1,245 research outputs found
In-season calcium-spray formulations improve calcium balance and fruit quality traits of peach.
Experiments to evaluate the effect of in-season calcium (Ca) sprays on late-season peach (Prunus persica L. Batsch cv. Calrico) were carried out for a 2-year period. Calcium formulations (0.5% and 1.0% in 2008 and only 0.5% tested in 2009) supplied either as CaCl2 or Ca propionate in combination with two or three adjuvants (0.05% of the nonionic surfactants Tween 20 and Break Thru, and 0.5% carboxymethylcellulose, CMC) were sprayed four to five times over the growing season. Peach mesocarp and endocarp Ca concentrations were determined on a 15-day basis from the beginning of May until the end of June. Further tissue analyses were performed at harvest. A decreasing trend in fruit Ca concentrations over the growing season was always observed regardless of the Ca treatments. Both in 2008 and 2009, significant tissue Ca increments associated with the application of Ca-containing sprays in combination with adjuvants were only observed in June, which may be coincident with the period of pit hardening. In 2008, both at harvest and after cold storage, the total soluble-solids concentration (° Brix) of fruits supplied with Ca propionate (0.5% and 1.0% Ca) was always lower as compared to the rest of treatments. The application of multiple Ca-containing sprays increased firmness at harvest and after cold storage, especially when CaCl2 was the active ingredient used. Supplying the adjuvants Tween 20 and CMC increased fruit acidity both at harvest and after cold storage. Evaluation of the development of physiological disorders after cold storage (2 weeks at 0°C) indicated a lower susceptibility of Ca-treated fruits to internal browning. Fruits treated with multiple CaCl2-, CMC-, and Break Thru®-containing sprays during the growing season were significantly less prone to the development of chilling injuries as compared to untreated peaches
Monte Carlo model of the uncertainty of SEA loss factors
Finite Element Methods are widely used to model vibro-acoustic systems, but as the modal density becomes higher this type of model becomes inaccurate and impractical. This is why in the high modal density region the use of Statistical Energy Analysis (SEA) models has become increasingly popular. SEA has some obvious advantages such as its simple formal expression, being based on linear equation systems or the reduced number of variables involved. But SEA has drawbacks as well, such as the absence of local information or the necessity of frequency averaging. A key quantity in SEA models is the loss factor. This takes into account the energy dissipated within a given subsystem or when power flows from one subsystem to another. Even though analytical expressions exist for a number of subsystems of differing nature, the measurement of the loss factor is still advisable and a necessity for a large number of cases. The most commonly used method of measuring loss factors is the Power Injection Method. This method is based on the injection of power into every single subsystem in sequence while the energy in each subsystem is measured. In spite of its simplicity, there remain a number of problems where the accuracy of the results is influenced by various practical issues. In this paper, a Monte Carlo model is used to describe the uncertainty of a two subsystemproblem consisting of two planar elements connected along one side. The influence of the input variables is studied and the conditioning of the coefficient matrix that model the system is also taken into accoun
Avances en el control del bitter pit en manzano.
En este trabajo se realiza una sucinta recopilación de los últimos avances en la investigación aplicada al control del bitter pit en la Estación Experimental de Aula Dei (EEAD-CSIC). Se describen nuevas formulaciones y estrategias de aplicación foliar con calcio, un método físico postcosecha y el método de tinción selectiva de calcio en frut
Na+-dependent NO3- uptake in leaf cells of the seagrass Posidonia oceanica (L.) Delile
Posidonia oceanica (L.) Delile is an endemic Mediterranean seagrass of recognized ecological significance and, as other seagrasses, this species has secondarily adapted to live in the marine environment. In this alkaline medium with a high Na+ concentration (0.5 M), the high inwardly directed electrochemical potential gradient for sodium is used in the seagrass Zostera marina to energize the uptake of nitrate1 and phosphate that usually occur at concentration below 10 µM. Here we summarize several evidences for the operation of a sodium-dependent high-affinity nitrate transport system at the plasma membrane of the mesophyll leaf cells of P. oceanica.
Leaf cells of P. oceanica possess a H+-ATPase as a primary pump, exhibit a plasma membrane potential (Em) of -174 ± 10 mV and show reduced Na+ permeability. The addition of micromolar nitrate concentrations induces membrane depolarizations that show saturation kinetics. Curve fitting of the values renders a semisaturation constant (Km) of 21.3 ± 6.6 μM and a maximum depolarization (Dmax) of 7 ± 1 mV. In dark conditions, Dmax decreases by fifty percent but no significant effect is observed on the Km value. On the other hand, nitrate induced depolarizations show sodium dependence. The depolarizations induced by 100 µM NO3- in media containing increasing Na+ concentrations (from 0 to 250 mM) show saturation kinetics, rendering a Km value of 16 ± 5 mM Na+. Moreover, the depolarization induced by 100 µM NO3- is accompanied by a simultaneous increase of cytosolic sodium, measured by Na+-sensitive microelectrodes, of 0.4 ± 0.2 mM above the resting cytosolic sodium concentration (17 ± 2 mM).
Finally, nitrate uptake rates, measured in depletion experiments, decreases by 50% and 80% in dark conditions and in the absence of Na+, respectively, compared with control conditions (0.5 M Na+ and light).
All together, these results strongly suggest that NO3- uptake in P. oceanica leaf cells is mediated by a high-affinity nitrate carrier that uses Na+ as the driving ion.
