2,762 research outputs found
Monte Carlo model of the uncertainty of SEA loss factors
Finite Element Methods are widely used to model vibro-acoustic systems, but as the modal density becomes higher this type of model becomes inaccurate and impractical. This is why in the high modal density region the use of Statistical Energy Analysis (SEA) models has become increasingly popular. SEA has some obvious advantages such as its simple formal expression, being based on linear equation systems or the reduced number of variables involved. But SEA has drawbacks as well, such as the absence of local information or the necessity of frequency averaging. A key quantity in SEA models is the loss factor. This takes into account the energy dissipated within a given subsystem or when power flows from one subsystem to another. Even though analytical expressions exist for a number of subsystems of differing nature, the measurement of the loss factor is still advisable and a necessity for a large number of cases. The most commonly used method of measuring loss factors is the Power Injection Method. This method is based on the injection of power into every single subsystem in sequence while the energy in each subsystem is measured. In spite of its simplicity, there remain a number of problems where the accuracy of the results is influenced by various practical issues. In this paper, a Monte Carlo model is used to describe the uncertainty of a two subsystemproblem consisting of two planar elements connected along one side. The influence of the input variables is studied and the conditioning of the coefficient matrix that model the system is also taken into accoun
Integração em sistemas de informação geogråfica da cartografia da SCN 10k como informação de base para os instrumentos de gestão territorial
Integração em sistemas de informação geogråfica da cartografia da SCN 10k como informação de base para os instrumentos de gestão territoria
IDRA (IDeal Resource Allocation): A tool for computing ideal speedups
Performance studies of actual parallel systems usually tend to concéntrate on the effectiveness of a given implementation. This is often done in the absolute, without quantitave reference to the potential parallelism contained in the programs from the point of view of the execution paradigm. We feel that studying the parallelism inherent to the programs is interesting, as it gives information about
the best possible behavior of any implementation and thus allows contrasting the results obtained. We propose a method for obtaining ideal speedups for programs through a combination of sequential or parallel execution and simulation, and the algorithms that allow implementing the method. Our approach is novel and, we argĂŒe, more accurate than previously proposed methods, in that a crucial part of the data - the execution times of tasks - is obtained from actual executions, while speedup is computed by simulation. This allows obtaining speedup (and other) data under controlled and ideal assumptions regarding issues such as number of processor, scheduling algorithm and overheads, etc. The results obtained can be used for example to evalĂșate the ideal parallelism that a program contains for a given model of execution and to compare such "perfect" parallelism to that obtained by a given implementation of that model. We also present a tool, IDRA, which implements the proposed method, and results obtained with IDRA for benchmark programs, which are then compared with those obtained in actual executions on real parallel systems
IDRA (IDeal Resource Allocation): Computing ideal speedups in parallel logic programming
We present a technique to estimate accurate speedups for
parallel logic programs with relative independence from characteristics of a given implementation or underlying parallel hardware. The proposed technique is based on gathering accurate data describing one execution at run-time, which is fed to a simulator. Alternative schedulings are then simulated and estimates computed for the corresponding speedups. A tool implementing the aforementioned techniques is presented, and its predictions are compared to the performance of real systems, showing good correlation
Air gap influence on the vibro-acoustic response of Solar Arrays during launch
One of the primary elements on the space missions is the electrical power subsystem, for which the critical component is the solar array. The behaviour of these elements during the ascent phase of the launch is critical for avoiding damages on the solar panels, which are the primary source of energy for the satellite in its final configuration. The vibro-acoustic response to the sound pressure depends on the solar array size, mass, stiffness and gap thickness. The stowed configuration of the solar array consists of a multiple system composed of structural elements and the air layers between panels. The effect of the air between panels on the behaviour of the system affects the frequency response of the system not only modifying the natural frequencies of the wings but also as interaction path between the wings of the array. The usual methods to analyze the vibro-acoustic response of structures are the FE and BE methods for the low frequency range and the SEA formulation for the high frequency range. The main issue in the latter method is, on one hand, selecting the appropriate subsystems, and, on the other, identifying the parameters of the energetic system: the internal and coupling loss factors. From the experimental point of view, the subsystems parameters can be identified by exciting each subsystem and measuring the energy of all the subsystems composing the Solar Array. Although theoretically possible, in practice it is difficult to apply loads on the air gaps. To analyse this situation, two different approaches can be studied depending on whether the air gaps between the panels are included explicitly in the problem or not. For a particular case of a solar array of three wings in stowed configuration both modelling philosophies are compared. This stowed configuration of a three wing solar arrays in stowed configuration has been tested in an acoustic chamber. The measured data on the solar wings allows, in general, determining the loss factors of the configuration. The paper presents a test description and measurements on the structure, in terms of the acceleration power spectral density. Finally, the performance of each modelling technique has been evaluated by comparison between simulations with experimental results on a spacecraft solar array and the influence on the apparent properties of the system in terms of the SEA loss factors has been analyse
