Rationally designed anionic diblock copolymer worm gels are useful model systems for calcite occlusion studies

Binary mixtures of anionic and non-ionic macromolecular chain transfer agents (macro-CTAs) are utilized in order to rationally design diblock copolymer nanoparticles with tunable morphologies and anionic character via pseudo-living radical polymerization. More specifically, poly(methacrylic acid) (PMAA) and poly(glycerol monomethacrylate) (PGMA) macro-CTAs are pre-mixed prior to reversible addition–fragmentation chain transfer (RAFT) aqueous dispersion polymerization of 2-hydroxypropyl methacrylate (HPMA). This strategy facilitates the formation of PHPMA-based diblock copolymer spheres, worm-like micelles and vesicles via polymerization-induced self-assembly (PISA). The presence of the anionic PMAA stabilizer block has a dramatic impact on the resulting copolymer morphology, particularly if the degree of polymerization (DP) of the PMAA stabilizer chains is longer than that of the PGMA. Two phase diagrams have been constructed to investigate the effect of the relative proportion and molar mass of the two macro-CTAs. Such a systematic approach is essential for the reproducible synthesis of pure worm-like micelles, which occupy relatively narrow phase space. The rheological behavior of a series of soft, free-standing worm gels is investigated. Finally, such gels are examined as model matrices for the growth of biomimetic calcite crystals and the role of the anionic PMAA stabilizer chains in directing crystal growth is evaluated

Spatially controlled occlusion of polymer-stabilized gold nanoparticles within ZnO

In principle, incorporating nanoparticles into growing crystals offers an attractive and highly convenient route for the production of a wide range of novel nanocomposites. Herein we describe an efficient aqueous route that enables the spatially controlled occlusion of gold nanoparticles (AuNPs) within ZnO crystals at up to 20 % by mass. Depending on the precise synthesis protocol, these AuNPs can be (i) solely located within a central region, (ii) uniformly distributed throughout the ZnO host crystal or (iii) confined to a surface layer. Remarkably, such efficient occlusion is mediated by a non-ionic water-soluble polymer, poly(glycerol monomethacrylate)70 (G70 ), which is chemically grafted to the AuNPs; pendent cis-diol side groups on this steric stabilizer bind Zn2+ cations, which promotes nanoparticle interaction with the growing ZnO crystals. Finally, uniform occlusion of G70 -AuNPs within this inorganic host leads to faster UV-induced photodegradation of a model dye

Occlusion of Sulfate-based Diblock Copolymer Nanoparticles within Calcite: Effect of Varying the Surface Density of Anionic Stabilizer Chains

Polymerization-induced self-assembly (PISA) offers a highly versatile and efficient route to a wide range of organic nanoparticles. In this article, we demonstrate for the first time that poly(ammonium 2-sulfatoethyl methacrylate)-poly(benzyl methacrylate) [PSEM–PBzMA] diblock copolymer nanoparticles can be prepared with either a high or low PSEM stabilizer surface density using either RAFT dispersion polymerization in a 2:1 v/v ethanol/water mixture or RAFT aqueous emulsion polymerization, respectively. We then use these model nanoparticles to gain new insight into a key topic in materials chemistry: the occlusion of organic additives into inorganic crystals. Substantial differences are observed for the extent of occlusion of these two types of anionic nanoparticles into calcite (CaCO3), which serves as a suitable model host crystal. A low PSEM stabilizer surface density leads to uniform nanoparticle occlusion within calcite at up to 7.5% w/w (16% v/v), while minimal occlusion occurs when using nanoparticles with a high PSEM stabilizer surface density. This counter-intuitive observation suggests that an optimum anionic surface density is required for efficient occlusion, which provides a hitherto unexpected design rule for the incorporation of nanoparticles within crystals

Incorporating Diblock Copolymer Nanoparticles into Calcite Crystals: Do Anionic Carboxylate Groups Alone Ensure Efficient Occlusion?

New spherical diblock copolymer nanoparticles were synthesized via RAFT aqueous dispersion polymerization of 2- hydroxypropyl methacrylate (HPMA) at 70 °C and 20% w/w solids using either poly(carboxybetaine methacrylate) or poly(proline methacrylate) as the steric stabilizer block. Both of these stabilizers contain carboxylic acid groups, but poly(proline methacrylate) is anionic above pH 9.2, whereas poly(carboxybetaine methacrylate) has zwitterionic character at this pH. When calcite crystals are grown at an initial pH of 9.5 in the presence of these two types of nanoparticles, it is found that the anionic poly(proline methacrylate)-stabilized particles are occluded uniformly throughout the crystals (up to 6.8% by mass, 14.0% by volume). In contrast, the zwitterionic poly(carboxybetaine methacrylate)- stabilized particles show no signs of occlusion into calcite crystals grown under identical conditions. The presence of carboxylic acid groups alone therefore does not guarantee efficient occlusion: overall anionic character is an additional prerequisite

Sulfate-based anionic diblock copolymer nanoparticles for efficient occlusion within zinc oxide