1 Rubio et al. (2005). J. Exp. Bot, 412: 613-622.
Project Funding: CTM 2011-30356. (MEC)Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech
A Practical Type Analysis for Verification of Modular Prolog Programs
Regular types are a powerful tool for computing very precise descriptive types for logic programs. However, in the context of real life, modular Prolog programs, the accurate results obtained by regular types often come at the price of efficiency. In this paper we propose a combination of techniques aimed at improving analysis efficiency in this context. As a first technique we allow optionally reducing the accuracy of inferred types by using only the types defined by the user or present in the libraries. We claim that, for the purpose of verifying type signatures given in the form of assertions the precision obtained using this approach is sufficient, and show that analysis times can be reduced significantly. Our second technique is aimed at dealing with situations where we would like to limit the amount of reanalysis performed, especially for library modules. Borrowing some ideas from polymorphic type systems, we show how to solve the problem by admitting parameters in type specifications. This allows us to compose new call patterns with some pre computed analysis info without losing any information. We argue that together these two techniques contribute to the practical and scalable analysis and verification of types in Prolog programs
Influence of the notch-sharpening technique on styrene-acrylonitrile fracture behavior
The Centre Catala del Plastic and Universidad Rey Juan Carlos laboratories joined forces to investigate the effect of the notch-sharpening technique on the fracture parameters of styrene-acrylonitrile. Contact notch-sharpening techniques, such as razor tapping, razor sliding, and razor broaching, and a noncontact procedure, femtolaser, were analyzed. The fracture values of the samples with notches sharpened via contact techniques were divided into two groups: one with pop-in and the other with no pop-in in the load-displacement records; this resulted in the lowest and highest fracture toughnesses, respectively. The fracture parameters of the specimens with notches sharpened via a femtolaser were between those of the samples with notches sharpened via contact procedures in which pop-in occurred and those in which it did not. To explain these results, the crack front of the nontested specimens after sharpening was investigated in depth, we identified the type of damage and measured its size and the crack tip radii. The morphology of the crack front was related to the fractographic study.Postprint (author's final draft
Los instrumentos antiguos de los gabinetes de Física : propuesta de clasificación y estudio comparativo
Se han estudiado colecciones de instrumentos de física que formaron parte de los antiguos gabinetes escolares españoles. A fin de realizar contrastes, se han considerado igualmente manuales de física de la época, laboratorios de investigación y laboratorios escolares actuales. Para ello se ha aplicado un esquema clasificatorio basado en criterios didácticos. Se obtiene así un perfil global para cada colección que pone de manifiesto la existencia de varios patrones característicos. Tales aportaciones contribuyen a un mejor conocimiento de la enseñanza de la física en el pasado, especialmente en la España del siglo XIX.This article describes a study of collections of physics instruments in Spanish schools. In order to compare the collections, an analysis was performed of physics textbooks of the 19th century as well as of instruments in research laboratories, and modern school laboratories. For this purpose a classification scheme, based on didactic criteria, was applied. In this way, we obtained a profile for each collection, which highlights the existence of a set of characteristic patterns. The results of our study contribute to a deeper knowledge of how physics was taught in the past, and especially in Spain in the 19th century
A generic persistence model for CLP systems (and two useful implementations)
This paper describes a model of persistence in (C)LP languages and two different and practically very useful ways to implement this model in current systems. The fundamental idea is that persistence is a characteristic of certain dynamic predicates (Le., those which encapsulate
state). The main effect of declaring a predicate persistent is that the dynamic changes made to such predicates persist from one execution to the next one. After proposing a syntax for declaring persistent predicates, a simple, file-based implementation of the concept is presented and
some examples shown. An additional implementation is presented which stores persistent predicates in an external datábase. The abstraction of the concept of persistence from its implementation allows developing applications
which can store their persistent predicates alternatively in files or databases with only a few simple changes to a declaration stating the location and modality used for persistent storage. The paper presents the model, the implementation approach in both the cases of using files
and relational databases, a number of optimizations of the process (using information obtained from static global analysis and goal clustering), and performance results from an implementation of these ideas
Neuraminidase-activated microglia compromise the viability of ependymocytes
Neuraminidase (NA) is a sialidase present in the envelope/wall of some virus/bacteria responsible for brain infections, such as flu, mumps or meningitis. The intracerebroventricular injection of NA in the rat brain provokes ependymal detachment and death, and an acute inflammatory process. Although inflammation reverses, ependymal lining is not regenerated.
Complement system activation within the CSF contributes to ependymal damage, but is not the only cause (Granados-Duran et al, 2016). Here we aimed to investigate if microglial activation might also play a role. For this purpose we used pure isolated ependymocytes (Grondona et al, 2013) and ventricular wall explants, which were co-cultured with microglial cells, both in basal conditions and with agents that induce microglial activation: NA, LPS, or Pam3CSK4 (synthetic lipopeptide). The viability of the ependymal cells was assessed by trypan blue exclusion.
The viability of isolated ependymocytes was reduced when NA or LPS were added to the culture, compared to controls without additives. In the absence of microglia, NA or LPS did not compromise viability significantly, indicating that microglia was involved in ependymocytes death.
The addition of NA to cultured explants reduced ependymocytes viability only when microglial cells were present in the culture; a similar reduction was observed when LPS or Pam3CSK4 were added. Conversely, explants cultured in the absence of microglia did not suffer a significant decrease in ependymocytes viability upon NA addition to the medium.
We hypothesized that cytokines released by activated microglia, such as IL1β or TNFα, could mediate ependymocytes death. RT-PCR performed in RNA obtained from pure ependymocytes confirmed the presence of IL1β and TNFα receptors in ependymal cells. Nevertheless further experiments are required to confirm this hypothesis.
We conclude that microglia activated by NA mediates, at least in part, ependymal cell death, what might be relevant for neuroinflammatory diseases mediated by NA bearing virus/bacteria.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech
- …