Esophageal cancer: Risk factors, screening and endoscopic treatment in Western and Eastern countries
Esophageal cancer is one of the most unknown and deadliest cancers worldwide, mainly because of its extremely aggressive nature and poor survival rate. Esophageal cancer is the 6th leading cause of death from cancer and the 8th most common cancer in the world. The 5-year survival is around 15%-25%. There are clear differences between the risk factors of both histological types that affect their incidence and distribution worldwide. There are areas of high incidence of squamous cell carcinoma (some areas in China) that meet the requirements for cost-effectiveness of endoscopy for early diagnosis in the general population of those areas. In Europe and United States the predominant histologic subtype is adenocarcinoma. The role of early diagnosis of adenocarcinoma in Barrettâs esophagus remains controversial. The differences in the therapeutic management of early esophageal carcinoma (high-grade dysplasia, T1a, T1b, N0) between different parts of the world may be explained by the number of cancers diagnosed at an early stage. In areas where the incidence is high (China and Japan among others) early diagnoses is more frequent and has led to the development of endoscopic techniques for definitive treatment that achieve very effective results with a minimum number of complications and preserving the functionality of the esophagus
Evaluation of the quality of Quickbird fused products
International audienceMost of the satellite sensors, presently operating in the optical domain, are providing a data set comprising multispectral images at a low spatial resolution and images at a higher spatial resolution but with a lower spectral content. The trend of satellite sensors is similar to the present situation. The idea of fusing multispectral images with a highest spatial resolution enables the creation of useful products for a set of applications. This paper aims at evaluating a set of methods for construction of synthetic multispectral images having a highest spatial resolution available within the data set. These methods are evaluated through the construction of fused products from a set of Quickbird panchromatic and multispectral images. Of interest are the most used methods: the Intensity-Hue-Saturation method, the Brovey transform, the multiplicative methods and a set of methods derived from the ARSIS concept. The different methods are shortly presented. These methods are tested in a dataset from the area of Madrid. The dataset proposed a good diversity of landscape allowing the measure of the impact of fusion methods on different cases. The resulting images are evaluated through visual criteria from a set of photointerpreters. They classified the fused products and pro-vided a ranking for the visual quality. Then the proposed protocol defined by Wald et al. (1997) is applied to all methods. A set of quantitative parameters is computed allowing an objective comparison of the results. Finally a new parameter allowing the quantification of the information brought by the fusion method is proposed. This parameter is based on the analysis of the difference of the real structures of a multispectral image and of the computed structures of the fused products. It is applied to the different methods and favors the evaluation of the impact of an algorithm on the resulting images. Some conclusions are drawn on the ranking of the different methods and on the appropriate parameters for the evaluation of the quality of fused products
Antimicrobial activity of essential oils against Paenibacillus larvae
American foulbrood is a serious bacterial disease that affects Apis mellifera colonies;
the causative agent is Paenibacillus larvae [1 ]. The aim of the study was to evaluate in
vitro the antimicrobial activity of 32 essential oils against P. larvae. Oils from 21 botanical
species were analyzed by gas chromatography (CG and CG/EM). All essential oils were
classified according to the composition of their main components in two groups: benzene
ring compounds (BRC) and terpene compounds (TC). Minimal inhibitory concentration
(MIC) in MYT broth [2] was assessed by the microdilution method. Final serial dilution
concentrations of the essential oils ranged between 2,000-12.5 mgll. The bacterial
isolates were collected from different Argentina's region. The chromatographic analysis
showed that a 67% of the essential oils contained predominately terpene compounds.
while the remaining 33% included mainly compounds with benzene rings. From the TC
group, Cymbopogon citratus essential oil showed the better antimicrobial activity against
P. larvae with MIC values between 150 and 250 mgl l. The essential oi ls from Aloysia
polystachya and Mentha spp. had the lowest inhibitory activity. Among the oils from the
BRC group, one of the lowest MIC values was found with cinnamon essential oil
(Cinnamomun zeylanicum) being between 25 and 50 mg/L; Origanum vulgare showed the
highest MIC values (350-400 mg/L). Essential oils, especially those with BRC in their
composition, presented inhibitory capacity against P. larvae strains
- âŠ