609 research outputs found

    Evaluation of entropy and JM-distance criterions as features selection methods using spectral and spatial features derived from LANDSAT images

    Get PDF
    A study area near Ribeirao Preto in Sao Paulo state was selected, with predominance in sugar cane. Eight features were extracted from the 4 original bands of LANDSAT image, using low-pass and high-pass filtering to obtain spatial features. There were 5 training sites in order to acquire the necessary parameters. Two groups of four channels were selected from 12 channels using JM-distance and entropy criterions. The number of selected channels was defined by physical restrictions of the image analyzer and computacional costs. The evaluation was performed by extracting the confusion matrix for training and tests areas, with a maximum likelihood classifier, and by defining performance indexes based on those matrixes for each group of channels. Results show that in spatial features and supervised classification, the entropy criterion is better in the sense that allows a more accurate and generalized definition of class signature. On the other hand, JM-distance criterion strongly reduces the misclassification within training areas

    A new perspective in perinatal lamb mortality

    Get PDF
    Perinatal lamb mortality is one of the most important factors limiting the biological and economic efficiency of sheep production systems worldwide. The losses derive not only from the death of animals but also from the greater use of forage and less production of wool from the pregnant sheep, as well as from the lesser number of animals available for selection. In Uruguay, the average perinatal mortality figure is estimated at 20% of lambs born, with a variation from 14 to 32% depending on the years and the properties. Similar losses occur in Australia, New Zealand, South Africa and other countries with significant sheep production. It is significant that these levels of losses have not changed substantially in recent decades despite the efforts made by researchers, extensionists, and producers. Under extensive production conditions, mortality is difficult to decrease beyond 10%. For these reasons, many experts consider that perinatal mortality in sheep is a frustrating and unsolvable problem. The results suggest that to decrease perinatal mortality, greater emphasis should be placed on the ease of calving of the sheep and/or on the biotype of the lambs, either by selecting new biotypes or incorporating new genetic lines. In conclusion, the perinatal mortality of lambs is a still open problem that requires new lines of research

    Farinha de Schizochytrium sp. como fonte de DHA na suplementação dietética para tilápia-do-nilo: retenção perfil de ácidos graxos

