Yttria and Ceria Doped Zirconia Thin Films Grown by Pulsed Laser Deposition

The Yttria stabilized Zirconia (YSZ) is a standard electrolyte for solid oxide fuel cells (SOFCs), which are potential candidates for next generation portable and mobile power sources. YSZ electrolyte thin films having a cubic single phase allow reducing the SOFC operating temperature without diminishing the electrochemical power density. Films of 8 mol % Yttria stabilized Zirconia (8YSZ) and films with addition of 4 weight % Ceria (8YSZ + 4CeO2) were grown by pulsed laser deposition (PLD) technique using 8YSZ and 8YSZ + 4CeO2 targets and a Nd-YAG laser (355 nm). Films have been deposited on Soda-Calcia-Silica glass and Si(100) substrates at room temperature. The morphology and structural characteristics of the samples have been studied by means of X-ray diffraction and scanning electron microscopy. Films of a cubic-YSZ single phase with thickness in the range of 1-3 µm were grown on different substrates.Fil: Saporiti, F.. Universidad de Buenos Aires. Facultad de Ingeniería. Departamento de Ingeniería Mecánica. Grupo de Materiales Avanzados; Argentina;Fil: Juarez, R. E.. Universidad de Buenos Aires. Facultad de Ingeniería. Departamento de Ingeniería Mecánica. Grupo de Materiales Avanzados; Argentina;Fil: Audebert, Fernando Enrique. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Tecnologías y Ciencias de la Ingeniería; Argentina; Universidad de Buenos Aires. Facultad de Ingeniería. Departamento de Ingeniería Mecánica. Grupo de Materiales Avanzados; Argentina;Fil: Boudard, M.. Centre National de la Recherche Scientifique. Laboratoire des Matériaux et du Génie Physique; Francia

Effect of alloying elements in melt spun Mg-alloys for hydrogen storage

In this paper we report the effect of alloying elements on hydrogen storage properties of melt-spun Mg-based alloys. The base alloys Mg90Si10, Mg90Cu10, Mg65Cu35 (at%) were studied. We also investigated the effect of rare earths (using MM: mischmetal) and Al in Mg65Cu25Al10, Mg65Cu25MM10 and Mg65Cu10Al15MM10 alloys. All the melt-spun alloys without MM show a crystalline structure, and the Mg65Cu25MM10 and Mg65Cu10Al15MM10 alloys showed an amorphous and partially amorphous structure respectively. At 350˚C all the alloys had a crystalline structure during the hydrogen absorption-desorption tests. It was observed that Si and Cu in the binaries alloys hindered completely the activation of thehydrogen absorption. The partial substitution of Cu by MM or Al allowed activation. The combined substitution of Cu by MM and Al showed the best results with the fastest absorption and desorption kinetics, which suggests that this combination can be used for new Mg-alloys to improve hydrogen storage properties.Fil: Rozenberg, Silvia. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Tecnologías y Ciencias de la Ingeniería ; ArgentinaFil: Saporiti, María Fabiana Sonia. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Tecnologías y Ciencias de la Ingeniería ; ArgentinaFil: Lang, Julien. Université du Québec a Montreal; CanadáFil: Audebert, Fernando Enrique. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Tecnologías y Ciencias de la Ingeniería "Hilario Fernández Long". Universidad de Buenos Aires. Facultad de Ingeniería. Instituto de Tecnologías y Ciencias de la Ingeniería "Hilario Fernández Long"; ArgentinaFil: Botta, Pablo Martín. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Stoica, Mihai. Leibniz Institute for Solid State and Materials Research Dresden; AlemaniaFil: Huot, Jacques. Université du Québec a Montreal; CanadáFil: Eckert, Jürgen. The Erich Schmid Institute of Materials Science; Austri

Nanotecnología: ¿Revolución científico-tecnológica de pequeños riesgos?

