significant effect on the mechanical properties of the welded tubes and on the final residual stress state after welding. The aim of the present work was to measure and understand the combined effects of pre-straining and welding on the properties and residual stress levels in stainless steel tubing weldments. Effects of plastic deformation were simulated by plastically straining three identical stainless steel tubes to different strain levels (0%, 10% and 20%). Then each tube was cut into two halves and welding back together. The variation in mechanical properties across weldments was measured using digital image correlation (DIC) and a series of strain gauges (SG). Residual stresses were measured on the 0% (undeformed) and 20% prestrained and welded tubes by neutron diffraction. It was found that the welding process had a marked effect on the tensile properties of parent material within 25mm of the weld centre-line. Evidence of cyclic strain hardening was observed in the tube that had not been pre-strained, and evidence of softening seen in the 10% and 20% pre-strained tubes. Macroscopic residual stresses were measured to be near zero at distances greater than 25 mm from the weld centre-line, but measurements in the 20% pre-strained tube revealed the presence of micro residual stresses having a magnitude of up to 50 MPa

Injury in Ireland

Injury mortality is the fourth commonest cause of death in Ireland. The treatment of injuries has a major impact on our hospitals and on our budget for health. Long term disability following accidents is a serious problem. The aim of this report is to examine the impact of accidents and injuries on the Irish population by analysing routine mortality and morbidity data, and to identify in turn those areas where preventive measures could have an impact. In Section One the literature review details the advantages and disadvantages of each type of routine data source used in this report. The interpretation of data should take account of the constraints of the available data collected. The usefulness of routine data collection is highlighted, while identifying areas for improvement. In Section Two the methodology employed in the study is detailed. In Section Three data on hospital admissions over a five-year period 1993-1997 are presented. An overview of injury admissions is presented, followed by further analysis of injury data by both cause and by age group. In Section Four data on all accident-related deaths over a 17-year period, 1980-1996, are presented, with overall mortality data and mortality data by age group and by major causes of injury death detailed. In Section Five comparisons are made between the eight health board regions for rates of admissions and deaths due to injury. In presenting the data we use a matrix format devised and recommended by the International Collaborative Effort on Injury Statistics to display injury simultaneously by cause and intent. The use of a common format will also facilitate regional and international comparisons. In Section Six the priority recommendations for injury prevention are outlined. The key findings are then discussed and further recommendations are presented with the aim of injury prevention, reduction of disability and improvement in injury surveillance

A note on bounds for the cop number using tree decompositions

In this short note, we supply a new upper bound on the cop number in terms of tree decompositions. Our results in some cases extend a previously derived bound on the cop number using treewidth

Field localization on a brane intersection in anti-de Sitter spacetime

We discuss the localization of scalar, fermion, and gauge field zero modes on a $3-$brane that resides at the intersection of two $4-$branes in six-dimensional anti-de Sitter space. This set-up has been introduced in the context of brane world models and, higher-dimensional versions of it, in string theory. In both six- and ten-dimensional cases, it has been shown that four-dimensional gravity can be reproduced at the intersection, due to the existence of a massless, localized graviton zero-mode. However, realistic scenarios require also the Standard Model to be localized on the $3-$brane. In this paper, we discuss under which conditions a higher-dimensional field theory, propagating on the above geometry, can have a zero-mode sector localized at the intersection and find that zero modes can be localized only if masses and couplings to the background curvature satisfy certain relations. We also consider the case when other 4-branes cut the bulk at some distance from the intersection and argue that, in the probe brane approximation, there is no significant effect on the localization properties at the $3-$brane. The case of bulk fermions is particularly interesting, since the properties of the geometry allow localization of chiral modes independently.Comment: 13 pages, 3 figures, the version to be published in PR