Factors affecting the production of Trichoderma harzianum secondary metabolites during the interaction with different plant pathogens

Strains of Trichoderma spp. produce numerous bioactive secondary metabolites. The in vitro production and antibiotic activities of the major compounds synthesized by Trichoderma harzianum strains T22 and T39 against Leptosphaeria maculans, Phytophthora cinnamomi and Botrytis cinerea were evaluated. Moreover, the eliciting effect of viable or nonviable biomasses of Rhizoctonia solani, Pythium ultimum or B. cinerea on the in vitro production of these metabolites was also investigated. T22azaphilone, 1-hydroxy-3-methyl-anthraquinone, 1,8-dihydroxy-3-methyl-anthraquinone, T39butenolide, harzianolide, harzianopyridone were purified, characterized and used as standards. In antifungal assays, T22azaphilone and harzianopyridone inhibited the growth of the pathogens tested even at low doses (1-10 mu g per plug), while high concentrations of T39butenolide and harzianolide were needed (> 100 mu g per plug) for inhibition. The in vitro accumulation of these metabolites was quantified by LC/MS. T22azaphilone production was not enhanced by the presence of the tested pathogens, despite its antibiotic activity. On the other hand, the anthraquinones, which showed no pathogen inhibition, were stimulated by the presence of P. ultimum. The production of T39butenolide was significantly enhanced by co-cultivation with R. solani or B. cinerea. Similarly, viable and nonviable biomasses of R. solani or B. cinerea increased the accumulation of harzianopyridone. Finally, harzianolide was not detected in any of the interactions examined. The secondary metabolites analysed in this study showed different levels of antibiotic activity. Their production in vitro varied in relation to: (i) the specific compound; (ii) the phytopathogen used for the elicitation; (iii) the viability of the elicitor; and (iv) the balance between elicited biosynthesis and biotransformation rates. The use of cultures of phytopathogens to enhance yields of Trichoderma metabolites could improve the production and application of novel biopesticides and biofertilizers based on the active compounds instead of the living microbe. This could have a significant beneficial impact on the management of diseases in crop plants

Correlation of Parameters used to Estimate Monomer Conversion in a Light-cured Composite

The sensitivities of Fourier transform infrared spectroscopy, Knoop hardness, water sorption, and resin leaching were compared for their ability to distinguish differences between composite samples cured through different thicknesses of overlying resin. The method developed allowed samples of light-cured composite to be made with controlled conversion for parameter testing, and eliminated effects of resin lost to slurry during polishing or an increase in conversion as a result of heat generated during grinding. Sensitivity to differences was greatest and equal for FTIR spectroscopy and Knoop hardness, while resin leaching proved to have moderate sensitivity, and water sorption none. The ability of these parameters to predict monomer conversion as measured by FTIR spectroscopy was also determined. Knoop hardness proved the best conversion predictor, resin leaching the next best, and water sorption the worst. Water sorption values did not vary with changes in specimen conversion.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/67029/2/10.1177_00220345880670060801.pd

The intervention of the emergency psychologist: The sipem sos emilia romagna during the first lockdown from covid-19. A retrospective study

Background and purpose of this work: WHO 11 March 2020 declares that Sars-Cov-2 infection is not only a health emergency but must be considered a pandemic. Covid-19 required the urgency of a new psychological intervention model to better address the crisis and ensure a direct support response to the people involved in the pandemic. The present study aimed to detect the symptoms and reactions of the population with respect to the event. The survey was carried out by describing the clinical symptoms that emerged from the triage card used by SIPEM SoS Emilia Romagna (Italy), connoting the criteria of emergency psychology. Methods: A retrospective quantitative study was conducted on 288 psychological triage cards. Results: only 11% of users who ask for support say they are positive while 85% report not having contracted the virus. Of the total, 40.9% call for psychological support in the management of anxiety symptoms, a need also reported by 55% of the subsample who declared previous psychological problems. In reaction to the pandemic event, 51.1% of the total refers to coping resources and availability for help. Discussions: the need for support of the population to manage symptoms highlights the need for early interventions, also to facilitate that slice of the population that does not have effective individual coping strategies and resources available to help. Conclusions: it can be deduced that interventions during these types of emergencies must be timely and aimed not only at those affected but also at the general population. (www.actabiomedica.it)

Conversion of the Mycotoxin Patulin to the Less Toxic Desoxypatulinic Acid by the Biocontrol Yeast Rhodosporidium kratochvilovae Strain LS11

