2,363 research outputs found
Wrong sign and symmetric limits and non-decoupling in 2HDMs
We analyse the possibility that, in two Higgs doublet models, one or more of
the Higgs couplings to fermions or to gauge bosons change sign, relative to the
respective Higgs Standard Model couplings. Possible sign changes in the
coupling of a neutral scalar to charged ones are also discussed. These
\textit{wrong signs} can have important physical consequences, manifesting
themselves in Higgs production via gluon fusion or Higgs decay into two gluons
or into two photons. We consider all possible wrong sign scenarios, and also
the \textit{symmetric limit}, in all possible Yukawa implementations of the two
Higgs doublet model, in two different possibilities: the observed Higgs boson
is the lightest CP-even scalar, or the heaviest one. We also analyse thoroughly
the impact of the currently available LHC data on such scenarios. With all 8
TeV data analysed, all wrong sign scenarios are allowed in all Yukawa types,
even at the 1 level. However, we will show that B-physics constraints
are crucial in excluding the possibility of wrong sign scenarios in the case
where is below 1. We will also discuss the future prospects for
probing the wrong sign scenarios at the next LHC run. Finally we will present a
scenario where the alignment limit could be excluded due to non-decoupling in
the case where the heavy CP-even Higgs is the one discovered at the LHC.Comment: 20 pages, 15 figure
The CP-conserving 2HDM after the 8 TeV run
We confront the most common CP-conserving 2HDM with the LHC data analysed so
far while taking into account all previously available experimental data. A
special allowed corner of the parameter space is analysed - the so-called
wrong-sign scenario where the Higgs coupling to down-type quarks changes sign
relative to the Standard Model while the coupling to the massive vector bosons
does not.Comment: 6 pages, 2 figures, to appear in the proceedings of the 22nd
International Workshop on Deep-Inelastic Scattering and Related Subjects (DIS
2014), 28 April - 2 May 2014 Warsaw (Poland
The Wrong Sign limit in the 2HDM
A sign change in the Higgs couplings to fermions and massive gauge bosons is
still allowed in the framework of two-Higgs doublet models (2HDM). In this work
we discuss the possible sign changes in the Higgs couplings to fermions and
gauge bosons, while reviewing the status of the 8-parameter CP-conserving 2HDM
after the Large Hadron Collider 8 TeV run.Comment: 6 pages, 3 figures. Proceedings of the Second Annual Conference on
Large Hadron Collider Physics, Columbia University, New York, U.S.A, June
2-7, 2014. arXiv admin note: text overlap with arXiv:1407.439
Collaborative methodologies in island fishing communities of cape verde
Publisher Copyright:
© 2021 by the authors. Licensee MDPI, Basel, Switzerland.Marine litter has been considered one of the most serious global challenges, requiring urgent action by governmental bodies, especially in African Small Island Developing States (SIDS), where resources and research are limited. In addition to this, waste management and environmental education and ocean literacy programs in schools are scarce, with islands suffering more seriously from these problems. Despite the amount of literature regarding causes and impacts of marine litter, there is still not enough research conducted concerning the public perceptions on both the problem and the potential solutions. This is even more noticeable in African developing countries, where resources and research are scarce. Perception plays a key role for ecosystem management and conservation policies. This study intends to explore the perceptions of local island fishing communities in Cape Verde regarding marine litter, in order to contribute for an improvement of marine ecosystem management and development of conservation policies. To achieve that, two participatory sessions were conducted in two communities in the island of Santiago—Porto Mosquito and Porto Gouveia—where brainstorming and active listening were used to create shared and authentic spaces for dialogue between the members of the community. Results show that the population of both communities were very aware of the marine litter problem. They were able to identify the lack of a proper waste management system in the island and the inappropriate behaviours of the population as the main causes of this problem. Equipment damages and the presence of plastic inside the fish were the most relevant impacts identified by the participants. These findings reinforce previous research on the importance of public engagement and environmental education to contribute to the conservation of marine ecosystems and to build a strong collaborative ocean governance.publishersversionpublishe
Study of the effect of friction between the ossicles of the middle ear
The human ear is a complex biomechanical system and is divided by three parts: outer, middle and inner ear. The middle ear is formed by three ossicles (malleus, incus and stapes), ligaments, muscles and tendons,
that amplify the sound, sending the sound waves to the inner ear.