    Get PDF
    Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro de Ciências Agrárias, Programa de Pós-Graduação em Aquicultura, Florianópolis, 2017.O objetivo deste estudo foi avaliar a farinha de Schizochytrium sp. (All-G-Rich®) como fonte de ácido docosaexaenoico (DHA) em dietas para juvenis de tilápia-do-nilo, quanto à retenção de ácidos graxos corporais e composição de ácidos graxos no músculo. A farinha de Schizochytrium sp. foi testada em quatro níveis (0,5; 1,0; 2,0 e 4,0% da dieta na matéria seca), além de uma dieta sem inclusão de farinha de Schizochytrium sp. (0% All-G-Rich®), em delineamento inteiramente ao acaso (DIC), com cinco tratamentos e cinco repetições. Ainda, a dieta com 1% de farinha de Schizochytrium sp. foi comparada com uma dieta controle, contendo quantidade equivalente de DHA, mas na forma de 1,7% de óleo de fígado de bacalhau, na matéria seca (OFB), em DIC, com dois tratamentos e cinco repetições. Os juvenis de tilápia (8,35 ± 0,80 g) foram alimentados duas vezes ao dia até saciedade aparente, em unidades experimentais de 100 L estocadas com 25 peixes cada, em sistema de recirculação e temperatura controlada da água (28°C), durante 57 dias. Ao final do experimento foi possível observar uma redução na retenção corporal dos ácidos graxos DHA e total PUFA n-3 e aumento na retenção corporal de a-LNA, LOA e total PUFA n-6 em juvenis de tilápia, devido ao aumento da inclusão da farinha de Schizochytrium sp. nas dietas. A composição de ácidos graxos no músculo da tilápia foi afetada pelas inclusões crescentes de farinha de Schizochytrium sp. na dieta, com aumento nas quantidades de DHA, a-LNA, PUFA n-3 e LC-PUFA n-3 e diminuição de MUFA, PUFA n-6 e LC-PUFA n-6. Ao comparar a retenção corporal dos ácidos graxos entre os peixes alimentados com fontes equivalentes em DHA na dieta, farinha de Schizochytrium sp. e OFB, observou-se maior retenção corporal para os ácidos graxos DHA, a-LNA, LOA, PUFA n-3 e PUFA n-6 nos peixes alimentados com a dieta contendo OFB. Igualmente, juvenis alimentados com a dieta OFB apresentaram maior conteúdo DHA, PUFA n-3 e LC-PUFA n-3 e menor conteúdo de SFA, PUFA n-6 e LC-PUFA n-6 na composição de ácidos graxos no músculo. Conclui-se que apesar da redução da taxa de retenção corporal de DHA em juvenis de tilápia-do-nilo com o aumento da farinha de Schizochytrium sp. na dieta, ocorreu aumento do conteúdo de DHA e melhora da relação n-3/n-6 PUFA no músculo dos peixes. Portanto, a farinha de Schizochytrium sp. pode ser considerada uma fonte alternativa de DHA em dietas para a tilápia-do-nilo.Abstract : The aim of this study was to evaluate Schizochytrium sp. dried meal (All-G-Rich®) as an alternative source of docosahexaenoic acid (DHA) in diets for Nile tilapia juveniles, regarding whole body retention of fatty acids and the muscle fatty-acid profile. Schizochytrium sp. dried meal was tested at four concentrations (0.5, 1.0, 2.0, and 4.0% diet, dry matter basis) and, in addition, a diet without Schizochytrium sp. dried meal (0% All-G-Rich®), in a completely randomized design (CRD) with five replicates. Furthermore, the diet with 1% of Schizochytrium sp. was also compared to a control diet, containing an equivalent content of DHA, given as 1.7% cod liver oil, dry matter basis (CLO), in CRD with five replicates. Tilapia juveniles (8.35 ± 0.80 g) were fed twice a day to apparent satiety, in 100-L experimental units, stocked with 25 fish each, in a recirculation system with controlled water temperature (28°C), during 57 days. There was a reduction in apparent body retention of DHA and total n-3 PUFA fatty acids and an increase in apparent body retention of a-LNA, LOA and total n-6 PUFA as the dietary concentration of Schizochytrium sp. increased. The muscle fatty-acid profile was affected by the increasing concentration of Schizochytrium sp. dried meal in the diet, with an increase in DHA, a-LNA, n-3 PUFA and n-3 LC-PUFA, and a decrease in MUFA, n-6 PUFA and n-6 LC-PUFA. When comparing the apparent body retention of fatty acids between fish fed the two DHA-equivalent sources in the diet, Schizochytrium sp. and CLO, we registered higher apparent body retention for DHA, a-LNA, LOA, PUFA n-3 and PUFA n-6 in fish fed CLO. Similarly, tilapia fed the CLO diet showed higher DHA, n-3 PUFA, and n-3 LC-PUFA contents, as well as lower SFA, PUFA n-6 and LC-PUFA n-6 contents in the muscle. In conclusion, despite the reduction on apparent body retention of DHA in Nile tilapia juveniles with the increase of Schizochytrium sp. dried meal in the diet, there was an increase in DHA content and an improvement in the n-3/n-6 PUFA ratio in the fish muscle. Therefore, Schizochytrium sp. dried meal could be considered as an alternative source of DHA in diets for Nile tilapia

    Conectividade entre os mercados acionários da américa latina e dos EUA na presença da pandemia de Covid-19

