Electrode and interconnect for miniature fuel cells using direct methanol feed

An improved system for interconnects in a fuel cell. In one embodiment, the membranes are located in parallel with one another, and current flow between them is facilitated by interconnects. In another embodiment, all of the current flow is through the interconnects which are located on the membranes. The interconnects are located between two electrodes

TWINLATIN: Twinning European and Latin-American river basins for research enabling sustainable water resources management. Combined Report D3.1 Hydrological modelling report and D3.2 Evaluation report

Water use has almost tripled over the past 50 years and in some regions the water demand already exceeds supply (Vorosmarty et al., 2000). The world is facing a “global water crisis”; in many countries, current levels of water use are unsustainable, with systems vulnerable to collapse from even small changes in water availability. The need for a scientifically-based assessment of the potential impacts on water resources of future changes, as a basis for society to adapt to such changes, is strong for most parts of the world. Although the focus of such assessments has tended to be climate change, socio-economic changes can have as significant an impact on water availability across the four main use sectors i.e. domestic, agricultural, industrial (including energy) and environmental. Withdrawal and consumption of water is expected to continue to grow substantially over the next 20-50 years (Cosgrove & Rijsberman, 2002), and consequent changes in availability may drastically affect society and economies. One of the most needed improvements in Latin American river basin management is a higher level of detail in hydrological modelling and erosion risk assessment, as a basis for identification and analysis of mitigation actions, as well as for analysis of global change scenarios. Flow measurements are too costly to be realised at more than a few locations, which means that modelled data are required for the rest of the basin. Hence, TWINLATIN Work Package 3 “Hydrological modelling and extremes” was formulated to provide methods and tools to be used by other WPs, in particular WP6 on “Pollution pressure and impact analysis” and WP8 on “Change effects and vulnerability assessment”. With an emphasis on high and low flows and their impacts, WP3 was originally called “Hydrological modelling, flooding, erosion, water scarcity and water abstraction”. However, at the TWINLATIN kick-off meeting it was agreed that some of these issues resided more appropriately in WP6 and WP8, and so WP3 was renamed to focus on hydrological modelling and hydrological extremes. The specific objectives of WP3 as set out in the Description of Work are

Reduced size fuel cell for portable applications

A flat pack type fuel cell includes a plurality of membrane electrode assemblies. Each membrane electrode assembly is formed of an anode, an electrolyte, and an cathode with appropriate catalysts thereon. The anode is directly into contact with fuel via a wicking element. The fuel reservoir may extend along the same axis as the membrane electrode assemblies, so that fuel can be applied to each of the anodes. Each of the fuel cell elements is interconnected together to provide the voltage outputs in series

Dental implants with locking taper connection versus screwed connection: microbiologic and scanning electron microscope study.

The aim of this study is to carry out an analysis of the Fixture-Abutment Interfaces (FAI), comparing different connection systems, to evaluate the role of geometric discrepancy, which is present between the abutment and the fixture, in favoring the permeability to bacterial colonization. Two types of commercially available FAI were studied, 16 screwed FAI (Sweden-Martina Italia) (4 of Ø 3.8 mm, 4 of Ø 4.7 mm, 4 of Ø 5.7 mm and 4 of Ø 6.7 mm) and 4 FAI (Bicon) (Ø 3.5mm). The assays were carried out in vitro, placing the different dental implants in contact with broth culture of Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa and Streptococcus pyogenes to test the infiltration inside the FAI. Furthermore, scanning electron microscope (SEM) analysis was carried out to evaluate the gap at the fixture-abutment interface. In all the locking taper FAI and in the screwed FAI with a diameter of 3.8 mm there was no trace of bacterial infiltration of the species examined. In the screwed FAI with a diameter of 4.7 mm, 5.7 mm and 6.7 mm there was an increasing level of bacterial infiltration in relationship to the diameter. Therefore, this paper shows that there exists an important correlation between the diameter of the screwed implant and the permeability to microbic infiltration that is directly proportional to the diameter of the implant