Se describe en este artículo el descubrimiento de la degradación de la micotoxina patulina por una levaduraThe infection of stored apples by the fungus Penicillium expansum causes the contamination of fruits and fruit-derived products with the mycotoxin patulin, which is a major issue in food safety. Fungal attack can be prevented by beneficial microorganisms, so-called biocontrol agents. Previous time-course thin layer chromatography analyses showed that the aerobic incubation of patulin with the biocontrol yeast Rhodosporidium kratochvilovae strain LS11 leads to the disappearance of the mycotoxin spot and the parallel emergence of two new spots, one of which disappears over time. In this work, we analyzed the biodegradation of patulin effected by LS11 through HPLC. The more stable of the two compounds was purified and characterized by nuclear magnetic resonance as desoxypatulinic acid, whose formation was also quantitated in patulin degradation experiments. After R. kratochvilovae LS11 had been incubated in the presence of 13C-labeled patulin, label was traced to desoxypatulinic acid, thus proving that this compound derives from the metabolization of patulin by the yeast. Desoxypatulinic acid was much less toxic than patulin to human lymphocytes and, in contrast to patulin, did not react in vitro with the thiol-bearing tripeptide glutathione. The lower toxicity of desoxypatulinic acid is proposed to be a consequence of the hydrolysis of the lactone ring and the loss of functional groups that react with thiol groups. The formation of desoxypatulinic acid from patulin represents a novel biodegradation pathway that is also a detoxification process

Reduced habit-driven errors in Parkinson’s Disease

Parkinson’s Disease can be understood as a disorder of motor habits. A prediction of this theory is that early stage Parkinson’s patients will display fewer errors caused by interference from previously over-learned behaviours. We test this prediction in the domain of skilled typing, where actions are easy to record and errors easy to identify. We describe a method for categorizing errors as simple motor errors or habit-driven errors. We test Spanish and English participants with and without Parkinson’s, and show that indeed patients make fewer habit errors than healthy controls, and, further, that classification of error type increases the accuracy of discriminating between patients and healthy controls. As well as being a validation of a theory-led prediction, these results offer promise for automated, enhanced and early diagnosis of Parkinson’s Disease

Cyclic mechanical loading promotes bacterial penetration along composite restoration marginal gaps

OBJECTIVES: Secondary caries is the most common reason for composite restoration replacement and usually forms between dentin and the filling. The objective of this study was to investigate the combined effect of cyclic loading and bacterial exposure on bacterial penetration into gaps at the interface between dentin and resin composite restorative material using a novel bioreactor system and test specimen design. METHODS: Human molars were machined into 3 mm thick disks with 2 mm deep x 5 mm diameter cavity preparations into which composite restorations were placed. A ~15-30 micrometer (small) or ~300 micrometer wide (large) dentin-restoration gap was introduced along half of the interface between the dentin and restoration. Streptococcus mutans UA 159 biofilms were grown on each sample prior to testing in a bioreactor both with and without cyclic loading. Both groups of samples were tested for 2 weeks and post-test biofilm viability was confirmed with a live-dead assay. Samples were fixed, mounted and cross-sectioned to reveal the gaps and observe the depth of bacterial penetration. RESULTS: It was shown that for large gap samples the bacteria easily penetrated to the full depth of the gap independent of loading or non-loading conditions. The results for all cyclically loaded small gap samples show a consistently deep bacterial penetration down 100% of the gap while the average penetration depth was only 67% for the non-loaded samples with only two of six samples reaching 100%. SIGNIFICANCE: A new bioreactor was developed that allows combining cyclic mechanical loading and bacterial exposure of restored teeth for bacterial biofilm and demineralization studies. Cyclic loading was shown to aid bacterial penetration into narrow marginal gaps, which could ultimately promote secondary caries formation.Keywords: Secondary caries, Cyclic loading, Marginal gap, Streptococcus mutans, Biofilm, Resin composit

Investigation on synthesis and properties of isosorbide based bis-GMA analogue

The aim of this work was to synthesize and investigate properties of a novel dimethacrylic monomer based on bioderived alicyclic diol—isosorbide. Its potential as a possible substitute of 2,2-bis[4-(2-hydroxy-3-methacryloyloxypropoxy)phenyl]propane (BISGMA), widely used in dental restorative materials and suspected for toxicity was assessed. The novel monomer was obtained in a three-step synthesis. First, isosorbide was etherified by a Williamson nucleophilic substitution and subsequently oxidized to isosorbide diglycidyl ether (ISDGE). A triphenyl phosphine catalyzed addition of methacrylic acid to ISDGE resulted in 2,5-bis(2-hydroxy-3-methacryloyloxypropoxy)- 1,4:3,6-dianhydro-sorbitol (ISDGMA). The monomer obtained was photopolymerized using camphorquinone/2-(dimethylamino)ethyl methacrylate initiating system. Next, compositions with triethylene glycol dimethacrylate (TEGDMA) were prepared and polymerized. Double bond conversion, polymerization shrinkage and water sorption of resulting polymers were determined. Selected mechanical (flexular strength and modulus, Brinell hardness) and thermomechanical (DMA analysis) properties were also investigated. BISGMA based materials were prepared as reference for comparison of particular properties