    Get PDF
    Objective - This paper aims to revisit the relationship between the Latin American and U.S. stock markets during the Covid-19 pandemic. Methodology- The dynamic connectivity between these markets was estimated by implementing the time-varying VAR model (TVP-VAR) for daily data from January 2010 to June 2021. Results - There are three main results. First, although spillovers from each market accounted for most of their variance, exchanges were not entirely independent of each other. Second, the U.S. and Brazil were net transmitters of spillovers, while Argentina and Chile were net receivers. Finally, the magnitude of net spillovers is not high enough to characterize a contagion effect. Practical implications - The inclusion of Latin American stock markets in the scope of Covid-19 studies is an important contribution to the literature that often neglects Latin American markets in its samples. Originality - The study of the connection between markets in the presence of Covid-19 differs from most that focus exclusively on the impact of Covid-19. Understanding the relationship between Latin American and U.S. markets in the presence of a crisis unlike any that has occurred before can help investors in their investment strategies and policymakers, governments, and monetary authorities interested in the integration or disintegration between markets.Objetivo - Este artigo tem como objetivo revisitar a relação entre os mercados de ações da América Latina e dos Estados Unidos na presença da pandemia de Covid-19. Metodologia - A conectividade dinâmica entre esses mercados foi estimada pela implementação do modelo VAR variável no tempo (TVP-VAR) para dados diários de janeiro de 2010 a junho de 2021. Resultados - Existem três resultados principais. Em primeiro lugar, embora as repercussões de cada mercado fossem responsáveis ​​pela maior parte de sua variação, as trocas não eram inteiramente independentes umas das outras. Em segundo lugar, os EUA e o Brasil foram os transmissores líquidos de spillovers, enquanto a Argentina e o Chile foram os receptores líquidos. Finalmente, a magnitude dos spillovers líquidos não é alta o suficiente para caracterizar um efeito de contágio. Implicações práticas - A inclusão dos mercados de ações latino-americanos no escopo dos estudos da Covid-19 é uma importante contribuição para a literatura que muitas vezes negligencia esses mercados em suas amostras. Originalidade - O estudo da conexão entre os mercados na presença da Covid-19 difere da maioria que se concentra exclusivamente no impacto da Covid-19. Compreender a relação entre os mercados da América Latina e dos EUA na presença de uma crise diferente de qualquer outra que tenha ocorrido antes pode ajudar os investidores em suas estratégias de investimento e formuladores de políticas, governos e autoridades monetárias interessados ​​na integração ou desintegração entre os mercados

    Análise do planejamento e controle da produção visto como um sistema compexo adaptativo

    Get PDF
    Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro Sócio-Econômico. Programa de Pós-Graduação em Administração.Nos dias atuais, um dos principais desafios organizacionais é a adaptação a um ambiente que se altera de maneira mais rápida do que as organizações, ainda presas ao paradigma mecanicista, conseguem acompanhar. Este trabalho nasceu da concepção de que os sistemas organizacionais tendem a não se comportar mais de forma linear. Assim sendo, sugere-se aqui uma nova abordagem, através da ótica da Teoria da Complexidade, no estudo e na análise do sistema de planejamento e controle da produção (PCP) das empresas. A Teoria da Complexidade sugere que as organizações e seus sistemas sejam vistos como sistemas complexos adaptativos (SCAs), sistemas estes que possuem como propriedade básica a adaptação, ou seja, são capazes de ajustar seu comportamento em função das alterações ocorridas em seu ambiente. Acredita-se que vislumbrar o PCP como sendo um SCA possa contribuir para que organizações dos mais diferentes setores possam obter insights significativos no gerenciamento de suas operações de produção. Para atingir os objetivos propostos no trabalho foi feita uma revisão teórica acerca dos pilares que sustentam o trabalho, o PCP e a Teoria da Complexidade. A partir desta revisão teórica foi elaborado um procedimento metodológico para coleta e análise dos dados. Em seguida, foi realizado um estudo multicasos em empresas do setor industrial. Os resultados obtidos evidenciam que as implicações da Teoria da Complexidade se fazem presentes na rotina de trabalho do PCP das empresas, ao se verificar a presença de aspectos característicos de SCAs no sistema de PCP das empresas. No entanto, deve-se ressaltar que esses mesmos aspectos podem ser mais desenvolvidos para que o sistema possa responder mais ativamente às alterações que acontecem em seu meio

    A participação da ELETROBRAS no PAC e seus impactos na infraestrutura energética nacional

    Get PDF
    TCC (graduação) - Universidade Federal de Santa Catarina, Centro Sócio Econômico, Curso de Ciências Econômicas.O objetivo do presente trabalho é demonstrar a importância dos investimentos realizados pelo ?Plano de Aceleração do Crescimento? através do sistema Eletrobras quanto à melhora da infraestrutura nacional. Como forma de compreender a importância destes investimentos procurou-se realizar uma breve exposição sobre o que é o PAC, o que se propõe as obras mais relevantes para o setor elétrico entre outras informações. Além disso, fez-se uma caracterização do setor elétrico para compreender a dinâmica do setor bem como seu comportamento perante aos demais setores da economia, assim como uma apresentação do sistema Eletrobras e sua importância para o setor energético nacional. Por fim procurou-se demonstrar de que maneira investimentos no setor energético acabam impactando as demais atividades na economia e contribuem para ganhos de produtividade e logísticos

    Estimações das temperaturas no torneamento usando problemas inversos em medições por termovisor e termopares