Análisis modal comparado entre modelos virtuales 2d y 3d aplicado a un Cube Sat

El siguiente trabajo presenta un análisis modal comparado entre modelos virtuales 2D y 3D, para validar la sistematización de una metodología de análisis completo de Ingeniería Asistida por Computadora, ejemplificada en la aplicación a un modelo de nano satélite tipo Cube Sat. Se detallan los requerimientos de las especificaciones técnicas, condiciones estructurales, cargas, restricciones y frecuencias de vibración, que sufre este satélite al momento de su despegue y durante su órbita. Posteriormente se aplica al Diseño Asistido por Computadora la solicitud del análisis de respuesta dinámica al modelo de su estructura principal simplificada, utilizando el Método de los Elementos Finitos. Las simulaciones incluyen el análisis dinámico de frecuencias naturales y modos de vibración libre. La comparación se lleva a cabo con las herramientas de un Sistema de Ingeniería Basada en el Conocimiento que permiten optimizar la elaboración de diseños mecánicos y reducir tiempos de solución ante nuevos retos de simulación

A Unique Amphibole- and Magnetite-Rich Carbonaceous Chondrite from Almahata Sitta

Almahata Sitta (AhS) 202 from the UoK collection represents a clast from the polymict breccia asteroid 2008 TC3. AhS 202 was recognized as a unique carbonaceous chondrite (CC) with a high magnetite content. Here we report that it also contains a significant amount of amphibole, a mineral that is very rare in chondrites and has not previously been reported in significant abundance in a CC. We present new petrographic, oxygen isotope, and micro-FTIR data. We discuss petrogenesis and possible relationships to known CC

Geologically recent areas as one key target for identifying active volcanism on Venus

The recently selected NASA VERITAS and DAVINCI missions, the ESA EnVision, the Roscosmos Venera-D will open a new era in the exploration of Venus. One of the key targets of the future orbiting and in situ investigations of Venus is the identification of volcanically active areas on the planet. The study of the areas characterized by recent or ongoing volcano-tectonic activity can inform us on how volcanism and tectonism are currently evolving on Venus. Following this key target, Brossier et al. (2022, https://doi.org/10.1029/2022GL099765) extend the successful approach and methodology used by previous works to Ganis Chasma in Atla Regio. Here we comment on the main results published in Brossier et al. (2022, https://doi.org/10.1029/2022GL099765) and discuss the important implications of their work for the future orbiting and in situ investigation of Venus. Their results add further lines of evidence indicating possibly recent volcanism on Venus

Mount Etna as a terrestrial laboratory to investigate recent volcanic activity on Venus by future missions:A comparison with Idunn Mons, Venus

The recently selected missions to Venus have opened a new era for the exploration of this planet. These missions will provide information about the chemistry of the atmosphere, the geomorphology, local-to-regional surface composition, and the rheology of the interior. One key scientific question to be addressed by these future missions is whether Venus remains volcanically active, and if so, how its volcanism is currently evolving. Hence, it is fundamental to analyze appropriate terrestrial analog sites for the study of possibly active volcanism on Venus. To this regard, we propose Mount Etna - one of the most active and monitored volcanoes on Earth - as a suitable terrestrial laboratory for remote and in-situ investigations to be performed by future missions to Venus. Being characterized by both effusive and explosive volcanic products, Mount Etna offers the opportunity to analyze multiple eruptive styles, both monitoring active volcanism and identifying the possible occurrence of pyroclastic activity on Venus. We directly compare Mount Etna with Idunn Mons, one of the most promising potentially active volcanoes of Venus. Despite the two structures show a different topography, they also show some interesting points of comparison, and in particular: a) comparable morpho-structural setting, since both volcanoes interact with a rift zone, and b) morphologically similar volcanic fields around both Mount Etna and Idunn Mons. Given its ease of access, we also propose Mount Etna as an analog site for laboratory spectroscopic studies to identify the signatures of unaltered volcanic deposits on Venus

Aedes albopictus in northeast Mexico: An update on adult distribution and first report of parasitism by Ascogregarina taiwanensis

ABSTRACT Background & objectives: Aedes albopictus has been known as efficient vector of dengue in Asian countries and its wide displacement of Ae. aegypti has been documented in many parts of the world. The present survey was carried out to update the distribution of Ae. albopictus in northeast Mexico and to report the first record of parasitism of mosquitoes by Ascogregarina taiwanensis in Mexico