Occlusion of copolymer particles within inorganic crystalline hosts not only provides a model for understanding the crystallisation process, but also may offer a direct route for the preparation of novel nanocomposite materials with emergent properties. In the present paper, a series of new well-defined anionic diblock copolymer nanoparticles are synthesised by polymerisation-induced self-assembly (PISA) via reversible addition-fragmentation chain transfer (RAFT) aqueous emulsion polymerisation and then evaluated as crystal habit modifiers for the in situ formation of ZnO in aqueous solution. Systematic studies indicate that both the chemical nature (i.e. whether sulfate-based or carboxylate-based) and the mean degree of polymerisation (DP) of the anionic stabiliser block play vital roles in determining the crystal morphology. In particular, sulfate-functionalised nanoparticles are efficiently incorporated within the ZnO crystals whereas carboxylate-functionalised nanoparticles are excluded, thus anionic character is a necessary but not sufficient condition for successful occlusion. Moreover, the extent of nanoparticle occlusion within the ZnO phase can be as high as 23% by mass depending on the sulfate-based nanoparticle concentration. The optical properties, chemical composition and crystal structure of the resulting nanocomposite crystals are evaluated and an occlusion mechanism is proposed based on the observed evolution of the ZnO morphology in the presence of sulfate-based anionic nanoparticles. Finally, controlled deposition of a 5 nm gold sol onto porous ZnO particles (produced after calcination of the organic nanoparticles) significantly enhances the rate of photocatalytic decomposition of a model rhodamine B dye on exposure to a relatively weak UV source

a sedimentological record of early miocene ice advance and retreat and 2a drill hole mcmurdo sound antarctica

n/

Star Diblock Copolymer Concentration Dictates the Degree of Dispersion of Carbon Black Particles in Nonpolar Media: Bridging Flocculation versus Steric Stabilization

The solution behavior of a polystyrene–hydrogenated polyisoprene star diblock copolymer (Mn ∼ 384 K; 6 mol % polystyrene) is examined in nonpolar media. Variable temperature 1H NMR studies using deuterated n-dodecane confirm that the outer polystyrene blocks are only partially solvated in n-dodecane at 25 °C: the apparent polystyrene content of 3.2 ± 0.2 mol % remains essentially constant on heating up to 100 °C. Physical adsorption of this star diblock copolymer onto carbon black particles is examined, with particular attention being paid to the effect of copolymer concentration on colloidal stability. An isotherm is constructed for copolymer adsorption onto carbon black from n-dodecane at 20 °C using a supernatant depletion assay based on UV spectroscopy analysis of the aromatic chromophore in the polystyrene block. Langmuir-type adsorption is observed with a maximum adsorbed amount, Γ, of ∼2.2 ± 0.1 mg m–2. In addition, thermogravimetric analysis is used to directly determine the amount of adsorbed copolymer on the carbon black particles, which are essentially incombustible under an inert atmosphere. Analytical centrifugation, optical microscopy, and transmission electron microscopy studies indicate that the star diblock copolymer acts as an effective flocculant at low concentration, with steric stabilization only being observed above a certain critical copolymer concentration (∼5.5% w/w based on carbon black). This is attributed to the spatial location of the polystyrene block and the star copolymer architecture, which enables copolymer adsorption onto multiple carbon black particles at low coverage, leading to bridging flocculation. Above 5.5% w/w copolymer, the surface coverage is sufficiently high that all of the polystyrene “stickers” adsorb onto single carbon black particles, resulting in colloidally stable, sterically stabilized carbon black dispersions. Small-angle X-ray scattering (SAXS) is also used to characterize the copolymer-coated carbon black particles: this technique provides useful complementary insights regarding the rather subtle changes in the fractal morphology that occur with increasing copolymer concentration. Moreover, SAXS also provides direct evidence for the presence of the copolymer chains at the particle surface

Differential ablation of organic coatings from micrometeoroids simulated in the laboratory

Micrometeoroids contain organic material that may undergo differential ablation during atmospheric entry, potentially depositing organic material into Earth's atmosphere and affecting the radar detectability of meteors. To investigate the differential ablation of organics, we used a dust accelerator to shoot submicron polypyrrole-coated olivine particles at speeds of 10–20 km/s into a gas target containing air. A set of biased electrodes placed along the path of the particles measured the charges generated when the particles ablated and the ablated molecules collided with gas molecules. We observed that the particles differentially ablate their organic polypyrrole coatings prior to their inorganic olivine cores, producing spikes in charge production, with charge yields of 104–105 C/kg even at relatively low speeds. These measurements suggest that large organic molecules survived ablation and are responsible for the observed charge production since small molecules either do not produce ions at those speeds or produce them in much lower quantities than observed. We modeled the ablation using basic meteor physics by assuming that the polypyrrole coating decomposes into pyrrole monomer. Extending these results to the ablation of micrometeoroids in the atmosphere indicates that organic coatings should ablate at high altitudes within relatively narrow altitude ranges, which has consequences for the detectability of meteors by radar. Since the ablated coatings generate relatively large molecules, the results also suggest that micrometeoroids can deliver complex organic material into planetary atmospheres by ablating them during entry, potentially serving as a source of prebiotic organics

Track D Social Science, Human Rights and Political Science

Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/138414/1/jia218442.pd