La nanotecnología es un campo de las ciencias aplicadas dedicado al control y manipulación de la materia a nivel de átomos y moléculas, en un rango comprendido entre uno y cien nanómetros. Permite la creación de materiales, dispositivos y sistemas mediante el control de la materia a esa escala. En el campo de la Odontología se han desarrollado bio-sensores altamente especializados, que permitirían la identificación de enfermedades en la saliva. En un futuro cercano será clave su uso en el diagnóstico de enfermedades de alto impacto como el cáncer de mama, ovario y páncreas, enfermedad de Alzheimer, SIDA, diabetes y osteoporosis.Fil: Olmedo, Daniel Gustavo. Universidad de Buenos Aires. Facultad de Odontología. Cátedra de Anatomía Patologica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Tasat, Deborah R.. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad de Buenos Aires. Facultad de Odontología; ArgentinaFil: Cabrini, Rómulo L.. Universidad de Buenos Aires. Facultad de Odontología. Cátedra de Anatomía Patologica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Audebert, Fernando Enrique. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad de Buenos Aires. Facultad de Ingeniería. Departamento de Ingeniería Mecánica; ArgentinaFil: Guglielmotti, Maria Beatriz. Universidad de Buenos Aires. Facultad de Odontología. Cátedra de Anatomía Patologica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentin

Effect of Alloying Elements in Melt Spun Mg-alloys for Hydrogen Storage

In this paper we report the effect of alloying elements on hydrogen storage properties of melt-spun Mg-based alloys. The base alloys Mg90Si10, Mg90Cu10, Mg65Cu35 (at%) were studied. We also investigated the effect of rare earths (using MM: mischmetal) and Al in Mg65Cu25Al10, Mg65Cu25MM10 and Mg65Cu10Al15MM10 alloys. All the melt-spun alloys without MM show a crystalline structure, and the Mg65Cu25MM10 and Mg65Cu10Al15MM10 alloys showed an amorphous and partially amorphous structure respectively. At 350˚C all the alloys had a crystalline structure during the hydrogen absorption-desorption tests. It was observed that Si and Cu in the binaries alloys hindered completely the activation of the hydrogen absorption. The partial substitution of Cu by MM or Al allowed activation. The combined substitution of Cu by MM and Al showed the best results with the fastest absorption and desorption kinetics, which suggests that this combination can be used for new Mg-alloys to improve hydrogen storage properties

Electrical, photoelectrical and morphological properties of ZnO nanowire networks grown on SiO2 and on Si

ZnO nanofibre networks (NFNs) were grown by vapour transport method on Si-based substrates. One type of substrate was SiO2 thermally grown on Si and another consisted of a Si wafer onto which Si nanowires (NWs) had been grown having Au nanoparticles catalysts. The ZnO-NFN morphology was observed by scanning electron microscopy on samples grown at 600 °C and 720 °C substrate temperature, while an focused ion beam was used to study the ZnO NFN/Si NWs/Si and ZnO NFN/SiO2 interfaces. Photoluminescence, electrical conductance and photoconductance of ZnO-NFN was studied for the sample grown on SiO2. The photoluminescence spectra show strong peaks due to exciton recombination and lattice defects. The ZnO-NFN presents quasi-persistent photoconductivity effects and ohmic I-V characteristics which become nonlinear and hysteretic as the applied voltage is increased. The electrical conductance as a function of temperature can be described by a modified three dimensional variable hopping model with nanometer-ranged typical hopping distances

Comparative Study and Evaluation of Two Different Finite Element Models for Piston Design

The exposure of pistons to extreme mechanical and thermal loads in modern combustion engines has necessitated the use of efficient and detailed analysis methods to facilitate their design. The finite element analysis has become a standard design optimisation tool for this purpose. In literature two different approaches have been suggested for reducing the geometry of the cylinder and crank slider mechanism, to idealise piston finite element analysis load models,whilst trying to maintain realistic boundaries to obtain accurate results. The most widely used geometry is the combination of piston and gudgeon pin while the second geometry includes some portion of the connecting rod’s small end and cylinder in addition to the piston and gudgeon pin.No clear analyses have been made in literature about the relative effectiveness of the two approaches in terms of model accuracy. In this work both approaches have been carried out and analysed with respect to a racing piston. The results suggest that the latter approach is more representative of the load conditions that the piston is subjected to in reality