    Get PDF
    Machining plays an important role in the manufacturing of mechanical parts. This work analyzes specifically the turning, which is one type of the machining processes. When it is studied the general aspect of turning, one realizes high efforts acting on the cutting zone. The high efforts along with the small dimensions of the insert-chip contact area contribute to the development of high cutting temperatures. Furthermore, the temperature is an important factor associated with the wear of cutting tools. The focus of the work was to analyze the temperatures developed at the insert-chip interface. It was used in the analysis a model assembling the shim, tool holder, clamp and cutting tool. This model was represented threedimensionally. The solution of the problem was divided into two parts: one applying inverse techniques, and another with the solution of the direct problem. It was used as inverse techniques the Nonlinear Function Specification Method (NFSM) and the Time Traveling Regularization (TTR). These techniques were applied by using LiveLink for MATLAB®, which integrates COMSOL® with MATLAB®. The direct solution of the problem relates to solving the three dimensional non-linear transient diffusion equation. Among the boundary conditions of the direct problem, one is the heat flux imposed at the insert-chip contact area. This heat flux is essential for the solution of the problem. In general, this heat flux allows the direct problem to estimate temperatures; these estimations are then applied into the inverse problem and compared to experimental values of temperature. Comparing the estimated temperatures with the experimental ones provided new information about the heat flux, which was updated and again used into the direct problem. For the experiments it was used an insert of cemented carbide. Thermocouples and a thermal imaging camera were used for temperature measurements. The results of the simulations were analyzed and compared to experimental values. Comparisons were made between the heat flux values estimated by the NFSM and by the TTR. In addition were highlighted the differences in estimations regarding the use of thermal camera or thermocouples in the inverse problem approach.A usinagem desempenha um papel importante na fabricação de peças mecânicas. Este trabalho analisa especificamente o torneamento, o qual é um dos processos de usinagem. Quando se analisa o aspecto geral no torneamento percebe-se altos esforços atuando na região de corte. Os altos esforços junto às pequenas dimensões do contato cavaco-ferramenta contribuem no desenvolvimento de altas temperaturas de corte. Além disso, a temperatura é um fator crucial associado ao desgaste da ferramenta. O foco deste trabalho foi de analisar as temperaturas na interface cavaco-ferramenta. O modelo tridimensional de análise para as temperaturas agrupava o calço, o suporte da ferramenta, o grampo e a ferramenta. A solução do problema foi divida em duas partes: uma aplicando técnicas inversas, e a outra com a solução do problema direto. As técnicas inversas usadas foram a Função Especificada Não Linear e a Regularização de Viagem no Tempo. Essas técnicas foram aplicadas através da ferramenta LiveLink que integra o COMSOL® e o MATLAB®. A solução direta do problema envolve resolver a equação da difusão de calor tridimensional não linear em regime transiente. Dentre as condições de contorno do problema direto encontra-se a de fluxo de calor imposto no contato cavaco-ferramenta. Esse fluxo de calor desempenha um papel fundamental na resolução do problema. Em aspectos gerais, esse fluxo de calor permitia ao problema direto fornecer estimações de temperaturas que eram comparadas com os valores experimentais. Na experimentação foi usada uma ferramenta de metal duro. Termopares e uma câmera termográfica foram os responsáveis pelas medições das temperaturas. Os resultados das simulações foram analisados e comparados com os valores obtidos experimentalmente. Realizou-se uma comparação entre os fluxos de calor estimados pela Função Especificada Não Linear e pela Regularização de Viagem no Tempo. Também pontuou-se diferenças quanto ao uso de câmera térmica ou termopares na abordagem do problema inverso

    Galerkin projected residual method applied to diffusion–reaction problems

    Get PDF
    A stabilized finite element method is presented for scalar and linear second-order boundary value problems. The method is obtained by adding to the Galerkin formulation multiple projections of the residual of the differential equation at element level. These multiple projections allow the generation of appropriate number of free stabilization parameters in the element matrix depending on the local space of approximation and on the differential operator. The free parameters can be determined imposing some convergence and/or stability criteria or by postulating the element matrix with the desired stability properties. The element matrix of most stabilized methods (such as, GLS and GGLS methods) can be obtained using this new method with appropriate choices of the stabilization parameters. We applied this formulation to diffusion–reaction problems. Optimal rates of convergency are numerically observed for regular solutions.Indisponível
    • …
    corecore