In this work, a finite element modelling of the middle ear and ligaments was made. The connection between ossicles was achieved using contact formulation. The modelling of ligaments was based in a hyperelastic
model. Studies based in the displacement field of the eardrum and footplate were made, as well as the rotation of the footplate. The stress field in the ligaments to the exterior of the ossicular chain was still analyzed. These studies were done for different friction rates, between the ossicles, and for different acoustic
pressure values applied in the eardrum. We can conclude that the connection between the ossicles may be assigned by contact formulation including friction. For simulation proposes, we can assume a quasi-rigid connection between ossicles.Peer Reviewe
Production of polymer filament-shaped piezoelectric sensors for e-textiles applications
This work aims at the development of piezoelectric materials for flexible sensors produced with various geometries, at low cost and high production rates, adequate for the industrial scale. In particular the filament form, appropriate for integration into textiles, is described, but other geometries, such as tape, are also being studied. The filaments are produced by co-extrusion of multiple layers with piezoelectric and electrically conductive polymer composites.Fundação para a Ciência e a Tecnologia (FCT) - PTDC/CTM/108801/200
Piezoelectric filaments produced by coextrusion
Considering the significant interest of both the academic and industrial communities in the fields of i/e-textiles (interactive/electronic textiles), the number of developed applications is far below the expected. This fact is mainly related to the difficulties on the development of production methodologies adequate to industrial scale processes. In this areas the integration of piezoelectric materials, that possess sensing/actuating capabilities, such as poly(vinylidene fluoride), PVDF, and can be processed using conventional processing techniques, is very promising and has encouraged a large number of research works. However, until now, most of the developed production methodologies are difficult to adapt to the industrial scale. This work reports recent developments achieved, in the framework of a research project, on the production of piezoelectric filament by coextrusion of PVDF and electrical conductive layers. The developed production methodology involves a conventional coextrusion line, for which a coextrusion die was designed to produce a multilayer filament. This filament comprises an inner layer of an electrically conductive Polypropylene grade and a middle layer of PVDF and is coated with an electrical conductive ink. The piezoelectric response of the produced filaments will be also presentedFundação para a Ciência e a Tecnologia (FCT)- FCT PTDC/CTM/108801/200
Evaluation of a model photo-caged dehydropeptide as a stimuli-responsive supramolecular hydrogel
Short peptides capped on the N-terminus with aromatic groups are often able to form supramolecular hydrogels, via self-assembly, in aqueous media. The rheological properties of these readily tunable hydrogels resemble those of the extracellular matrix (ECM) and therefore have potential for various biological applications, such as tissue engineering, biosensors, 3D bioprinting, drug delivery systems and wound dressings. We herein report a new photo-responsive supramolecular hydrogel based on a “caged” dehydropeptide (CNB-Phe-ΔPhe-OH 2), containing a photo-cleavable carboxy-2-nitrobenzyl (CNB) group. We have characterized this hydrogel using a range of techniques. Irradiation with UV light cleaves the pendant aromatic capping group, to liberate the corresponding uncaged model dehydropeptide (H-Phe-ΔPhe-OH 3), a process which was investigated by 1H NMR and HPLC studies. Crucially, this cleavage of the capping group is accompanied by dissolution of the hydrogel (studied visually and by fluorescence spectroscopy), as the delicate balance of intramolecular interactions within the hydrogel structure is disrupted. Hydrogels which can be disassembled non-invasively with temporal and spatial control have great potential for specialized on-demand drug release systems, wound dressing materials and various topical treatments. Both 2 and 3 were found to be non-cytotoxic to the human keratinocyte cell line, HaCaT. The UV-responsive hydrogel system reported here is complementary to previously reported related UV-responsive systems, which are generally composed of peptides formed from canonical amino acids, which are susceptible to enzymatic proteolysis in vivo. This system is based on a dehydrodipeptide structure which is known to confer proteolytic resistance. We have investigated the ability of the photo-activated system to accelerate the release of the antibiotic, ciprofloxacin, as well as some other small model drug compounds. We have also conducted some initial studies towards skin-related applications. Moreover, this model system could potentially be adapted for on-demand “self-delivery”, through the uncaging of known biologically active dehydrodipeptides.This work was supported by the Portuguese Foundation for Science and Technology
(FCT) in the framework of the Strategic Funding of CQUM (UID/QUI/00686/2019) and of IPC
(UID/CTM/50025/2019). L.H. acknowledges funding from the FCT Investigator Programme through
grant IF/00606/2014. FCT, FEDER, PORTUGAL2020 and COMPETE2020 are also acknowledged for
funding under research project PTDC/QUI-QOR/29015/2017 (POCI-01-0145-FEDER-029015)
Theoretical simulation of different 3D separator geometries for lithium-ion batteries
The battery separator is an essential component of batteries and affects their cycling performance.
In this work, the effect of different 3D geometries of the battery separator on battery performance was
studied keeping the same volume. It was observed that the different geometries affect the cycling
performance, the best geometry being the perforated one that cycled up to 90 C. The cycling performance is
affected by parameters such as the separator thickness and the electrolyte volume. Through the control of the
battery separator geometry it is possible to obtain high performance lithium-ion batteries.Portuguese Foundation for Science and Technology (FCT): UID/FIS/04650/2019, PTDC/CTMENE/5387/2014, UID/CTM/50025/2013, PTDC/FIS-MAC/28157/2017, grant SFRH/BPD/112547/2015
(C.M.C.) and contract CEECIND/00833/2017 (R.G.), including FEDER funds through the COMPETE
2020 Programme and National Funds through FCT. Financial support from the Basque Government
Industry Department under the ELKARTEK and HAZITEK programs is also acknowledged. F. Miranda
was also supported by Portuguese funds through the CIDMA - Center for Research and Development in Mathematics and Applications, and the Portuguese Foundation for Science and Technology (“FCT -
Fundação para a Ciência e a Tecnologia”), within project UID/MAT/04106/2013
- …